.LINK BEGIN:
Scheduler Overview Window
Edit Event Window
Event Option Window
File Window
Setup Window
Log File Viewer
Password Protected Area
New Password Window
Quit Window
.LINK END:
.TOPIC:
Contents

Click the mouse over one of the topics below for more
information.  Or press TAB to select a topic then press ENTER
to jump to it.

Scheduler Overview Window
Edit Event Window
Event Option Window

Using Dialog Boxes
Keystroke Help
Using Help

.TOPIC:
Scheduler Overview Window

The Task Scheduler runs events at specific times or intervals.  Events
can include programs, batch files and messages. 

The Task Scheduler is not a TSR and returns all memory to the system after
scheduled events are run.

Press F1 from any screen to receive specific help for that screen.

╔╣■├────────────────── Safetynet Scheduler - 3-26-94 3:34 PM ───────────╠╗
║  Next Event: Virus Scan Hard Disk                                      ║
║  Countdown:  8 hr 26 min                                               ║
║                                                                        ║
║  Events                    Scheduled               Action              ║
║ ┌────────────────────────────────────────────────────────────────────┐ ║
║ │ Virus Scan Hard Disk     Daily+ (Timeless)       Run: c:\vnpro\vn   ║
║ │                                                                      ║
║ │                                                                    ░ ║
║ │                                                                    ░ ║
║ │                                                                    ░ ║
║ │                                                                    ░ ║
║ │                                                                    ░ ║
║ │                                                                    ░ ║
║ │                                                                     ║
║ └────────────────────────────────────────────────────────────────────┘ ║
║ ┌───────┐ ┌───────┐ ┌───────┐ ┌───────┐ ┌───────┐ ┌───────┐ ┌───────┐  ║
║ │ Add...│ │Edit...│ │Copy...│ │Delete │ │Setup..│ │ Exit  │ │ About │  ║
║ └───────┘ └───────┘ └───────┘ └───────┘ └───────┘ └───────┘ └───────┘  ║
╚════════════════════════════════════════════════════════════════════════╝

Next Event: Displays the Description of the next event.
Countdown:  The time remaining until the Next Event runs.

┌───────┐
│ Add...│ Adds a new scheduler event
└───────┘
┌───────┐ 
│Edit...│ Edits the highlighted event
└───────┘ 
┌───────┐ 
│Copy...│ Adds a new event by copying the highlighted event
└───────┘ 
┌───────┐ 
│Delete │ Deletes the highlighted event
└───────┘ 
┌───────┐
│Setup..│ Accesses the scheduler Setup Window
└───────┘
┌───────┐ 
│ Exit  │ Exits the scheduler and prompts to save any changes
└───────┘ 
┌───────┐ Accesses the About window.  From the About window, scheduled
│ About │ events can be suspended and restarted by selecting the
└───────┘ Suspend Scheduled Events option.


.TOPIC:
Quit Window

If any changes are made to the Scheduler settings, when the program is
exited, the Exit Scheduler window will be displayed.  To save the
changes, place an X before the "Save changes before exiting" prompt.
To discard the changes, remove the X.  Select OK to end the program
or Cancel to return to the Scheduler Overview Window.

┌┤■├──────── Exit Scheduler ────────┐
│                                   │
│  [X] Save changes before exiting  │
│                                   │
│  ╔════════╗ ┌────────┐            │
│  ║   OK   ║ │ Cancel │            │
│  ╚════════╝ └────────┘            │
└───────────────────────────────────┘

.TOPIC:
Edit Event Window
The Edit Event Window allows you to customize the settings of the
scheduled event.  It is accessed from the Scheduler Overview Window.

