                  - TommySoftwareŽ CAD/DRAW Version 2.04 -


                    V E N D O R    I N F O R M A T I O N
                   ======================================

                         Last updated: May 1995

This file provides information for Shareware Distributors, Disk Vendors and
Computer Clubs who wish to distribute the TommySoftwareŽ CAD/DRAW package.

-----------------------------------------------------------------------------
                    Description of TommySoftwareŽ CAD/DRAW
-----------------------------------------------------------------------------
Powerful CAD and drawing application for
Windows 3.1. Features are:
 - Associative dimensioning,
 - User defined hatchings,
 - Library mamangement,
 - Context sensitive help.
It can be used to draw just about anything, using it's own drawing
tools, multiple layers, and color support. Based on the best selling
CAD program in Germany, this English version is easier to use and more
powerful than any other CAD program available in shareware. By
TommySoftware.

-----------------------------------------------------------------------------
                          Distribution Requirements
-----------------------------------------------------------------------------

Individuals who wish to distribute the TommySoftwareŽ CAD/DRAW package to
friends or associates may do so as long as all files remain intact and no
fees are charged.

-----------------------------------------------------------------------------
 IF YOU DISTRIBUTE THIS PROGRAM ON MORE THAN 1 FLOPPY READ NOTES AT BOTTOM!
-----------------------------------------------------------------------------

Computer Clubs and User Groups wishing to add the TommySoftwareŽ CAD/DRAW
package to their disk library may do so in accordance with the Distribution
Restrictions listed below.

( If you would like your Computer Club or User Group to be placed on our
  mailing list for future upgrades to any of our products, please contact
  your country's TommySoftwareŽ partner. For the address of the TommySoftwareŽ
  partners, see the end of this text. )


Limited Distribution License
----------------------------

As the exclusive copyright holder for TommySoftwareŽ CAD/DRAW, the local
TommySoftwareŽ partner authorizes distribution only in accordance with the
following restrictions.

ASP Approved Vendors in good standing are hereby given permission to distri-
bute TommySoftwareŽ CAD/DRAW by means of catalog, or BBS. Any other form of
commercial distribution by anyone requires prior permission.

Non-ASP member vendors must request permission prior to distributing this
package.

                              - Page 1 of 5 -
                  - TommySoftwareŽ CAD/DRAW Version 2.04 -

The TommySoftwareŽ CAD/DRAW package is defined as containing all the material
listed in the PACKING.LST text file. If any files listed in the PACKING.LST
text file, or the PACKING.LST file itself, are missing, then the package is
not complete and distribution is forbidden. Please contact us to obtain a
complete package suitable for distribution.

The TommySoftwareŽ CAD/DRAW package - including all related program files and
documentation files - CANNOT be modified in any way and must be distributed
as a complete package, without exception. The PACKING.LST text file contains
a list of all files that are part of the TommySoftwareŽ CAD/DRAW package.

( Small additions to the package, such as the introductory or installation
  batch files used by many shareware disk vendors, are acceptable as long as
  the final installation of TommySoftwareŽ CAD/DRAW is still performed by
  means of the original program SETUP.EXE. )

No price or other compensation may be charged for the TommySoftwareŽ CAD/DRAW
package. A distribution fee may be charged for the cost of the diskette,
shipping and handling, as long as the total (per disk) does not exceed
US$ 10.00 in the U.S. and Canada, or US$ 12.00 internationally.


Disk Sets & CD-ROMs
-------------------

The TommySoftwareŽ CAD/DRAW package CANNOT be sold as part of some other
inclusive package. Nor can it be included in any commercial software packaging
offer, without a written agreement from the local TommySoftwareŽ partner and
and TommySoftwareŽ. This includes any sales in a retail environment.

Vendors (non-ASP Vendor Members) who wish to distribute the TommySoftwareŽ
CAD/DRAW package as part of a collection (such as a multi-program set, or a
CD-ROM package) must obtain permission from the local TommySoftwareŽ partner
or TommySoftwareŽ prior to beginning such a distribution.

If you wish to add any of our programs to a CD-ROM or other collection, please
check the release date of the version you have. If the version is over twelve
(12) months old then please contact us to ensure that you have the most current
version. This version was released in May 1995.


