/* * linux/drivers/char/console.c * * Copyright (C) 1991, 1992 Linus Torvalds */ /* * console.c * * This module exports the console io functions: * * 'void do_keyboard_interrupt(void)' * * 'int vc_allocate(unsigned int console)' * 'int vc_cons_allocated(unsigned int console)' * 'int vc_resize(unsigned long lines, unsigned long cols)' * 'void vc_disallocate(unsigned int currcons)' * * 'long con_init(long)' * 'int con_open(struct tty_struct *tty, struct file * filp)' * 'void con_write(struct tty_struct * tty)' * 'void console_print(const char * b)' * 'void update_screen(int new_console)' * * 'void do_blank_screen(int)' * 'void do_unblank_screen(void)' * 'void poke_blanked_console(void)' * * 'unsigned short *screen_pos(int currcons, int w_offset, int viewed)' * 'void complement_pos(int currcons, int offset)' * 'void invert_screen(int currcons, int offset, int count, int shift)' * * 'void scrollback(int lines)' * 'void scrollfront(int lines)' * * 'int con_get_font(char *data)' * 'int con_set_font(char *data, int ch512)' * 'int con_adjust_height(int fontheight)' * * 'int con_get_cmap(char *)' * 'int con_set_cmap(char *)' * * 'int reset_palette(int currcons)' * 'void set_palette(void)' * * 'void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry)' * 'int mouse_reporting(void)' * * Hopefully this will be a rather complete VT102 implementation. * * Beeping thanks to John T Kohl. * * Virtual Consoles, Screen Blanking, Screen Dumping, Color, Graphics * Chars, and VT100 enhancements by Peter MacDonald. * * Copy and paste function by Andrew Haylett, * some enhancements by Alessandro Rubini. * * User definable mapping table and font loading by Eugene G. Crosser, * * * Code to check for different video-cards mostly by Galen Hunt, * * * Rudimentary ISO 10646/Unicode/UTF-8 character set support by * Markus Kuhn, . * * Dynamic allocation of consoles, aeb@cwi.nl, May 1994 * Resizing of consoles, aeb, 940926 * * Code for xterm like mouse click reporting by Peter Orbaek 20-Jul-94 * * * Improved loadable font/UTF-8 support by H. Peter Anvin, Feb 1995 * * improved scrollback, plus colour palette handling, by Simon Tatham * 17-Jun-95 * */ #define BLANK 0x0020 #define CAN_LOAD_EGA_FONTS /* undefine if the user must not do this */ #define CAN_LOAD_PALETTE /* undefine if the user must not do this */ /* A bitmap for codes <32. A bit of 1 indicates that the code * corresponding to that bit number invokes some special action * (such as cursor movement) and should not be displayed as a * glyph unless the disp_ctrl mode is explicitly enabled. */ #define CTRL_ACTION 0x0d00ff81 #define CTRL_ALWAYS 0x0800f501 /* Cannot be overridden by disp_ctrl */ /* * NOTE!!! We sometimes disable and enable interrupts for a short while * (to put a word in video IO), but this will work even for keyboard * interrupts. We know interrupts aren't enabled when getting a keyboard * interrupt, as we use trap-gates. Hopefully all is well. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "kbd_kern.h" #include "vt_kern.h" #include "consolemap.h" #include "selection.h" #ifndef MIN #define MIN(a,b) ((a) < (b) ? (a) : (b)) #endif struct tty_driver console_driver; static int console_refcount; static struct tty_struct *console_table[MAX_NR_CONSOLES]; static struct termios *console_termios[MAX_NR_CONSOLES]; static struct termios *console_termios_locked[MAX_NR_CONSOLES]; #define NPAR 16 static void con_setsize(unsigned long rows, unsigned long cols); static void vc_init(unsigned int console, unsigned long rows, unsigned long cols, int do_clear); static void get_scrmem(int currcons); static void set_scrmem(int currcons, long offset); static void set_origin(int currcons); static void blank_screen(void); static void unblank_screen(void); void poke_blanked_console(void); static void gotoxy(int currcons, int new_x, int new_y); static void