.PL June 14, 1987 Technical Services Associates 277 Sandhurst Rd. Columbia, S.C. 29210 Dear Letrhead User; This is a sample letter to demonstrate the printing capabilities of LETRHEAD. If this file name is specified as option 8 in the data file variables menu and option 2 is toggled to 'Yes' in the letterhead variable menu, then this text will print after the logo. Another way to print letterhead and this text would be to use the batch command facility. At the DOS prompt simply enter the command: letrhead l letrhead.txt This will print the logo, letterhead and this text file regardless of the options set. If this were a two or more page letter, the logo and letterhead would be printed on only the first page. Refer to letrhead.doc for more information on this and other options. Sincerely, TSA 1 !!LETRHEAD!! June 14, 1987 Technical Services Associates Letter number two 277 Sandhurst Rd. Columbia, S.C. 29210 Dear Letrhead User; This second letter is to demonstrate the !!Letrhead!! command. This command can be embedded in the text and will cause the logo and letterhead to be reprinted, followed by the text of the second (or succeeding) letters. The word 'letrhead' in this command must be all upper or all lower case. A page break should immediately proceed the !!Letrhead!! code for proper spacing in the word processor and in the letrhead program. Envelopes may also be printed from this file. The command: letrhead e letrhead.txt will request that an envelope be positioned at the back edge of the printer platen. When the Enter key is pressed, the envelope will be fed into the printer, and the logo, return address, and mailing address will be printed. The program searches the first 35 lines of the text for something that looks like an address. Most of the time it is successful but check the results closely. It does not guarantee to find the address perfectly each time. To print these two letters followed by two envelopes, at the DOS prompt, enter the command: letrhead l letrhead.txt e letrhead.txt Give it a try on this text file. Remember, these same commands are available from within the program as well, using the menus and setting the necessary options. Try different combinations and experiment. Sincerely, TSA 2