Disk-of-the-Month (or Subscription) Distribution
------------------------------------------------

If you would like to distribute the TommySoftwareŽ CAD/DRAW package as a
Disk-of-the-Month, or as part of a subscription or monthly service, then the
following restrictions apply:

 - ASP Associate (Disk Vendor) Members in good standing are hereby given
   permission to distribute the current TommySoftwareŽ CAD/DRAW package under
   the Disk-of-the-Month style of distribution.

 - Others (non-ASP Members) must contact the local TommySoftwareŽ partner in
   advance to ensure that you have the most current version of the software.

 - You cannot use a Disk-of-the-Month distribution to use up your inventory
   of old (out of date) disks. Only current versions may be shipped as
   Disk-of-the-Month disks.

The PRINTED User's Guide may not be reproduced in whole or in part, using
any means, without the written permission of TommySoftwareŽ. In other words,
the disk-based documentation may not be distributed in PRINTED (hardcopy)
form.

The TommySoftwareŽ CAD/DRAW package cannot be "rented" or "leased" to others.

                              - Page 2 of 5 -
                  - TommySoftwareŽ CAD/DRAW Version 2.04 -

You may not list any of our products in advertisements, catalogs, or other
literature which describes our products as "FREE SOFTWARE". Shareware is
"Try-Before-You-Buy" software, it is not free.

TommySoftwareŽ prohibits the distribution of outdated versions of the
TommySoftwareŽ CAD/DRAW package by anyone, without written permission from
TommySoftwareŽ. If the version you have is over twelve (12) months old, please
contact us to ensure that you have the most current version. This version was
released in May 1995.

Licensee shall not use, copy, rent, lease, sell, modify, decompile,
disassemble, otherwise reverse engineer, or transfer the licensed program
except as provided in this agreement. Any such unauthorized use shall result
in immediate and automatic termination of this license.

( U.S. Government Information:  Use, duplication, or disclosure by the U.S.
  Government of the computer software and documentation in this package shall
  be subject to the restricted rights applicable to commercial computer
  software as set forth in subdivision (b)(3)(ii) of the Rights in Technical
  Data and Computer Software clause at 252.227-7013 (DFARS 52.227-7013). The
  Contractor/manufacturer is TommySoftware North America Inc., 130 Barrow
  Street, New York, NY 10014. )

All rights not expressly granted here are reserved to TommySoftwareŽ.

-----------------------------------------------------------------------------
    NOTICE FOR PREPARING AND SEPARATING CAD/DRAW FILES FOR DISTRIBUTION:
-----------------------------------------------------------------------------

If you distribute TommySoftwareŽ CAD/DRAW on diskette, and will put the full
program on one 1.44 MB (3.5 inch) diskette, please put all files onto the
diskette for your customers.

If you upload to a bulletin board, please archive all files of the package
into one archive by means of PKZIP. The resulting archive should be titled
TSCD20.ZIP. In addition, the files FEATURE.TXT and README.TXT sould be
uploaded again in a second, small archive that can be downloaded by users that
just want some information about the program. We appreciate you helping us
distribute our programs!

If you distribute TommySoftwareŽ CAD/DRAW and wish to separate it onto more
than one diskette, you must do the following:

 - Copy the files INSTALL.EXE, INSTALL.EXX, INSTALL.INF, INSTALL.DAT,
   FILE_ID.DIZ, README.TXT and TSCD2A.PFD onto the first diskette.
 - Copy the file TSCD2B.PFD onto the second diskette.

This applies to 720 KB (3.5 inch) diskettes as well as to 1.2 MB (5.25 inch)
diskettes. A distribution of TommySoftwareŽ CAD/DRAW on 360 KB (5.25 inch)
diskettes is not possible.


Please Help Us Serve You Better
-------------------------------

We would appreciate copies of anything you print regarding TommySoftwareŽ
CAD/DRAW. Please send us a copy of any review, article, catalog description,
or other information you print or distribute regarding the TommySoftwareŽ
CAD/DRAW package. Thank you for your time and assistance and for supporting
the shareware marketing concept.

Thank you for your support!