╔╣■├─────────────────────────── Edit Event ────────────────────────────────╠╗
║                                                                           ║
║ Description:                      ┌ Type of Action ─────────────────────┐ ║
║ [Virus Scan Hard Disk           ] │                                     │ ║
║                                   │ () Run Program ( ) Display Message │ ║
║ Command to Run:                   └─────────────────────────────────────┘ ║
║                                                                           ║
║ [c:\vnpro\vn /hard /report=f:\vnpro\virus.rpt /append                   ] ║
║                                                                           ║
║ ┌ Schedule ─────────────────────────────────────────────────────────────┐ ║
║ │                                                                       │ ║
║ │ Frequency: [One Time    ]                                            │ ║
║ │                                                                       │ ║
║ │ () Time:  [08 ]:[30 ]                     Date:  [27 ]               │ ║
║ │                                                                       │ ║
║ │ ( ) TimeLess                               Month: [March       ]     │ ║
║ │                                                                       │ ║
║ │ [X] Run if scheduled time missed           Year:  [1994 ]             │ ║
║ └───────────────────────────────────────────────────────────────────────┘ ║
║ ┌────────┐  ┌────────┐  ┌────────┐  ┌────────┐                            ║
║ │   OK   │  │ Cancel │  │Options │  │ Browse │                            ║
║ └────────┘  └────────┘  └────────┘  └────────┘                            ║
╚═══════════════════════════════════════════════════════════════════════════╝

Description:  The title of the event

Type of Action
   Run Program: Configures the event to run a program (COM, EXE, BAT, etc.)
   Display Message: Configures the event to display a message

Command to Run:  Displayed when Type of Action is set to "Run Program", the
                 Command to Run should contain the complete command-line
                 required to run the event.
Message Text:    Displayed when Type of Action is set to "Display Message".
                 Type in the message to display when the event is activated.

Schedule
   Frequency:  Choose between One Time, Always, Hourly, Daily,
               Weekdays (Mon-Fri), Weekly, and Monthly.  All frequencies
               except One Time are repetitive.
     One Time: Select the Time, Date and Month the event will run.  After
               the event is run, it will be removed from the list.
     Always  : An event marked to run Always will run once each time the
               Scheduler is run.  Always events will run before any other
               events scheduled to run.
     Hourly  : Run the event at the specified minutes past each hour.   
     Daily   : Run the event at the specified time each day.
     Weekdays: Run the event at the specified time each Monday through Friday.
     Weekly  : Run the event on the specified day at the specified time
               each week.
     Monthly : Run the event at the specified time on the same numeric day
               each month.

   Time: Select the hour and minute to run the event (24 hour clock).
   Timeless: Launches the event on the specified day as soon as the
             scheduler is run.  For example, to perform a virus scan each
             day when a workstation is booted, select Timeless.

   Run if scheduled time missed: Select this option to run the event even
             if the scheduled time is missed.  If this box is not selected,
             the Scheduler will not run any scheduled events which were
             missed by more than one minute.

┌───────┐ 
│Options│ Access the Event Option Window
└───────┘ 
┌───────┐
│Browse │ Displays the File Window, which provides easy selection of the
└───────┘ Command to Run
.TOPIC:
Event Option Window
The Event Option Window allows you to perform additional actions if the
scheduled event returns certain Errorlevel codes.  The Window style
to use when the event is run can also be defined.

╔╣■├─────────────────────── Options ───────────────────────────╠╗
║                                                               ║
║ ┌Run this Event from:───────────────────────────────────────┐ ║
║ │ [X] DOS Scheduler [X] Windows Scheduler [X] Network Login │ ║
║ └───────────────────────────────────────────────────────────┘ ║
║                                                               ║
║ [X] If this event returns Errorlevel: [3   ]                  ║
║       [ ] Mark the event as completed                         ║
║       Run: [f:\login\lansd\logout.bat                      ]  ║
║ ────────────────────────────────────────────────────────────  ║
║ [ ] If this event returns Errorlevel: [0   ]                  ║
║       [ ] Mark the event as completed                         ║
║       Run: [                                               ]  ║
║ ────────────────────────────────────────────────────────────  ║
║ [ ] If this event returns Errorlevel: [0   ]                  ║
║       [ ] Mark the event as completed                         ║
║       Run: [                                               ]  ║
║ ────────────────────────────────────────────────────────────  ║
║                                                               ║
║  Run Style: [Normal        ] (MS-Windows Only)               ║
║                                                               ║
║ ┌────────┐ ┌─────────┐ ┌─────────┐                            ║
║ │   OK   │ │ Cancel  │ │ Browse  │                            ║
║ └────────┘ └─────────┘ └─────────┘                            ║
╚═══════════════════════════════════════════════════════════════╝

Place a check mark between the [ ]'s to activate an Errorlevel choice.
Then type the number of the Errorlevel to monitor.  If that Errorlevel
is returned by the event, the command defined by the Run: [  ] choice
will be launched.

