                    CHOOSING YOUR SCREEN COLORS in PC-TYPE+

    If you have a color monitor and would like to change the colors of
    PC-TYPE+ to something different than those selected for your
    distribution disk, you can do this by going to the MODIFY DEFAULTS
    panel by pressing F8 and then F2.  Once in the MODIFY DEFAULTS panel,
    move the Option Selection Bar by pressing the Tab key (or the Shift
    Tab key to move in the opposite direction) until it is on the field
    Screen Attributes.  Then Press F10 and you will be presented with the
    screen displayed below.

    If you use a monochrome screen, don't worry about the colors.  The
    attributes are automatically changed in PC-TYPE+ when it recognizes
    that you are using a monochrome screen.

    If you use a graphics card with a non-color monitor, you should
    probably change these attributes so your screen will be legible.

                              Press the PgDn Key

 SCREEN ATTRIBUTE DEFINITION
                                       █████████████████████
               Screen Attribute  17    ██╔═════╡███╞═════╗██
               Menu Attribute    60    ██║         ╔════╗║██
               Field Attribute   47    ██║         ║    ║║██
               Border Attribute  09    ██║ Hi-     ║Menu║║██
                                     ██║ Lite    ║    ║║██
                   Background────┘│    ██║         ╚════╝║██
                   Foreground─────┘    ██║    Text Area  ║██
                                       ██║Command Line   ║██
                                       ██║ Message Line  ║██
                                       ██╙L···^····1····R╜██
                                       █████████████████████

         Note: Only the Foreground has any effect on the Border.
               Press AltF or CtrlF to change Foreground Definition
               Press AltB or CtrlB to change Background Definition

                              Press the PgDn Key

                                SCREEN COLORS

    You may set colors on four different areas of the screen:
          - the text area in which you are now looking
          - the border outside the double line at the margins
          - the fields color, like the Command Line below
          - the small menus color which you would see if you pressed F8.

    To change the colors, you move the Color Selection Bar to the field
    you want to modify (Screen Attribute, Menu Attribute, etc.) by
    pressing the Tab key, and then press AltF or CtrlF to change the
    foreground color and AltB or CtrlB to change the background color.
    The results of these color changes will be seen on the small screen in
    the panel as you make the changes.  (The numbers mainly help you
    remember a particular combination you liked.)  AltF and AltB change
    these numbers in one direction while CtrlF and CtrlB change the
    numbers in the opposite direction.

                              Press the PgDn Key


                                SCREEN COLORS

    When you are satisfied with what you have, press F10, and the colors
    of PC-TYPE+ will change instantly to your new selection.  If you
    decide you really didn't want to change the colors after all, you
    could press the Esc key INSTEAD of F10 and your changes will be
    ignored.



    If you like your selections and want to make them permanent, you may
    do so by saving your defaults to a file or to PC-TYPE+ itself.  (See
    HELP file DFLTS_SV).




                     Press F4 to Return to the HELP Menu

