Number: A2TH071990U175 Subject: NetWare 386 v3.0 and v3.1 - Two Token-Ring LANs Date: August 1, 1990 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - PROBLEM: Here is some information that we found with NetWare 386 v3.0 and v3.1 and loading two Token-Ring cards. With v3.0, customers may get this error message: "Token-Ring adapter did not exist at port A24". Solution: The answer is in the setting of the 16/4 cards. The option of setting the first card to option 0 and the second card to option 2 will fail. The setting we found that worked was as follows: Lan A:IRQ=2 ROM=CC00 and this sets RAM at D800 switch #9 set to off (this selects the primary card) Lan B:IRQ=3 ROM=C800 and this sets ram at D400 switch #9 set to on (alternate) There may be other combinations that will work which we didn't test. When loading two Token-Ring cards with v3.1, customers may get this error message: "ERROR: frame type is already loaded" This occurs when you enter LOAD TOKEN then another LOAD TOKEN. The correct statement is LOAD TOKEN PORT=A20 then LOAD TOKEN PORT=A24. The first port assignment is assumed but the second must be specified. (X) This information was verified verbally. (X) This information was verified in the lab.