* 1 0
.Search
;
With  this  menu  option, the  program  SCAN  will
search for all known Viruses.
;
Point  to note. Always  use the  newest version of
SCAN  to be  absolutely  certain of detecting and,
of course, destroying almost any known virus.
* 1 1
.Complete drive
;
You can call  SCAN to search  an entire drive with
the  default  parameters, or  to  search with  the
parameters  that  are  already  set by  you in the
"option menu".
;
* 1 2
.Complete Directory
;
You can  call  SCAN to search  an entire directory
with  the  default  parameters, or  to search with
the  parameters  that  are  already set  by you in
the "option menu".
;
* 1 3
.Single files
;
You can call SCAN to look  for  any data file with
the  default  parameters, or  to  search  with the
parameters that are  already  set  by  you, in the
"option menu". The default  mask is  *.* , but you
can change it to anything you wish to.
;
;
Choose  the  file  to  be searched in  the  panel,
that appears in the center of the screen.
* 1 4
.Read Report file
;
The report  file  "VIRUSPRG.DAT"  contains all the
errors that  SCAN  has  reported.    For  example,
information  on  viruses  which  have  been  found
during the search and in which file.
;
With  SCANTOOLs   built  in  file  viewer,  it  is
possible to  read  this  file  without  having  to
leave the program.
;
You can also get help in the view mode by pressing
F1-funktion key.
* 2 0
.Disinfect
;
This  main  menu  option  gives  you total control
over the removel  of  any  viruses  that have been
found with SCAN.
SCANTOOL  will  only  work   with  the   following
disinfection  programs  from the  McAfee Ass. :
 - SCAN
 - CLEAN-UP
 - M-DISK    #
;
# Please  be  sure  to  use  the correct version !
  IMPORTANT. Be sure to read the MDISK  Documenta-
  tion, which you  will find  on the  distribution
  disk !
* 2 1
.With CLEANup
;
SCANTOOL helps  you  to  remove  the found viruses
easily, using CLEAN-UP.
SCANTOOL  will show you a  list  of  the  possible
viruses.  Choose the  virus-name, which  has to be
removed.  You can  return  to  the  main  menu  by
pressing <ESC>.
If SCAN reports a  virus which is not contained in
the list, you have  to  use  CLEAN-UP from the DOS
prompt, i.e. exit  SCANTOOL  and remove the  virus
using CLEAN-UP or SCAN manually.
It may be, that the only  possibility you have, is
to use the SCAN /D option.
See the menu option "With SCAN /D.
* 2 2
.With SCAN /D
;
With  this option  SCAN  will  be called to remove
the virus, using the /D parameter.
Using this  option  SCAN  will  "Seek and Destroy"
all data in which a virus is found,in other words,
it will  simply  delete  the  file  containing the
virus.
* 2 3
.View Report file
;
The report  file  "VIRUSPRG.DAT"  contains all the
errors   that  SCAN  has   reported.  For example,
information   on  viruses  which  have  been found
during the search, and in where they are.
;
With  SCANTOOLs   built  in  file  viewer,  it  is
possible to  read  this  file  without  having  to
leave the program.
;
You can also get help in the view mode by pressing
F1-funktion key.
* 3 0
.Documentation
;
With  this  main menu option, you are able to view
the McAfee documentation (and more).
* 3 1
.Scantool text
;
This  file  contains  the  documentation  and  the
copyright notices. Please read this documentation.
;
;
You can also get help in the view mode by pressing
F1-funktion key.
* 3 2
.Scantool HELP! 
;
This  file  could contain  some tips and hints for
users who could not get off viruses with SCANTOOL.
;
The file is empty and can be edited by everyone.
;
You can also get help in the view mode by pressing
F1-funktion key.
* 3 3
.SCAN text
;
With  SCANTOOLs   built  in  file  viewer,  it  is
possible to  read  this  file  without  having  to
leave the program.
;
You can also get help in the view mode by pressing
F1-funktion key.
* 3 4
.CLEANUP Text
;
With  SCANTOOLs   built  in  file  viewer,  it  is
possible to  read  this  file  without  having  to
leave the program.
;
You can also get help in the view mode by pressing
F1-funktion key.
* 4 0
.CRC Check
;
SCAN will also check for new, unknown viruses with
the  Add Validation  and Check Validation options.
