 






                            ZARC  Ver 5.0

         An easy to use Zip manager.  It displays the current default
         directory and you simply tag the files you want zipped.

         Backup entire directory on multiple disks.

         Works ok with DOS 6 and doublespace.

                           ________________


         5 Files provided within this Zipfile:  ZARC-50.ZIP

         ZARC.EXE        (Main program)
         ZARC.TXT        (This file)
         REGISTER        Fill it out and send it with $$$
         LOGO            The BBS where you can get the latest versions

         FILE_ID.DIZ     These 2 files contain a description of this
         DESC.SDI        program for use when uploading to most BBS's.


 Note:   Use FILE_ID.DIZ as a description when uploading to BBS.


 SYSOPS:  Please delete all prior versions of ZARC from your BBS.
                           ________________

  SETUP:
         To use ZARC, The program PKZIP.EXE (R) must be on your disk,
         and preferably within a search path.
         If it is not in a search path, or if ZARC cannot find PKZIP,
         an error message will appear when attempting create a zip file.
         To understand more about the operation of PkZip, refer to the
         MANUAL supplied with PkZip.

         To View text files, The program 'LIST' needs to be in your
         search path.  It is called when viewing text files.
         For any additional information concerning the use of LIST,
         refer to the documentation supplied with LIST.  (LIST76B.ZIP)

         It is best to place PKZIP and LIST in a directory that is
         included in a search path.  The path is set as a statement
         in your AUTOEXEC.BAT file.
         Then you may place this program (ZARC) in the same directory
         and call both programs from which ever drive or directory you
         are working in.

         Note: if PkZip or LIST is called from a batch file, the batch
         file should NOT change directories or drive to access PkZip
         or LIST.   The search path will take care of it for you.
         Doing so will cause unpredictable results.









    Page 2


                                    HOWTO:

         After invoking ZARC, you may select files by tagging them with
         the spacebar, or pressing T to tag all the files. (U to untag)

         To Zip a selection of files:
         Select the files that you want to include in the zip-file by
         pressing the space-bar to tag, or un-tag the selections.
         The directory may have more than one page of files. Press PgDn
         or PgUp to change pages.  (also Home & End).
         The Arrow keys will move the highlighted file marker up or

         When pressing the spacebar, the highlighting marker moves down
         one place so as to tag many files easily.   When You reach the
         bottom line of files, it will automatically change to the next
         page if there are additional files there.

         When you are satisfied with your selection, press Z to display
         the ZIP MENU.
         This menu will give you the options for the ZIP operation.

         You may:
          * Create a new zipfile that will contain the selected files.

          * Update an existing ZipFile by adding new files to it, or
            replace an existing file within the Zip.

          * Freshen an existing ZipFile.  This means that PkZip uses the
            list of files from within the zipfile for consideration when
            freshening the Zip. If you specify filenames by tagging them
            then PkZip will only freshen or update the files tagged, IF
            they already exist within the zipfile, and only if the tagged
            file is different or changed from the original Zipped copy.
            If you do not tag any files, then PkZip will use the entire
            list from within the zipfile as a reference and will freshen
            them if the files on your disk have changed or are different
            from the ones within the zipfile. If the files have not been
            changed, or no match can be found with the names within the
            zip, then the message ' Nothing to do'  will appear.

          * Re-Date a ZipFile.   With this option, no files are added or
            updated.   Pkzip reads the date for all the files within the
            Zipfile, and selects the newest date.   Then it re-set's the
            Zipfile date to this date.
            Often times, you will find a zipfile with a recent date, and
            find that the files within have an older date.  This happens
            when BBS systems add their JUNK advertisement files to the
            Zipfile.
            Sometimes they RE-ZiP the files with a newer Zip version so
            as to compress the files better and faster. This also messes
            up the ZipDate.   See the section on DATE setting option.





  Page 3


  MOVE:
          * MOVE a file to a ZipFile.
            When using this option, All files added to a new or existing
            Zipfile, will be DELETED from the disk after confirming that
            the Zipfile was successfully generated or updated.
            This option is handy for those that want to save each days
            records in a Zipfile archive for easy retrieval, and start
            fresh each day.



  Changing directories:
            Change directory by highlighting the directory name with the
            up or down arrow keys and pressing ENTER.   When changing to
            a different directory, any tags will NOT be remembered.
            Change disk Drive by entering L to Log a new drive.


