PERSONAL PORTFOLIO ANALYZER - RELEASE 2.1

To obtain directions on how to get these programs running, first make sure you
are in DOS.  You should see the prompt A> (or C> if you are on a hard disk).
Remove your DOS diskette, and insert the STARTUP diskette (or the STARTUP/PRO-
GRAM diskette if you have only a single diskette) in drive A.  Turn on your
printer and make sure it is ready to print.  Most printers have a ready light,
and it should be on.  Then type the following command just as it appears:

                           COPY A:PAVERS21.DOC LPT1:

and press the ENTER key.  Fourteen pages of information will be printed, and
the output will be paginated with pages numbered.

To get a "snapshot" printout of this screen, first make sure your printer is
ready and then press a shift key and the PrtSc key simultaneously.  The PrtSc
key on the IBM-PC keyboard is on the second row of keys up from the bottom row,
near the right-hand side under the ENTER key.  On other computers it may be in
a different position.  This procedure can be used to obtain a screen printout
at almost any time, except when the screen contains graphics.