This  is  done  by  computing  a  code for a file,
appending it to the file,  and then validating the
file  against  that code.  If  the  file  has been
modified,  the  check  will  no  longer match, and
viral infection may  have  occurred. SCAN uses two
independently generated CRC:
           (Cyclic Redundancy Check)
checks that are added to  the end of program files
to do this.  Files  which are self-checking should
not be validated  since  this  will  "set off" the
program's  self-check.  Files  which  are  self-
modifying  may have different values for the same
program depending upon the modifications.
SCAN adds validation  codes to .COM and .EXE files
only.  The  validation  codes  for  the  partition
table, boot sector,  and system files, are kept in
a  hidden file  called  SCANVAL.VAL  in  the  root
directory.
;
Programs.
* 4 1
.Make checksum
;
With  this Menu Option, SCAN  will  do a CRC Check
of the file  or  directories  or  even  a complete
drive  of   your  choice.  This  will, of  course,
increase the  size of the file included in the CRC
check. Some  programs  include a self CRC Checking
routine, and  because  SCAN  has  written  the CRC
result into the file the program  may not function
afterwards.
In other words, great  care is  to  be taken  when
using this option.
* 4 2
.CRC Check
;
With this Option you can check all the  files that
SCAN has written the Checksum to.
If the file has no Checksum,SCAN will nevertheless
scan the file for viruses.
;
;
You can choose between :
   - Complete drives ( A: C:)
   - Complete directories
   - Single files
* 4 3
.Removal CRC Checksums
;
If you wish to  remove  the  CRC checksum from the
files this is your option.
After the sucessful removel  of the Checksum  SCAN
will prompt you to continue .
SCAN  calls  the  CRC  Checksum  : VALIDATIONCODE.
If there is no Checksum  to remove, SCAN will just
simply scan the file for  viruses  in  the  normal
way.
* 5 1
.General Information
;
Use checks or money orders for  registration and
not cash.
;
The registration address of  Mcafee's VIRUSCAN is
;
   McAfee Associates
   4423 Cheeney Street
   Santa Clara, CA 95054
   408 988 3832 (Telefon)
   408 970 9727 (Fax)
   408 988 4004 (BBS)
* 5 2
.Hotkeys
;
The  Hotkeys  are  shortcuts to the more important
functions of SCANTOOL .
F2  - Overall view of Hotkey Functions
;
F3  - SCAN Drive A:   Programs only
F4  -        ... A:   All Data
F5  -        ... B:   Programs only
F6  -        ... B:   All Data
;
F9  - License annoucement
F10 - Program End
* 5 3
.Registration
;
Print out the  registration form from SCANTOOL and
send it to the address on the form.
;
* 5 4
.License Scantool
;
Your first registration  key allows you to license
your SCANTOOL copy by yourself for exact one year.
Then a new license must be ordered from DEZET.
;
With this  option you can registrate you SCANTOOL-
copy by yourself. All  you  need is  your name and
your valid registration key.
;
After typing in those  two  strings  SCANTOOL will
finish. After  starting  again  the  unregistrated
version will become registrated.
;
You are allowed to give away your SCANTOOL copy -
but not your personal SCANTOOL.KEY file!!!
;
Please contact DEZET to  get a valid  registration
key for your name.
;
* 5 5
.Registered User
;
Every registered  user receives a copy of SCANTOOL
with his or  her name and address  built  in  as a
registration number.
;
Therefore,  resale  of  a  registered  version  is
not allowed.
* 5 6
.Authorised Dealers
;
This  document  is  a  list  of all the authorized
dealers  of McAfee  products (not SCANTOOL)  where
you can register your version of VIRUSCAN.
;
* 5 7
.Drive selection
;
This allows you to select  more than one floppy or
harddisk. This string  will be  written at program
end to the SCANTOOL.PRO  file  and  is used during
running time as MASK. (to remember: MASK is the 1.
choice when selecting drives)
;
* 6 0
.Setup
;
With  the  setup option you can configure SCANTOOL
to suit your  own  taste. Any  alteration you make
will be saved  in a file with the extension "PRO".
* 6 1
.Setup / Menu colour
;
You  can  change  the colour of the Pulldown menus
to  suit  your  own  taste. Choose the colours you
wish from the colour table.
;
Any  change  you  make will be immediately written
to the Setup file.
* 6 2
.Setup / color Background
;
You  can  change  the  colour  of  the  Background
to  suit  your  own  taste. Choose the colours you
wish from the colour table.
;
Any  change  you  make will be immediately written
to the Setup file.
