version	equ	2

	include	defs.asm

;Ported from Tim Krauskopf's micnet.asm, an assembly language
;driver for the MICOM-Interlan NI5210, by Russell Nelson.  Any bugs
;are due to Russell Nelson.
;Updated to version 1.08 Feb. 17, 1989 by Russell Nelson.
;Updated to support 1500 byte MTU April 27, 1989 By Brad Clements.

;  Copyright, 1988, 1989, Russell Nelson

;   This program is free software; you can redistribute it and/or modify
;   it under the terms of the GNU General Public License as published by
;   the Free Software Foundation, version 1.
;
;   This program is distributed in the hope that it will be useful,
;   but WITHOUT ANY WARRANTY; without even the implied warranty of
;   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;   GNU General Public License for more details.
;
;   You should have received a copy of the GNU General Public License
;   along with this program; if not, write to the Free Software
;   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

code	segment	word public
	assume	cs:code, ds:code

;
;  Equates for controlling the MICOM board
;
;  I/O addresses, writing anything in AL trips these gates
;
;  First six addresses are the EPROM board Ether address (read)
;
IORESET	EQU	0			; reset the board
IOCA	EQU	1			; execute command which is in SCB
IODIS	EQU	2			; disable network connect
IOENA	EQU	3			; enable network
IOINTON	EQU	4			; enable interrupts
IOINTOF	EQU	5			; disable interrupts, '586 thinks it still ints

BASE_OFFSET	equ	0
GET_ADDR_INC	equ	1

;
;  Data segment
;

	public	int_no
int_no		db	2,0,0,0		; interrupt number. 
io_addr		dw	0360h,0		; I/O address for card (jumpers)
base_addr	dw  	0d000h,0	; base segment for board (jumper set)

	public	driver_class, driver_type, driver_name, driver_function, parameter_list
driver_class	db	1		;from the packet spec
driver_type	db	11		;from the packet spec
driver_name	db	"NI5210",0	;name of the driver.
driver_function	db	2
parameter_list	label	byte
	db	1	;major rev of packet driver
	db	9	;minor rev of packet driver
	db	14	;length of parameter list
	db	EADDR_LEN	;length of MAC-layer address
	dw	GIANT	;MTU, including MAC headers
	dw	MAX_MULTICAST * EADDR_LEN	;buffer size of multicast addrs
	dw	0	;(# of back-to-back MTU rcvs) - 1
	dw	0	;(# of successive xmits) - 1
int_num	dw	0	;Interrupt # to hook for post-EOI
			;processing, 0 == none,

lbca:
doca:
;we may be called from places in which ds is unknown.
	assume	ds:nothing
	loadport
	setport	IOCA
	out	dx,al			; send it
	ret
	assume	ds:code
;yet, we really should assume ds==code for the rest of this stuff.

;
; Here we include the code that is common between 82586 implementations.
; Everything above this is resident.
	include	82586.asm
; Everything below this is discarded upon installation.

	public	usage_msg
usage_msg	db	"usage: ni5210 [-n] [-d] [-w] <packet_int_no> <int_no> <io_addr> <base_addr>",CR,LF,'$'

	public	copyright_msg
copyright_msg	db	"Packet driver for the MICOM-Interlan NI5210, version ",'0'+majver,".",'0'+version,".",'0'+i82586_version,CR,LF
		db	"Portions Copyright 1988 The Board of Trustees of the University of Illinois",CR,LF,'$'

check_board:
	mov	SCP,1
	mov	dx,io_addr	; i/o address
	add	dx,EADDR_LEN	; look past the ethernet address.
	in	al,dx
	mov	bl,al		; assemble pattern to check
	inc	dx
	in	al,dx
	mov	bh,al
	cmp	bx,05500h		; pattern known to be there in ROM
	jz	have_5210_io
	pop	dx			;drop our return address
	mov	dx,offset no_5210_io_msg
	jmp	error
have_5210_io:

	mov	ax,base_addr
	mov	cx,2000h		;test only what we are going to use.
	call	memory_test
	jz	have_5210_mem
	pop	dx			;drop our return address
	mov	dx,offset no_5210_mem_msg
	jmp	error
have_5210_mem:
	ret


no_5210_io_msg	db	"No 5210 found at that I/O address.",CR,LF,'$'
no_5210_mem_msg	db	"No 5210 found at that memory address.",CR,LF,'$'

	include	memtest.asm

code	ends

	end