                   Renegade Frequently Asked Question List
                     Created by - Paul Reed (85:823/207)
                               Created 09/04/92
                            Last Revised 03/22/93

Q. What is the Latest version of Renegade Available?

A. The latest version of Renegade released to the public is
   Renegade 03-05Beta.

Q. How come in the newest version of Renegade all my Menu prompts have
   these HEART shaped ASCII characters within them..

A. as of version 2-27 Beta's release the Ascii-3 (or Heart) coloring
   system has been COMPLETELY removed.. you should obtain the file
   CLRFIX.ZIP or ARJ whatever the case may be. and follow the directions
   included.. for those of you who have an aversion to reading DOCS
   i will include the steps to take to run it successfuly on your system
   place clrfix.exe into your main BBS directory. the DATE on Clrfix.exe
   should be 2-1-93 at 00:26am or it is too old of a version and will
   not convert all the DATA files that need to be converted.. do NOT
   run clrfix on the data files by passing *.dat to clrfix.. you WILL
   destroy your data files if you do this..

   at the dos prompt type CLRFIX and press Enter which is NOT the long
   key at the bottom of the keyboard <GRIN!!> couldn't resist Cott.
   you will see it process several different .DAT files.. then when it
   is done  type CLRFIX MENU\*.MNU to convert your menus.. then use
   CLRFIX MISC\*.ASC to convert your ascii text files..

Q. Why does the built in .QWK door give all of my bases a base number of
   0 and then put all the messages into all the bases in the reader?

A. With the release of version 2-27 Beta the message bases now have a
   permanent Index Number used for .QWK packets.. you should run the
   program PERMINDX.EXE contained in the distribution archives for
   RG 2-27Beta and Later.. RUN THIS ONLY ONCE.. when you run it it
   will ask you for the path to MBASES.DAT which is located in your
   DATA directory..

Q. What the hell happened to all the Header colors?? its all grey on
   black!!!

A. With the release of RG 2-27 Beta a New color configuration System was
   implemented.. you should go into the color configuration setup (K)
   from the System Configuration menu and configure a default color
   system..

Q. Why won't Renegade respond to my modem, or why wont it even load up?

A. All versions of renegade require a fossil driver to operate at ALL
   Renegade WILL however load up without a fossil driver installed if
   the -L option is used on the commandline.. the 2 most popular FOSSIL
   drivers out are BNU and X00.. most boards should have these available
   it is beyond the scope of this manual to explain how to set up a
   FOSSIL driver.

Q. Where are the DOCS!?!?!?!?

A. Currently Theo Van Dinter has released a doc file for Renegade..
   However.. these Docs have not been Sanctioned by Cott Lang at least
   that i am aware of anyways..but should serve to get you through until
   a release approved by Cott Lang.

Q. Why are there so many bugs.. stuff never seems to work right!!

A. Renegade is still in Beta form.. this means that it is NOT a standard
   release.. at this point in time everyone that sets up a renegade BBS
   is in effect a Beta tester.. or bug hunter if you will.. as such BETA
   releases have bugs.. it is one of the drawbacks of getting new versions
   at least once a month..

Q. How do i become a BETA site?

A. if you are running the software technically you already are.. currently
   though there is NO official Beta site structure.. although Cott Lang
   has stated that once a standard release is made he may go to a Beta
   testing structure.. at this point in time it does not even pay to ask
   as the answer will always be NO.

Q. How the HELL do i make the PCR system work... its really confusing..

A. first you have to go into System config and set up the PCR system
   as to what security levels are going to have one and how many
   messages each user has to post to meet the PCR.

   Next any command that you want to be restricted based on the PCR you
   would insert a ZZ somewhere in the ACS field for that command..

   conversely you can set up a linked command (see the docs on how to do
   that) with an acs of !ZZ to display a file or message to the user
   saying their PCR is out of balance... its really quite simple but it
   really is one of the most confusing things to set up it seems...

Q. How come SOME people have copies labeled ALPHA if there are no Alpha
   Sites?

A. About the easiest way to answer this questions is that the Alpha
   versions seem to be distributed to people who make clear and concise
   bug reports about the software.. also it seems to be released to the
   utility authors so they can get a head start on converting a old
   utility to match the new structures of renegade if needed and to test
   them before releasing them so they can be released at nearly the same
   time as the next Beta.

Q. When will the Standard Release of Renegade be made?

A. When its made.. all indications are that it won't be too much longer

Q. How much does Renegade cost to Register it?

A. Currently there is no registration fee asociated with renegade..
   At some point when the Standard release is made a registration fee
   may be required.. Cott hasn't quite made up his mind on how much he
   is planing on charging for registration.. Or even if a fee will be
   charged at all.

Q. How do i set up HSLINK/BI-MODEM with Renegade?

A. At this point in time Renegade has built in bi-directional protocol
   support.. but only HS-LINK is supported at this time.. Bi-Modem is
   NOT recommnded as there are some potential security risks to someone
   holding a registered copy.. HSLINK can best be configured by grabbing
   PROTOCOL.ZIP off of Cott Lang's or any other Renegade Support board
   that has it.. this is a copy of Cott Langs own protocol.dat file
   with most of the popular protocols installed including HSLINK..
   Cott has suggested that the best way to configure HSLINK itself is
   NOT to configure it.. just straight out of the BOX should work
   for most people...