;
* 6 3
.Setup / Window colours
;
You  can  change  the colour of the Pop-up Windows
to suit  your  own  taste. Choose the  colours you
wish from the colour table.
;
Any  change  you  make will be immediately written
to the Setup file.
* 6 4
.Setup / Help Windows
;
You  can  change the colour of the Help windows to
suit your  own  taste. Choose the colours you wish
from the colour table.
;
Any  change  you  make will be immediately written
to the Setup file.
* 6 5
.Setup / footnote colour
;
You can change the colour of the footnote panel at
the bottom of the  screen  to suit your own taste.
Choose the colours you wish from the colour table.
;
Any change you make will be immediately written to
the Setup file.
* 6 6
.Setup / menu shadow
;
You  can  switch  the menu shadowing for the whole
program, on or off.
;
Any change you make will be immediately written to
the Setup file.
* 6 7
.Setup / sCreen Saver
;
You  can  configure the the program, so that after
1 minute the screen will be blanked.
Therefore  you  don't  think  that  the screen has
really switched off,  a  little heart will flitter
across  the  screen.  To  return to  the  program,
press any key.
;
;
It  doesn't  matter  which key is pressed to leave
the screen saver, as the program itself,  does not
take any notice of it.
;
You  can  call  the  screen  saver  at any time by
pressing  CTRL - X.
* 6 8
.Setup/ Report file
;
The  report  file  "VIRUSPRG.DAT" contains all the
errors  that  SCAN   has  reported.  For  example,
information  on  viruses  which  have  been  found
during the search, and in where they are.
;
SCANTOOL  allows  you to view or print the Report-
file.
If  this switch  is  set to ON, and  SCAN  doesn't
find  anything,  it  will  nevertheless  create  a
file  called  "VIRUSPRG.DAT"  with  the  message :
;
no viruses found.
;
This  is not a good idea if you are working from a
write  protected  disk. In  this  case  you should
switch this option off.
──────────────────────────────────────────────────
  SCANTOOL Default is : Report file OFF.
* 6 9
.Setup/ Memory test
;
With  this  switch  you can speed up the search by
SCAN because the memory could not be checked.
;
NOTE. Some  viruses  are  memory  resident and can
therefore effect  the  operation  of the scan pro-
gram.
──────────────────────────────────────────────────
  SCANTOOL Default is : Memory test ON.
* 610
.Setup/ LZEXE-Test
;
This  switch  allows  SCAN  to  check  if the file
has been compressed  using LZEXE  from P. Ballard.
;
──────────────────────────────────────────────────
  SCANTOOL Default : LZEXE-Test OFF. 
* 611
.Setup/ test Extensions
;
This  parameter could  be useed  to  scan for more
file extensions than the defauld build in.
You can type in max. 3 new extensions. Please  use
the following mask:
;
.XXX .YYY .ZZZ
;
Please notice that after the last letter there  is
NOTHING !!!
;
──────────────────────────────────────────────────
  SCANTOOL Default : test Extensions OFF.
* 612
.Setup/ Complete test
;
With  this switch , SCAN will test all directories
and files  which may be on a disk.
This, of course, will take a little longer, but if
you  have, for example, GEM on your hard disk this
will also check *.APP files.
;
──────────────────────────────────────────────────
 SCANTOOL Default : Complete test OFF.
* 613
.Setup/ Repeat
;
With this  switch you can tell SCANTOOL  that  you
intent to  test  more  than  1 disk. In  this  way
you can easily check your  entire  disk collection
in one go.
;
──────────────────────────────────────────────────
 SCANTOOL Default : Repeat OFF.
* 614
.Setup/ Virus String
;
This  parameter  is  new  to SCAN - Version V71 so
that  you can search  for a virus string which you
can set in the file "VIRUSTRNG.DAT.
;
The original file you receive is empty .
;
For more information, please read the SCAN
Documentation .
* 615
.Setup/ Save Setup File
;
With  this  switch you can tell SCANTOOL wether or
not to  save  the  setup  file. If you are working
from  a write  protected disk,  the switch must be
OFF.
──────────────────────────────────────────────────
 SCANTOOL Default : Save Setup file  ON.
* 616
.Setup / Quit
;
With  this  option  you  can  leave  SCANTOOL. All
setup  details  and defaults  will be saved in the
file with the extension "PRO".
;
The  hotkey to leave the program quickly is ALT-X.