           To zip files in two or more directories, zip the desired files
           in the first directory, remembering the path & filename.
           Change to the 2nd directory. Tag the files desired, and when
           creating the zip, indicate the same path & filename used in the
           first directory.  The selected files will be added to the Zip.


          When you are finished selecting the files by tagging them, and
          if you are updating an existing ZipFile in the current directory,
          simply highlight that zipfile with the highlight bar before going
          to the ZipMenu.
          From the ZipMenu, select the zip function desired.  If a Zipfile
          was highlighted then that filename will be prompted for you.
          If it's the right filename, simply press enter. If it's not, then
          enter the proper name instead of the one displayed.

          Do not use any extension with the zipfile name.  It will default
          to .ZIP automatically.  In some cases, the zip extension may be
          needed.  If the selected Zip name already exist, a warning will
          be displayed.   This is a safety warning, and ZARC don't always
          know if you are attempting to make a new zip or updating an old
          one.

         If the file already exist, you can either add the tagged files
         to the existing zip, or update the existing zip if the file
         already existing within the zip.

         ZARC will exit and call PKZIP to create or update the zipfile
         with the files that were tagged.












  Page 4

  DATE:  The ZipDate used is determined by the date setting option.
         The date of an existing ZipFile can be set by pressing R from
         within the ZipMenu or it will be automatically done when you
         update the ZipFile by adding more files to it.

         To set the date option, press D and select a method.  This will
         be a temporary setting, and will return to the default each time
         ZARC is invoked.  Also if you log a new disk drive, you may have
         to set it again.

         There are 3 options:
           1.  Use today's date for the generated Zipfile.
           2.  Use the same date as existing ZipFile. (when updating file).
           3.  Use the date of the most recent file within the zipfile.
                (including the date of the file just added to the zip).

         To permanently pre-set the date, go to the directory that ZARC
         resides in and use the following command line:
       C:> ZARC /DATE

         This will bring you to the date setup menu.  Make a selection as
         shown above. This setting will be permanent. ZARC must be in the
         default directory for this setting.



  WORK DRIVE:
         While Zipping, or updating a Zipfile, a lot of disk space is
         required.  If you are short on disk space, (such as working on
         drive A), you may specify a work drive that pkzip will use while
         creating or updating a Zipfile.  Select this while in the ZipMenu
         or from the main menu.

         The work drive defaults to C: if it exist.
        Note: The work drive is NOT used while backing up a directory to
         multiple diskettes.


  SORT:  A sorting option will now let you sort the directory as displayed.
         This does NOT sort the disk. It only sorts the way it's displayed
         in ZARC.
         This is a simple type sort, and is often times slow, depending on
         the size of the directory, and the speed of your computer.
         Sorting was not the prime intent of ZARC, and therefore is only
         an afterthought for those who desire it.


  Shell: You may SHELL to dos by pressing F5 or Alt-J.   Remember, when
         shelling to dos, ZARC is still in memory.  It uses much of the
         available memory, leaving less for your shell operation.
         DO NOT load any TSR type programs while in a shell unless you
         remove it from memory before exit back to ZARC.

         You may change drives/directories while in a shell.
         Upon returning from the shell, the current directory will be
         logged and any tags from before the shell will not be remembered.




 Page 5

   BACKUP ENTIRE DIRECTORY to hard drive:
       Requires PKZIP version 2.04 or newer.
       To backup an entire directory, including all it's sub-directories
       and thier files, go directly to the backup menu by pressing B
       or choose B from the Zip Menu.

       The default / current directory is the directory that will be
       backed up.
       Tagging files here has no effect.  All files will be included in
       the created zip file, along with all sub-directories under it.
       The PARENT directory is not saved. only it's files & directories.

       You have 2 methods to create this backup.

         1.  Backup all files in the current directory to a zipfile and
             DO NOT delete the original files.

         2.  Backup all files by MOVING the files into the created Zip
             file, and delete these files from the directory.  Any sub-
             directories will also be deleted after the process is done.
             The default directory (parent) is not deleted.

             If the operation fails, for any reason, the files will not
             be deleted.