Run this Event from:
     DOS Scheduler - Select this to run the event from SCHEDDOS.EXE.
     Windows Scheduler - Select this to run the event from SCHEDWIN.EXE.
     Network Login Script - Select this to run the event from LANAGENT.EXE.

[ ] Mark the event as completed:  Select this option if you still want
        the event to be treated as completed, even though the selected
        Errorlevel was returned.  Leave this choice blank if you want
        the scheduled event to be performed again if the Errorlevel is
        returned.

   Example:  The scheduler is run when the workstation logs into the network.
        If a virus is detected during a weekly virus scan, a LOGOUT batch
        file will be run to send an alert message to the network administrator
        and log the workstation off the network.  Instead of allowing the
        workstation to log into the network again and not be scanned until
        the following week, by leaving this "Completed" choice unmarked, the
        virus scan event will be launched the next time the workstation logs
        into the network. As long as a virus is found on the workstation,
        the LOGOUT.BAT file will be run.  When the workstation is virus free,
        the virus scanner will not return the virus Errorlevel, and the
        workstation will be allowed to log into the network.

Run: [    ] Type in the command-line that should be run when the Errorlevel
            is returned.

Run Style:  In Microsoft Windows, programs can be run in Normal, Minimized,
            or Maximized windows.  Select the window type to use when the
            Scheduled Event is run. 
.TOPIC:
File Window
Select the file to run by selecting the required drive, directory
and file name.  Move among the various controls by pressing the Tab
key or clicking with the mouse.  Once the file to run is displayed
between the [ ]'s below the File Name: label, select the OK button.

╔╣■├────────────── File Selection ─────────────────╠╗
║                                                   ║
║  File Name:            Directories:               ║
║  [VN.EXE           ]   F:\LANSD                   ║
║  ┌─────────────────┐   ┌───────────────────────┐  ║
║  │ LANAGENT.EXE       │ F:\                     ║
║  │ LANSD.EXE           │  LANSD                   ║
║  │ SCHEDDOS.EXE    ░   │                       ░  ║
║  │ VN.EXE          ░   │                       ░  ║
║  │ VNPRO.EXE       ░   │                       ░  ║
║  │                    │                         ║
║  └─────────────────┘   └───────────────────────┘  ║
║                        Drives:                    ║
║                        [F: [\\DTK\SYS]        ]  ║
║  ┌────────┐ ┌────────┐                            ║
║  │   OK   │ │ Cancel │                            ║
║  └────────┘ └────────┘                            ║
╚═══════════════════════════════════════════════════╝

For help selecting dialog choices, select one of the following topics by
highlighting it with the Tab key or clicking on it with the mouse.

Using Dialog Boxes
Keystroke Help

.TOPIC:
Setup Window
The Setup Window allows you to manage program-wide options.

╔╣■├────────────── Scheduler Setup ─────────────────╠╗
║                                                    ║
║  [ ] Run Scheduler during computer startup         ║
║                                                    ║
║  [ ] Write completed events to the Event Log       ║
║                                                    ║
║ ┌────────┐ ┌────────┐ ┌────────┐ ┌─────────┐       ║
║ │   OK   │ │ Cancel │ │Password│ │View Log │       ║
║ └────────┘ └────────┘ └────────┘ └─────────┘       ║
╚════════════════════════════════════════════════════╝

[ ] Run Scheduler during computer startup - Select this choice to run the
      scheduler when the computer boots.  The command SCHEDDOS /RUN will
      be added to the workstation's C:\AUTOEXEC.BAT file. During bootup,
      any scheduled events will be run.
      Note: The Scheduler is not a TSR, and returns all memory to the
            system after the scheduled event is run.

[ ] Write completed events to the Event Log - Select this option to write
      a log file of each completed event.  The Date, Time, Description
      and Errorlevel of the event is written to the log file.  The
      Log File Viewer is used to view the Scheduler Log.

