3Com Corporation EtherDisk Diskette for the EtherLink II Adapter Family The EtherDisk diskette provides you with the necessary software, utilities, and documentation to use 3Com's EtherLink II family of adapters with various network operating systems (NOSs). The diskette also includes the diagnostic program and additional files containing user information. The adapter guide comes packaged with the adapter and gives important information on adapter installation and use. The adapter guide should be used in conjunction with the EtherDisk diskette. NOTE: Unless otherwise indicated, the term "EtherLink II adapter" refers to the EtherLink II (3C503), the EtherLink II TP (3C503-TP), the EtherLink II/16 (3C503-16), and the EtherLink II/16 TP (3C503-16-TP) adapters. All of these adapters must be selected as an EtherLink II adapter in your setup program (for example Novell's WSGEN) during the installation procedure. Before you install the network drivers, follow the procedures in your adapter guide to: - install your adapter - run the diagnostic program - connect to the network To run the diagnostic program and to update the network drivers, use the Menu Program on the EtherDisk diskette. To access the program, type MENU at the prompt. Refer to the adapter guide or the release note for the EtherDisk diskette v2.0 for more information. (%VER Readme.txt v2.0b)