       After selecting the method, you will specify a file name for this
       backup.  You should specify the path for this file if you don't
       want it in the default directory.   IE:  C:\util\filename.zip


   BACKUP ENTIRE DIRECTORY to multiple diskettes:
       Follow the instructions as above except you must specify the drive
       with the filename.
       Anytime you specify drive A or B, you will be asked if the diskette
       should be formatted first.  ( recommended)

       After a diskette is filled, you will be asked to insert another
       diskette to continue the backup.

       Pressing Ctrl-C or Ctrl-Break during the Zipping operation will
       do no harm as the files are always deleted AFTER the operation
       is completed.


   BACKUP entire disk (root)
       A backup of the root directory will often result in an error
       of Insufficient memory.  Some computers will have no trouble.
       If you receive this error, don't be alarmed.  This method of
       backup is asking an awful lot from PkZip.


   RESTORING a backup:
      If you don't have VIP.EXE (the mate to ZARC), you may restore
      the backed up directory with the following command line:

      PKUNZIP -d ZIPFILE.ZIP  C:\destination

      If you backed up a directory called C:\WINDOWS  then you should
      restore it to C:\WINDOWS

      When restoring, always place the LAST disk of the backup set into
      the drive.

      Note VIP.EXE will do this for you very easily.  Look for it on BBS's




 Page 6

 Register:  The following commands are available in registered versions
            of ZARC.EXE only:

         V = View an ascii file.        ( uses list.com)
         Alt-V = Zip-View a zipped file.

         Registered versions can Zip-View  A zipped file to display the
         file names within the zipfile.
         To view the file names within a Zipfile, Highlight the zip file
         that you want to view.  Press Alt-V.
         You can only Zip-View a file that has a .ZIP extension.

         Registration is required for commercial use of ZARC.EXE.

         Registration fee for individuals is  $ 10. U.S. funds.
         Registration fee for commercial, government or school use
         is $20.00

         All fees are to be made in U.S. exchange rate funds.
         Please enclose a self addressed envelope.

         All copyright rights reserved. ZARC.EXE shall remain the property
         of Al Richards,  Shawnee Mission,  Kansas  and registration of
         ZARC.EXE is a licence grant to use ZARC.EXE as needed.

         You may distribute ZARC in it's original Zipped form to BBS's
         and friends provided that this text file is included in the
         Zipfile as supplied and no files included in the Zip are modified
         in any way, including this text file.
         No registered version may be distributed or uploaded to any
         BBS under any circumstances.


         Disclaimer: Although tested, I will not be responsible for any
         loss or damage to any data on any computer and the user assumes
         all responsibility for it's use.
         I am also not required to furnish updated versions unless they
         become available, if any.


         If you try ZARC, and any problems occur, please let me know
         and tell me what kind of computer you have trouble with and
         the version of dos.
         I am always interested in, and like to receive comments about
         using ZARC.  Suggestions are always welcome.


         When registering, A unique registration code will be sent to
         you, and so far, this code will be good for all updates.
         Fill out the registration blank below.

         If you are already a registered user, The code for the previous
         version WILL work on ZARC-50






   Page 7


          Print or copy this page and use it for registration.



         (ZARC 5.0)
         Send your registration fee in U.S. funds exchange rate
         Include a self-addressed, stamped envelope.

          AL RICHARDS
          5201 ASH
          Shawnee Mission, Kansas
          66205-2114

          Your name __________________________________________________

          Address   __________________________________________________

          City, State, Zip ___________________________________________

          Company / Government name __________________________________

          Phone Number   (    ) ______________________________________

          What BBS did you get Zarc from ? ___________________________

          Type of computer & Dos version  ____________________________

                    ------------------------------------

          Check the lines that apply below:             (U.S. Funds)

          ___  Registration (individual use)          ($ 10. enclosed)

          ___  Commercial, Government, School use.    ($ 20. enclosed)

          ___  Send Current or latest version.        ($ 5. Additional)
                   ( on  3 1/2" diskette only)

          Important:
          Enter on the line below, the registration name (or company name)
          EXACTLY as you want it to be displayed on the screen.
            (15 characters limit)

          It is CASE sensitive, so use UPPER and / or lower case
          characters as needed.

            (Please PRINT clearly)

            __ __ __ __ __ __ __ __ __ __ __ __ __ __ __    (ZARC 5.0)