┌─────────┐
│Password │ Selects the New Password Window to secure the scheduler
└─────────┘
┌─────────┐
│View Log │ Selects the Log File Viewer to view the Scheduler Log.
└─────────┘
.TOPIC:
Log File Viewer
The Log File Viewer is accessed from the Scheduler Setup window.
It displays the date, time and description of events that have been
performed.  If the event is a program, the Errorlevel may also be
recorded in the log file.

╔╣■├────────────────────── Log File Viewer ──────────────────────────╠╗
║ ┌─────────────────────────────────────────────────────────────────┐ ║
║ │03-21-94   08:30:00             Run: Virus Scan Hard Disk         ║
║ │03-22-94   17:45:00             Run: Backup Hard Disk              ║
║ │03-24-94   02:30:00   Err: 1    Run: Unattended Modem Transfer   ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                 ░ ║
║ │                                                                  ║
║ └─────────────────────────────────────────────────────────────────┘ ║
║ ┌────────┐ ┌────────┐                                               ║
║ │   OK   │ │ Delete │                                               ║
║ └────────┘ └────────┘                                               ║
╚═════════════════════════════════════════════════════════════════════╝

┌────────┐
│ Delete │ Select this button to delete the log file.
└────────┘

.TOPIC:
Password Protected Area

A password is required to access this area.  Please type it
exactly as it was originally entered.  Lowercase letters
will automatically be converted to uppercase.

If you need assistance, please contact your supervisor.

.TOPIC:
New Password Window

A Password can be set to prevent access to the various features.

If you are supplying a new password, you will be asked to verify
the password by typing it a second time.  Type the password exactly
the same as you typed it the first time.

Note:  Once the password is entered correctly, you will not need
	   to enter the password during this session.

To delete a password, leave the password empty when prompted to
change the password.

.TOPIC:
Using Help

Selecting a Help link:
----------------------
With a mouse - click on phrases outlined by two triangles.
With the keyboard - Press TAB or Shift-TAB to select a link.
   Press ENTER to jump to that topic.

Scrolling the Help window:
--------------------------
With a mouse - click on the horizontal or vertical scroll
   bars.
With the keyboard - press the cursor navigation keys.

Closing the Help window:
------------------------
With a mouse - double click on the window's control box icon.
With the keyboard - press Ctrl-F4.

Command Buttons:
----------------
Applications may use one or more of the following command
buttons.  Use a mouse to click a button or press the letter
mentioned below.

Contents - displays a table of contents for the application's
   Help.  Press C to select Contents.

Search -  opens a dialog box that lists all available Help
   topics.  Select a topic from the list box and press ENTER.
   Press S to select Search.

Back - jumps to the last Help topic viewed. Press B to select
	Back.

History - lists the last 20 Help topics viewed.  Jump to a
	topic by selecting from the list box and pressing ENTER.
	Press T to select History.

.TOPIC:
Keystroke Help
───────────────────────────────────────────────────────────────
 Character left                               Left Arrow
 Character right                              Right Arrow
 Word left                                    Ctrl+Left Arrow
 Word right                                   Ctrl+Right Arrow
 Line up                                      Up Arrow
 Line down                                    Down Arrow
 Page up                                      PgUp
 Page down                                    PgDn
───────────────────────────────────────────────────────────────
 Beginning of current line                    Home
 End of line                                  End
───────────────────────────────────────────────────────────────
 Top of file                                  Ctrl+Home
 Bottom of file                               Ctrl+End
───────────────────────────────────────────────────────────────
 Delete one character to left of the cursor   Backspace
 Delete one character at the cursor           Del
 Delete selected text                         Del

.TOPIC:
Using Dialog Boxes

 Dialog box action    With a mouse...              With a keyboard...
 ═════════════════    ═════════════════════════    ═════════════════════════
 Select a text box    Move the mouse pointer to    Press Tab until the
 for input.           the text box, then press     cursor is in the text
                      and release ("click") the    box.
                      mouse button.

 Choose an item       Double-click the item.       Highlight the item by
 from a list box.                                  pressing the direction
												   keys, then press Enter.

 Choose an option.    Click the option.            Move to an option with
												   the direction keys.

 Turn a check box     Click the check box.         Use Tab to move the
 on or off.                                        cursor to the check box,
												   then press the Spacebar.

 Choose a command     Click the command button.    Use Tab to move the
 button.                                           cursor to the command
												   button, then press Enter.