save_cur(int currcons); static inline void set_cursor(int currcons); static void reset_terminal(int currcons, int do_clear); extern void reset_vc(unsigned int new_console); extern void vt_init(void); extern void register_console(void (*proc)(const char *)); extern void vesa_blank(void); extern void vesa_unblank(void); extern void compute_shiftstate(void); extern void reset_palette (int currcons) ; extern void set_palette (void) ; /* Description of the hardware situation */ static unsigned char video_type; /* Type of display being used */ static unsigned long video_mem_base; /* Base of video memory */ static unsigned long video_mem_term; /* End of video memory */ static unsigned char video_page; /* Initial video page (unused) */ /* these two also used in vesa_blank.c */ unsigned short video_port_reg; /* Video register select port */ unsigned short video_port_val; /* Video register value port */ /* these three also used in selection.c */ unsigned long video_num_columns; /* Number of text columns */ unsigned long video_num_lines; /* Number of text lines */ unsigned long video_size_row; static unsigned long video_screen_size; static int can_do_color = 0; static int printable = 0; /* Is console ready for printing? */ /* these two also used in in vt.c */ int video_mode_512ch = 0; /* 512-character mode */ unsigned long video_font_height; /* Height of current screen font */ unsigned long video_scan_lines; /* Number of scan lines on screen */ static unsigned short console_charmask = 0x0ff; static unsigned short *vc_scrbuf[MAX_NR_CONSOLES]; static int console_blanked = 0; static int blankinterval = 10*60*HZ; static long blank_origin, blank__origin, unblank_origin; struct vc_data { unsigned long vc_screenbuf_size; unsigned short vc_video_erase_char; /* Background erase character */ unsigned char vc_attr; /* Current attributes */ unsigned char vc_def_color; /* Default colors */ unsigned char vc_color; /* Foreground & background */ unsigned char vc_s_color; /* Saved foreground & background */ unsigned char vc_ulcolor; /* Colour for underline mode */ unsigned char vc_halfcolor; /* Colour for half intensity mode */ unsigned long vc_origin; /* Used for EGA/VGA fast scroll */ unsigned long vc_scr_end; /* Used for EGA/VGA fast scroll */ unsigned long vc_pos; unsigned long vc_x,vc_y; unsigned long vc_top,vc_bottom; unsigned long vc_state; unsigned long vc_npar,vc_par[NPAR]; unsigned long vc_video_mem_start; /* Start of video RAM */ unsigned long vc_video_mem_end; /* End of video RAM (sort of) */ unsigned long vc_saved_x; unsigned long vc_saved_y; /* mode flags */ unsigned long vc_charset : 1; /* Character set G0 / G1 */ unsigned long vc_s_charset : 1; /* Saved character set */ unsigned long vc_disp_ctrl : 1; /* Display chars < 32? */ unsigned long vc_toggle_meta : 1; /* Toggle high bit? */ unsigned long vc_decscnm : 1; /* Screen Mode */ unsigned long vc_decom : 1; /* Origin Mode */ unsigned long vc_decawm : 1; /* Autowrap Mode */ unsigned long vc_deccm : 1; /* Cursor Visible */ unsigned long vc_decim : 1; /* Insert Mode */ unsigned long vc_deccolm : 1; /* 80/132 Column Mode */ /* attribute flags */ unsigned long vc_intensity : 2; /* 0=half-bright, 1=normal, 2=bold */ unsigned long vc_underline : 1; unsigned long vc_blink : 1; unsigned long vc_reverse : 1; unsigned long vc_s_intensity : 2; /* saved rendition */ unsigned long vc_s_underline : 1; unsigned long vc_s_blink : 1; unsigned long vc_s_reverse : 1; /* misc */ unsigned long vc_ques : 1; unsigned long vc_need_wrap : 1; unsigned long vc_has_scrolled : 1; /* Info for unblank_screen */ unsigned long vc_kmalloced : 1; /* kfree_s() needed */ unsigned long vc_report_mouse : 2; unsigned char vc_utf : 1; /* Unicode UTF-8 encoding */ unsigned char vc_utf_count; long vc_utf_char; unsigned long vc_tab_stop[5]; /* Tab stops. 