

		     DigiWARE Release Notes

			     for 

	      	DigiBoard User Diagnostic Package



	User Diagnostic - DIGIDIAG.EXE  Version 1.1.0
	Memory Map Utility - DIGIMMAP.EXE  Version 1.1.0
	User Diagnostic Manual - USERDIAG.TXT


		Diskette P/N 40000934B (5.25") -  V1.1.0
		Diskette P/N 40000908  (3.5")  
		Diskette P/N 40000943  (5.25")


			    7/28/93


	1. Enhancements

		- A port interrupt test was added for the PC/X* family.  This
		  test checks out the port's ability to generate an interrupt 
		  to the board's CPU.
		- The MC/Xi product family was added to the user diagnostics.
		  The user diagnostics tests the newer models with the 
		  following ADF files:  @7F99.ADF, @7F9A.ADF, and @7F9B.ADF.
		  The tests are the same as the PC/X* family.
		- The C/X host adapter family was added to the user 
		  diagnostics.  The user diagnostics test 6 host adapters.
		  There are two ISA adapters, two EISA adapters, and two
		  Micro Channel adapters (@6FE8.ADF & @6FEC.ADF).  The general
		  tests are the same as for the other families.  The port test
		  uses synchronous mode and DMA to exercise the host adapter
		  hardware.


	2. Bug Fixes

		None.


	3. Known Limitations

		This is the second release of the User Diagnostic package.
		The current release supports the following product families:
			- PC/Xe boards, PC/Xi boards, and the 2Port board for 
			  the ISA/EISA bus.  
			- MC/Xi boards.
			- C/X host adapters.

		The product does NOT support the MCd/Xi at this time.

		Refer to the user diagnostic manual (USERDIAG.TXT) for 
		further information.


	4. Manual Errata

		The User Diagnostic manual is provided on the release
		disk as a file in ASCII text format.  The manual is
		called USERDIAG.TXT.

