Release Notes
                                 
CD-View V2.02c Demo Copy (7 days)

These Release Notes accompany CD-View Version 2.02c Demo Copy. This
document should be read by the system administrator.

This 7 day demo copy of CD-View V2.02c is provided for demo
purposes only. By installing it, you agree to accept the terms and
conditions of the software license agreement provided in the guide.

Demo Copy Restrictions

This demo copy allows you to test the capabilities of the product.
As such, the following limitations apply:

ú    Demo software will only work for 7 days after installation. No
     registration information is required during product installation.
ú    Only 2 users are supported.
ú    Only 3 volumes are supported.
     Note: As one of the volumes is the default volume SYS:, a
     maximum of 2 CD-ROMs can be supported.

OCDX (Ornetix CD-ROM Extensions) Driver

The full release of CD-View contains the OCDX driver. OCDX was
developed to overcome the following problems:

ú    Some old applications require Microsoft CD-ROM Extensions
     (MSCDEX) loaded in order to be able to run. These applications use
     some of MSCDEX's APIs. MSCDEX will not load on a workstation which
     does not have a CD-ROM device driver (and CD-ROM drive) connected
     to it. In addition, when MSCDEX loads, it allocates a large memory
     buffer for its use. All of this is not required when using OCDX.

ú    Other types of applications access the CD-ROM device driver
     directly for either performance or security reasons. OCDX emulates
     the major functionality of a CD-ROM device driver.

When loaded, OCDX uses about 2KB of memory and emulates the major
functionality of both MSCDEX and a CD-ROM device driver.

Upgrading from Demo Copy

When upgrading from the Demo copy to the full release, select the
"Upgrade to New Version" option. This allows you to save bindery
and setup information used with the Demo Copy.

Enhancements to Setup utility (not mentioned in the manual)

Registration Information Window
ú    The security mechanism has been modified. The Registration
     Information window appears at the beginning of the installation
     procedure and not at the end. Use the security information printed
     on the inside cover of the CD-View User's Manual.

Parameter Information Window
ú    External Network Number:
     Defines the segment number on which the CD-View server resides.
     Ensure that this number is the correct segment number used by other
     servers and routers on the same segment. If NETX or VLM is loaded,
     the setup program automatically determines the segment number which
     is used as the default value.
     When CD-View loads, if NETX or VLM is loaded, it attempts to find
     the external segment number and compare it with the number
     specified. If they are different, a warning message is displayed
     and CD-View runs using the correct network number. If neither NETX
     nor VLM is loaded, the number provided will always be used. In this
     case, if the number provided is wrong,  CD-View will be using a
     wrong network number and will not be accessible.
ú    Internal Network Number:
     Defines the internal network number to be used by CD-View. Ensure
     that this number is not used by any other server on the whole
     network.  The default value is determined from the ethernet address
     on the Network Interface Card.
     If you specify a number which is used by another server, routing
     warning information will be displayed on your NetWare server's
     console, identifying the problematic network address.

Advanced Setup Window
ú    Filter SAP Packets:
     A SAP filtering option has been added to the Advanced Setup
     window. This option allows restriction of SAP dynamic objects
     which are added to the bindery during operation.
     Following are possible options for this field:

    Disable Filtering   All servers are added to the bindery.
    Accept File         Add only advertising file servers to the
    Servers only        bindery. (DEFAULT)
    Filter All Servers  Don't add to the bindery any objects
                        received via SAP.

    The default of "Accept File Servers Only" should be used when
    users do not directly login to the CD-View server. If direct
    login is required, this field should be set to "Disable
    Filtering".  For more information on direct logins, refer to the
    CD-View Guide.

Volume Information
    Up to 25 volumes (SYS: volume plus 24 CD-ROM volumes) can now be
    displayed in the Volume Information window.

ú    The first defined volume (SYS:) can now be set to read/write.

Additional Notes

ú    If CD-View is logged into a NetWare server, you should issue
     the CASTOFF ALL command prior to loading CD-View. This will prevent
     messages from file server consoles and workstations being displayed
     on your workstation and interrupting CD-View.