#ifndef _ALPHA_IRQ_H
#define _ALPHA_IRQ_H

/*
 *	linux/include/asm-sparc/irq.h
 *
 *	Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
 */

#include <linux/linkage.h>

#include <asm/system.h>     /* For NCPUS */

extern void disable_irq(unsigned int);
extern void enable_irq(unsigned int);

/* On the sun4m, just like the timers, we have both per-cpu and master
 * interrupt registers.
 */

/* These registers are used for sending/receiving irqs from/to
 * different cpu's.   
 */
struct sun4m_intreg_percpu {
	unsigned int tbt;        /* Interrupts still pending for this cpu. */

	/* These next two registers are WRITE-ONLY and are only
	 * "on bit" sensitive, "off bits" written have NO affect.
	 */
	unsigned int clear;  /* Clear this cpus irqs here. */
	unsigned int set;    /* Set this cpus irqs here. */
	unsigned char space[PAGE_SIZE - 12];
};

struct sun4m_intregs {
	struct sun4m_intreg_percpu cpu_intregs[NCPUS];
	unsigned int tbt;                /* IRQ's that are still pending. */
	unsigned int irqs;               /* Master IRQ bits. */

	/* Again, like the above, two these registers are WRITE-ONLY. */
	unsigned int clear;              /* Clear master IRQ's by setting bits here. */
	unsigned int set;                /* Set master IRQ's by setting bits here. */

	/* This register is both READ and WRITE. */
	unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
};

extern struct sun4m_intregs *sun4m_interrupts;

/* Bit field defines for the interrupt registers on various
 * Sparc machines.
 */

/* The sun4c interrupt register. */
#define SUN4C_INT_ENABLE  0x01     /* Allow interrupts. */
#define SUN4C_INT_E14     0x80     /* Enable level 14 IRQ. */
#define SUN4C_INT_E10     0x20     /* Enable level 10 IRQ. */
#define SUN4C_INT_E8      0x10     /* Enable level 8 IRQ. */
#define SUN4C_INT_E6      0x08     /* Enable level 6 IRQ. */
#define SUN4C_INT_E4      0x04     /* Enable level 4 IRQ. */
#define SUN4C_INT_E1      0x02     /* Enable level 1 IRQ. */

/* The sun4m interrupt registers.  MUST RESEARCH THESE SOME MORE XXX */
#define SUN4M_INT_ENABLE  0x80000000
#define SUN4M_INT_E14     0x00000080
#define SUN4M_INT_E10     0x00080000

#if 0 /* These aren't used on the Sparc (yet), but kept for
       * future reference, they could come in handy.
       */
#define __STR(x) #x
#define STR(x) __STR(x)
 
#define SAVE_ALL "xx"

#define SAVE_MOST "yy"

#define RESTORE_MOST "zz"

#define ACK_FIRST(mask) "aa"

#define ACK_SECOND(mask) "dummy"

#define UNBLK_FIRST(mask) "dummy"

#define UNBLK_SECOND(mask) "dummy"

#define IRQ_NAME2(nr) nr##_interrupt(void)
#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
#define FAST_IRQ_NAME(nr) IRQ_NAME2(fast_IRQ##nr)
#define BAD_IRQ_NAME(nr) IRQ_NAME2(bad_IRQ##nr)
	
#define BUILD_IRQ(chip,nr,mask) \
asmlinkage void IRQ_NAME(nr); \
asmlinkage void FAST_IRQ_NAME(nr); \
asmlinkage void BAD_IRQ_NAME(nr); \
asm code comes here
#endif

#endif