160 columns. */ unsigned char vc_palette[16*3]; /* Colour palette for VGA+ */ unsigned short * vc_translate; unsigned char vc_G0_charset; unsigned char vc_G1_charset; unsigned char vc_saved_G0; unsigned char vc_saved_G1; /* additional information is in vt_kern.h */ }; static struct vc { struct vc_data *d; /* might add scrmem, vt_struct, kbd at some time, to have everything in one place - the disadvantage would be that vc_cons etc can no longer be static */ } vc_cons [MAX_NR_CONSOLES]; #define screenbuf_size (vc_cons[currcons].d->vc_screenbuf_size) #define origin (vc_cons[currcons].d->vc_origin) #define scr_end (vc_cons[currcons].d->vc_scr_end) #define pos (vc_cons[currcons].d->vc_pos) #define top (vc_cons[currcons].d->vc_top) #define bottom (vc_cons[currcons].d->vc_bottom) #define x (vc_cons[currcons].d->vc_x) #define y (vc_cons[currcons].d->vc_y) #define vc_state (vc_cons[currcons].d->vc_state) #define npar (vc_cons[currcons].d->vc_npar) #define par (vc_cons[currcons].d->vc_par) #define ques (vc_cons[currcons].d->vc_ques) #define attr (vc_cons[currcons].d->vc_attr) #define saved_x (vc_cons[currcons].d->vc_saved_x) #define saved_y (vc_cons[currcons].d->vc_saved_y) #define translate (vc_cons[currcons].d->vc_translate) #define G0_charset (vc_cons[currcons].d->vc_G0_charset) #define G1_charset (vc_cons[currcons].d->vc_G1_charset) #define saved_G0 (vc_cons[currcons].d->vc_saved_G0) #define saved_G1 (vc_cons[currcons].d->vc_saved_G1) #define utf (vc_cons[currcons].d->vc_utf) #define utf_count (vc_cons[currcons].d->vc_utf_count) #define utf_char (vc_cons[currcons].d->vc_utf_char) #define video_mem_start (vc_cons[currcons].d->vc_video_mem_start) #define video_mem_end (vc_cons[currcons].d->vc_video_mem_end) #define video_erase_char (vc_cons[currcons].d->vc_video_erase_char) #define disp_ctrl (vc_cons[currcons].d->vc_disp_ctrl) #define toggle_meta (vc_cons[currcons].d->vc_toggle_meta) #define decscnm (vc_cons[currcons].d->vc_decscnm) #define decom (vc_cons[currcons].d->vc_decom) #define decawm (vc_cons[currcons].d->vc_decawm) #define deccm (vc_cons[currcons].d->vc_deccm) #define decim (vc_cons[currcons].d->vc_decim) #define deccolm (vc_cons[currcons].d->vc_deccolm) #define need_wrap (vc_cons[currcons].d->vc_need_wrap) #define has_scrolled (vc_cons[currcons].d->vc_has_scrolled) #define kmalloced (vc_cons[currcons].d->vc_kmalloced) #define report_mouse (vc_cons[currcons].d->vc_report_mouse) #define color (vc_cons[currcons].d->vc_color) #define s_color (vc_cons[currcons].d->vc_s_color) #define def_color (vc_cons[currcons].d->vc_def_color) #define foreground (color & 0x0f) #define background (color & 0xf0) #define charset (vc_cons[currcons].d->vc_charset) #define s_charset (vc_cons[currcons].d->vc_s_charset) #define intensity (vc_cons[currcons].d->vc_intensity) #define underline (vc_cons[currcons].d->vc_underline) #define blink (vc_cons[currcons].d->vc_blink) #define reverse (vc_cons[currcons].d->vc_reverse) #define s_intensity (vc_cons[currcons].d->vc_s_intensity) #define s_underline (vc_cons[currcons].d->vc_s_underline) #define s_blink (vc_cons[currcons].d->vc_s_blink) #define s_reverse (vc_cons[currcons].d->vc_s_reverse) #define ulcolor (vc_cons[currcons].d->vc_ulcolor) #define halfcolor (vc_cons[currcons].d->vc_halfcolor) #define tab_stop (vc_cons[currcons].d->vc_tab_stop) #define palette (vc_cons[currcons].d->vc_palette) #define vcmode (vt_cons[currcons]->vc_mode) #define structsize (sizeof(struct vc_data) + sizeof(struct vt_struct)) static void memsetw(void * s, unsigned short c, unsigned int count) { unsigned short * addr = (unsigned short *) s; count /= 2; while (count) { count--; scr_writew(c, addr++); } } static inline void memcpyw(unsigned short *to, unsigned short *from, unsigned int count) { count /= 2; while (count) { count--; scr_writew(scr_readw(from++), to++); } } int vc_cons_allocated(unsigned