CAP2          Version 1.50                           1995.07.14  

What is CAP2 ?

     CAP2 is a Windows 3.x utility which allows you to 
     capture your print to a queue on a Netware server.
     You can change queue by klick on the new queue.
     You can only print to a queue that has the right printer.
     So you cannot print with the wrong driver.

What files should I have?

     The distribution .zip file contains the following files:

        readme.txt      this file
        cap2.exe        executable file
        printere.fih    file with a sample printer definitions

     You also need
        VBRUN200.DLL    not included, you can find it on most BBS
        NWNETAPI.DLL    from Novell Netware, usually installed in
                        \WINDOWS or in \WINDOWS\SYSTEM.
        NWCALLS.DLL     from Novell Netware, same place as NWNETAPI.DLL

Installation:
     Installation is simple!
     Place CAP2 in any place on the server or on your local disk.
     Add CAP2 to windows program manager.
     
     Lets say you placed CAP2 in PUBLIC.

     klick on:
         File
         New program
	 command line: Z:\PUBLIC\CAP2 [config file]

     Use an editor to edit Z:\PUBLIC\PRINTER.FIH to suite your needs.
     
     You can also set an dos environment variable called CAP2 to the path
     of the config file. Like this in autoexec.bat

     SET CAP2=Z:\PUBLIC\PRINTER.FIH

     Config file priority:
        1. command line in icon
        2. dos env. CAP2
        3. S:\prog\fih\printere.fih

How do I use lpt4-9 ?
     Use a editor to edit your win.ini file.
     in the [Ports] section add 
        LPT4:=
        LPT5:=
        LPT6:=
        LPT7:=
        LPT8:=
        LPT9:=
     and in NET.CFG add this line to Netware DOS Requester section
        network printers = 9
     reboot your computer
     (lpt4-9 works only in windows, dos can only use lpt1-3)

New to version 2.50:
     Can place print into User HOLD.
     When a queue is not found on default server, try to find it on 
     a nother server, as specified in SERVERS= line.
     Now CAP2 also uses NWCalls.dll for some functions.

Disclimer:
     CAP2 is distributed as "as it is".
     It is tested on a Novell Netware 3.12, 4.10 (BINDERY EMUL) and on
     Portable Netware 1.11e using VLM version 1.20. 

Registration:
     CAP2 is not free software!  You are granted a limited 
     license to try out CAP2 for 30 days to see if it suits 
     your needs. After 30 days you must either remove this 
     software from your computer or send in a registration fee 
     of $10 to the author.



     Please forward any comments to the address(es) below

     Snail      Bengt Bolinder
                Platanhaven 6
                DK-2600 Glostrup

     E-mail     bbo@fih.dk