PART D.  Printing documentation.

There are three sets of documents that you have to print.  The first one
only requires that you have in your printer enough paper to print 3 pages
so we will use it for a test of your printer compatibility.  If one of 
these steps doesn't work on your printer then there is no need to proceed
to the larger blocks of documentation.

1.  Put your PETE WORK DISK or DISK 1 master in drive A.  If you have an
    EPSON FX 80 or FX 100 or a printer with FX compatible graphics codes,
    enter PETE FXREF [and press enter and another keypress when prompted].

    Or, if you have an IBM Graphics printer or MX 80 or MX 100 with graftrax
    or a printer with MX compatible graphics codes,
    enter PETE MXREF [and press enter and another keypress when prompted].

2.  If either of the above steps worked, then enter PETE ABCREF [and press
    enter and another keypress when prompted].  This one takes 7 pages.

3.  Now put DISK 2 in drive A, make absolutely sure that you have at least
    50 sheets of printer paper and about an hour to kill, then
    enter MANUAL [and press return].