int i) { return (i < MAX_NR_CONSOLES && vc_cons[i].d); } int vc_allocate(unsigned int i) /* return 0 on success */ { if (i >= MAX_NR_CONSOLES) return -ENODEV; if (!vc_cons[i].d) { long p, q; /* prevent users from taking too much memory */ if (i >= MAX_NR_USER_CONSOLES && !suser()) return -EPERM; /* due to the granularity of kmalloc, we waste some memory here */ /* the alloc is done in two steps, to optimize the common situation of a 25x80 console (structsize=216, video_screen_size=4000) */ q = (long) kmalloc(video_screen_size, GFP_KERNEL); if (!q) return -ENOMEM; p = (long) kmalloc(structsize, GFP_KERNEL); if (!p) { kfree_s((char *) q, video_screen_size); return -ENOMEM; } vc_cons[i].d = (struct vc_data *) p; p += sizeof(struct vc_data); vt_cons[i] = (struct vt_struct *) p; vc_scrbuf[i] = (unsigned short *) q; vc_cons[i].d->vc_kmalloced = 1; vc_cons[i].d->vc_screenbuf_size = video_screen_size; vc_init (i, video_num_lines, video_num_columns, 1); } return 0; } /* * Change # of rows and columns (0 means unchanged) * [this is to be used together with some user program * like resize that changes the hardware videomode] */ int vc_resize(unsigned long lines, unsigned long cols) { unsigned long cc, ll, ss, sr; unsigned long occ, oll, oss, osr; unsigned short *p; unsigned int currcons, i; unsigned short *newscreens[MAX_NR_CONSOLES]; long ol, nl, rlth, rrem; cc = (cols ? cols : video_num_columns); ll = (lines ? lines : video_num_lines); sr = cc << 1; ss = sr * ll; if (ss > video_mem_term - video_mem_base) return -ENOMEM; /* * Some earlier version had all consoles of potentially * different sizes, but that was really messy. * So now we only change if there is room for all consoles * of the same size. */ for (currcons = 0; currcons < MAX_NR_CONSOLES; currcons++) { if (!vc_cons_allocated(currcons)) newscreens[currcons] = 0; else { p = (unsigned short *) kmalloc(ss, GFP_USER); if (!p) { for (i = 0; i< currcons; i++) if (newscreens[i]) kfree_s(newscreens[i], ss); return -ENOMEM; } newscreens[currcons] = p; } } get_scrmem(fg_console); oll = video_num_lines; occ = video_num_columns; osr = video_size_row; oss = video_screen_size; video_num_lines = ll; video_num_columns = cc; video_size_row = sr; video_screen_size = ss; for (currcons = 0; currcons < MAX_NR_CONSOLES; currcons++) { if (!vc_cons_allocated(currcons)) continue; rlth = MIN(osr, sr); rrem = sr - rlth; ol = origin; nl = (long) newscreens[currcons]; if (ll < oll) ol += (oll - ll) * osr; while (ol < scr_end) { memcpyw((unsigned short *) nl, (unsigned short *) ol, rlth); if (rrem) memsetw((void *)(nl + rlth), video_erase_char, rrem); ol += osr; nl += sr; } if (kmalloced) kfree_s(vc_scrbuf[currcons], screenbuf_size); vc_scrbuf[currcons] = newscreens[currcons]; kmalloced = 1; screenbuf_size = ss; origin = video_mem_start = (long) vc_scrbuf[currcons]; scr_end = video_mem_end = video_mem_start + ss; if (scr_end > nl) memsetw((void *) nl, video_erase_char, scr_end - nl); /* do part of a reset_terminal() */ top = 0; bottom = video_num_lines; gotoxy(currcons, x, y); save_cur(currcons); } set_scrmem(fg_console, 0); set_origin(fg_console); set_cursor(fg_console); return 0; } void vc_disallocate(unsigned int currcons) { if (vc_cons_allocated(currcons)) { if (kmalloced) kfree_s(vc_scrbuf[currcons], screenbuf_size); if (currcons >= MIN_NR_CONSOLES) kfree_s(vc_cons[currcons].d, structsize); vc_cons[currcons].d = 0; } } #define set_kbd(x) set_vc_kbd_mode(kbd_table+currcons,x) #define clr_kbd(x) clr_vc_kbd_mode(kbd_table+currcons,x) #define is_kbd(x) vc_kbd_mode(kbd_table+currcons,x) #define decarm VC_REPEAT #define decckm VC_CKMODE #define kbdapplic VC_APPLIC #define lnm VC_CRLF /* * this is what the terminal answers to a ESC-Z or csi0c query. */ #define VT100ID "\033[?1;2c" #define VT102ID "\033[?6c" static unsigned char color_table[] = { 0, 4, 2, 6, 