                    SatisFAXtion/400 Update Information

    This archive contains the latest version of firmware for the
    SatisFAXtion Modem/400.  If you wish to obtain a full update,
    call Intel's FaxBACK Service at (800) 525-3019 and request
    document #0029.  The full update is also available on the Intel
    BBS, but due to OEM licensing agreements can be distributed only
    through the "Registered User Software Upgrades" menu, which is
    accessed from the Main Menu.

    The following sections describe installation procedures for this
    firmware update as well as a list of fixes and changes.  To
    determine whether you need the full update, read the section
    "WHAT'S CHANGED IN THE FULL UPDATE" below.

INSTALLATION INSTRUCTIONS
=========================

* Copy all files into your fax software directory (usually C:\FAX).
  (If you extracted the archive in your fax directory, overwriting existing
  files, then this step has already been done.)

WHAT'S CHANGED IN THE FIRMWARE UPDATE
=====================================

DOWNLOAD.400  Ver. 3.11 (items with ** are new in 3.11, items marked
                         with * were effective in 3.10):

* Enables 14.4Kbps fax receive capability.

* Fixes most problems where the board emits a clicking sound and/or no 
  dialtone is received when the downline phone is picked up.  (When
  using the "mostly voice calls" or "mostly fax calls" options.)
  
  Version 3.02 and higher fixed these problems with most phones, however, 
  there are some phones (including many Panasonic multi-feature phones) 
  which still do not get a dialtone when plugged into the SatisFAXtion board.  
  The only solution to this problem is to try using a different brand/model 
  of phone.

* Fixes problems with Smart Line Sharing where the board picks up and 
  listens for fax tone even when fax autoanswer is turned off.  This caused 
  the board to interfere with some answering machines.  The board no longer
  listens for fax tones when the fax autoanswer is turned off.

* Fixes problems with the "distinctive ring" feature of Smart Line Sharing.

* Fixes various data modem problems, including problems connecting with 
  2400bps modems.

* Fixes problems resulting in various protocol errors, including "Remote 
  unit not Group 3 compatible" and "Phone line dead or remote disconnected".

* Fixes problems with several autodialers, including ACT & Windows Cardfile.
-------
** Fixed problems with Sharp and Panasonic fax machines.

** ATI3 command now reflects correct version of DOWNLOAD.400. 

** ! dial modifier now works (hook flash)

** Fixed misc modem problems related to RI, &L2 and Robocomm.

WHAT'S CHANGED IN THE FULL UPDATE
=================================

MA.UTL  Ver 1.41

* Fixes problems with printing to postscript printers.

SETUP.EXE  Ver 1.42 

* Eliminates the need for #-tone to access the data modem when distinctive
  ring option is set for data calls on "one long" ring.

SATISFAX.SYS  Ver 1.41

* Minor internal changes and code optimization.

CASMGR.EXE  Ver. 1.42

* Fixes problem with sending Cover-only fax events to groups.

* Fixed problem where horizontal component of ASCII line-draw characters
  sometimes didn't print on sent faxes.  (Only affects ASCII textfiles &
  cover sheet text.)

* Fixes problem where 80-column lines created a line feed after each line.

FAXPOP.EXE Ver. 1.42, PRN2FAX.EXE Ver. 1.41, ASCII.OVL, EPSON.OVL, HP.OVL

* Fixes various bugs in the HP emulation for FAXPOP & PRN2FAX.  

  NOTE:  This version of the HP emulation software fixes several bugs, but
         a small number of new bugs were introduced.  In general, the 
         emulation was considered to be more robust than the previous 
         version, so it was released with this update.  The following list 
         shows what was fixed and also lists the known new bugs.  If this 
         version creates problems for your application, please run SETUP 
         from your original disks and recopy the original FAXPOP.EXE, 
         PRN2FAX.EXE, ASCII.OVL, EPSON.OVL & HP.OVL files.  This will return 
         your HP emulation software to the original 1.40 version.

         If you discover a problem in this version, please report it to Intel
         by sending a fax to the "Intel Support, USA" number in your DEFAULT
         phonebook.  Include a detailed description of the problem and attach 
         a copy of the PCL file that is generated by "printing" your document 
         to a disk file (instead of the printer).  Include the filename in the
         description file.

Fixed:

* Bold characters printed as normal in some apps.         
* Color text not printed some apps.
* Emulation process "crashes" in Display Write 5.
* Fill pattern problems in some apps.
* Border lines not printed far enough to the right.
* Fixed several problems printing in Landscape mode.

New problems:
* Some HP-GL commands are printed as graphics instead of being skipped.
  (Note:  The emulator does not support HP-GL, but normally HP-GL commands
   are skipped instead of printed.)
* Last page is printed twice in Professional Write 2.2.
* Margin alignment problems in certain DisplayWrite files.
* Minor text alignment problems in certain files.