Q. How do i set up Renegade multi-node??

A. this probably has to be the MOST asked question in renegade's history.
   and in actuality it is probably one of the easiest things to set up.
   Basically if you have desqview, windows, OS/2 or any other program
   that allows 2 programs to be run simultaneously you can run MULTI-NODE
   this document will explain how to setup one dial up node and one
   local only node... from there you should be able to set up as many

---------------------------------------------------------------------------

Here are the settings i use for Renegade with Desview running a 3 node
system with front door on node 1.. i am only going to post the frodo
node 1 and renegade node 2 entries.. as the node 3 is completely identical
to the node 2 settings i will also post the batch files i use for both..

If you are using DESQview.. TURN MANAGE PRINTER CONTENTION OFF or you
will not be able to load more than one node....

                               Change a Program

 Program Name............: Renegade Node 1

 Keys to Use on Open Menu: R1                         Memory Size (in K): 200

 Program...: runfd.bat

 Parameters:

 Directory.: c:\fd

 Options:
                  Writes text directly to screen.......: [Y]
                  Displays graphics information........: [N]
                  Virtualize text/graphics (Y,N,T).....: [Y]
                  Uses serial ports (Y,N,1,2)..........: [N]
                  Requires floppy diskette.............: [N]


                      Change a Program Advanced Options

 System Memory (in K).......:   0   Maximum Program Memory Size (in K)..: 600

 Script Buffer Size.......:  1000   Maximum Expanded Memory Size (in K): 1000

 Text Pages: 1  Graphics Pages: 0   Initial Mode:        Interrupts: 00 to FF

 Window Position:
    Maximum Height:  25       Starting Height:           Starting Row...:
    Maximum Width.:  80       Starting Width.:           Starting Column:

                                Shared Program
 Pathname..:
 Data......:

 Close on exit (Y,N,blank)......: [N]  Uses its own colors..............: [Y]
 Allow Close Window command.....: [Y]  Runs in background (Y,N,blank)...: [Y]
 Uses math coprocessor..........: [N]  Keyboard conflict (0-F)..........: [0]
 Share CPU when foreground......: [Y]  Share EGA when foreground/zoomed.: [Y]
 Can be swapped out (Y,N,blank).: [N]  Protection level (0-3)...........: [0]



                               Change a Program

 Program Name............: Renegade Node 2

 Keys to Use on Open Menu: R2                         Memory Size (in K): 200

 Program...: node2.bat

 Parameters:

 Directory.: c:\renegade

 Options:
                  Writes text directly to screen.......: [Y]
                  Displays graphics information........: [N]
                  Virtualize text/graphics (Y,N,T).....: [Y]
                  Uses serial ports (Y,N,1,2)..........: [N]
                  Requires floppy diskette.............: [N]


                      Change a Program Advanced Options

 System Memory (in K).......:   0   Maximum Program Memory Size (in K)..: 600

 Script Buffer Size.......:  1000   Maximum Expanded Memory Size (in K): 1000

 Text Pages: 1  Graphics Pages: 0   Initial Mode:        Interrupts: 00 to FF

 Window Position:
    Maximum Height:  25       Starting Height:           Starting Row...:
    Maximum Width.:  80       Starting Width.:           Starting Column:

                                Shared Program
 Pathname..:
 Data......:

 Close on exit (Y,N,blank)......: [N]  Uses its own colors..............: [Y]
 Allow Close Window command.....: [Y]  Runs in background (Y,N,blank)...: [Y]
 Uses math coprocessor..........: [N]  Keyboard conflict (0-F)..........: [0]
 Share CPU when foreground......: [Y]  Share EGA when foreground/zoomed.: [Y]
 Can be swapped out (Y,N,blank).: [N]  Protection level (0-3)...........: [0]


and now my batch files for frodo and for renegade node 2

this is the RUNFD.BAT that the node1 window calls...

cd\dv
device c:\zansi.sys
:START
cd\fd
fd
if errorlevel 150 goto WEEKLY
if errorlevel 100 goto UNPACK
if errorlevel 90 goto NIGHT
if errorlevel 85 goto HS
if errorlevel 80 goto FAST
if errorlevel 70 goto MEDIUM
if errorlevel 60 goto SLOW
if errorlevel 40 goto LOGON
if errorlevel 10 goto QUIT
if errorlevel 5 goto START

:HS
cd\renegade
renegade -N1 -B9600 -Q
if errorlevel 2 goto scan
goto START

:FAST
CD\RENEGADE
RENEGADE -B2400 -N1 -Q
if errorlevel 2 goto scan
GOTO START

:MEDIUM
CD\RENEGADE
RENEGADE -B1200 -N1 -Q
GOTO START

:SLOW
CD\RENEGADE
RENEGADE -B300 -N1 -Q
GOTO START

:LOGON
CD\RENEGADE
RENEGADE -N1 -L
GOTO START

:UNPACK
IF EXIST C:\FD\FILES\*.TIC GOTO TICK
IF EXIST C:\FD\FILES\*.MO* GOTO TOSS
IF EXIST C:\FD\FILES\*.TU* GOTO TOSS
IF EXIST C:\FD\FILES\*.WE* GOTO TOSS
IF EXIST C:\FD\FILES\*.TH* GOTO TOSS
IF EXIST C:\FD\FILES\*.FR* GOTO TOSS