                              - Page 3 of 5 -
                  - TommySoftwareŽ CAD/DRAW Version 2.04 -

TommySoftwareŽ local partners (May 1995)
----------------------------------------

Australia:
  BRIGHTSPARK                   Telefon 1-800-803-704 Toll free (Orders only!)
  Unit 7,                       Telefon (09) 375-1178
  10-12 Dewar Street            Fax (09) 375-1668
  (cnr Marchant Way),           CompuServe 100033,1124
  Morley, WA 6062

Austria:            - German Version only-
  Husco Austria                 Phone (1) 505 4311-11
  Boesendorferstrasse 4         Fax (1) 505 9406-21
  A-1010 Wien

Belgium:
  TRAX                          Phone (0 50) 200 735
  Steenstraat 61                Fax (0 50) 200 735
  B-8211 Zedelgem-Aartrijke     CompuServe 100031,3552

Denmark:
  PRO SOFT                      Phone 53 61 90 42
  Benloese Skel 4G              Fax 53 61 93 91
  DK-4100 Ringsted              BBS 57 67 17 47 (Free Download)
                                CompuServe 100065,1744

France:
  DP Tool Club                  Phone 200 53 566
  B.P. 745                      Fax 200 53 827
  99 rue Parmentier             CompuServe 100012,1410
  F-59657 Villeneuve d'Ascq

Germany:            - German Version only -
  TommySoftwareŽ
  Abt. Shareware                Fax (0 30) 621 40 64
  Selchower Strasse 32          CompuServe 100142,3665
  D-12049 Berlin

Great Britain:
  The Thompson Partnership      Telephone  01889 564601
  Lion Buildings                Telefax    01889 563219
  Market Place                  CompuServe 70007,5560
  UTTOXETER                     Internet   sales@ttp.co.uk
  Staffs, ST14 5DE

Italy:
  MASLED INFORMATICA            Phone (06) 92 71 733
  Via dei Pioppi 9              Fax (06) 92 71 733
  I-04011 Aprilia (LT)

Japan:
  Personal Data Factory         Phone 0270-21-1423
  Shimoueki-cho 451-3,          Fax 0270-26-1636
  Isesaki-shi,                  CompuServe 101153,21
  Gunma-ken 372

                              - Page 4 of 5 -
                  - TommySoftwareŽ CAD/DRAW Version 2.04 -

Netherlands:
  CopyCats                      Phone 02207 45993
  Postbus 1088                  Fax 02207 45993
  NL-1700 BB Heerhugowaard      CompuServe 100121,1562

New Zealand:
  Micro South                   Phone (03) 365 1309
  c/o Bytes & Nibbles Shareware Fax (03) 365 1309
  PO Box 32-143
  Christchurch

Philippines:
  E & J Global Enterprise       Phone (632) 817 5410
  Eduardo C. De Guzman          Fax (632) 817 5410
  MCPO Box 2336, Makati
  1263 Metro Manila

Singapore:
  ProjectLynx                   Phone 336 6704
  Systems & Services            Fax 336 8589
  Circuit Road P.O.Box 23
  Singapore 9137

Sweden:
  Megatec                       Phone 0503-40330
  Kalabratsvaegen 14            Fax 0503-40033
  S-54492 Hjo

Switzerland:        - German Version only -
  Software News!                Phone (061) 313 45 45
  Marc Tanner                   Fax (061) 313 42 02
  Sissacherstrasse 57           Mailbox (061) 313 45 39
  CH-4052 Basel                 CompuServe 100045,1002
                                Internet softnews@semafor.ch

Switzerland:        - English Version only -
  Usoft                         Phone 022/366 48 78
  Case postale 8                Fax 022/366 48 02
  CH-1261 Genolier              CompuServe 100020,152

USA:
  TommySoftware,
  North America, Inc.           Phone 1 (212) 807 9720
  130 Barrow Street, #516       Fax 1 (212) 807 8149
  NY, NY 10014
  U.S.A.
___

Citizens from countries not stated above please contact one of the following
TommySoftwareŽ partners:

America, Europe, Asia       (English):  TommySoftware North America (see USA)
Europe                       (German):  TommySoftwareŽ          (see Germany)
Asia                       (Japanese):  Personal Data Factory     (see Japan)

                              - Page 5 of 5 -