1, 5, 3, 7, 8,12,10,14, 9,13,11,15 }; /* the default colour table, for VGA+ colour systems */ static int default_red[] = {0x00,0xaa,0x00,0xaa,0x00,0xaa,0x00,0xaa, 0x55,0xff,0x55,0xff,0x55,0xff,0x55,0xff}; static int default_grn[] = {0x00,0x00,0xaa,0x55,0x00,0x00,0xaa,0xaa, 0x55,0x55,0xff,0xff,0x55,0x55,0xff,0xff}; static int default_blu[] = {0x00,0x00,0x00,0x00,0xaa,0xaa,0xaa,0xaa, 0x55,0x55,0x55,0x55,0xff,0xff,0xff,0xff}; /* * gotoxy() must verify all boundaries, because the arguments * might also be negative. If the given position is out of * bounds, the cursor is placed at the nearest margin. */ static void gotoxy(int currcons, int new_x, int new_y) { int max_y; if (new_x < 0) x = 0; else if (new_x >= video_num_columns) x = video_num_columns - 1; else x = new_x; if (decom) { new_y += top; max_y = bottom; } else max_y = video_num_lines; if (new_y < 0) y = 0; else if (new_y >= max_y) y = max_y - 1; else y = new_y; pos = origin + y*video_size_row + (x<<1); need_wrap = 0; } /* * Hardware scrollback support */ static unsigned short __real_origin; static unsigned short __origin; /* offset of currently displayed screen */ #define last_lpos (((video_mem_term-video_mem_base)/video_num_columns/2)-video_num_lines+1) #define last_origin_rel ( last_lpos * video_num_columns ) #define last_origin ( video_mem_base + last_origin_rel * 2 ) static unsigned short __scrollback_mode; /* 1 means scrollback can wrap */ static inline void __set_origin(unsigned short offset) { unsigned long flags; clear_selection(); save_flags(flags); cli(); __origin = offset; outb_p(12, video_port_reg); outb_p(offset >> 8, video_port_val); outb_p(13, video_port_reg); outb_p(offset, video_port_val); restore_flags(flags); } void scrollback(int lines) { if (!lines) lines = video_num_lines/2; lines *= video_num_columns; lines = __origin - lines; if (__scrollback_mode == 0) { if (lines < 0) lines = 0; } else { int s_top = __real_origin+video_num_lines*video_num_columns ; if (lines < 0) { int count ; unsigned short * d = (unsigned short *) video_mem_base; unsigned short * s = (unsigned short *) last_origin; lines += last_origin_rel; /* in case the top part of the screen has been modified since * the scroll wrapped, copy the top bit back to the bottom */ count = (video_num_lines-1)*video_num_columns; while (count) { count--; scr_writew(scr_readw(d++),s++); } } else if (__origin > __real_origin && lines < s_top) lines = s_top ; } __set_origin(lines); } void scrollfront(int lines) { if (!lines) lines = video_num_lines/2; lines *= video_num_columns; if (__origin > __real_origin) { /* assume __scrollback_mode == 1 */ lines += __origin; if (lines >= last_origin_rel) { lines -= last_origin_rel ; if (lines > __real_origin) lines = __real_origin; } } else { lines += __origin; if (lines > __real_origin) lines = __real_origin; } __set_origin(lines); } static void set_origin(int currcons) { if (video_type != VIDEO_TYPE_EGAC && video_type != VIDEO_TYPE_VGAC && video_type != VIDEO_TYPE_EGAM) return; if (currcons != fg_console || console_blanked || vcmode == KD_GRAPHICS) return; __real_origin = (origin-video_mem_base) >> 1; __set_origin(__real_origin); } /* * Put the cursor just beyond the end of the display adaptor memory. */ static inline void hide_cursor(void) { /* This is inefficient, we could just put the cursor at 0xffff, but perhaps the delays due to the inefficiency are useful for some hardware... */ outb_p(14, video_port_reg); outb_p(0xff&((video_mem_term-video_mem_base)>>9), video_port_val); outb_p(15, video_port_reg); outb_p(0xff&((video_mem_term-video_mem_base)>>1), video_port_val); } static inline void set_cursor(int currcons) { unsigned long flags; if (currcons != fg_console || console_blanked || vcmode == KD_GRAPHICS) return; if (__real_origin != __origin) __set_origin(__real_origin); save_flags(flags); cli(); if (deccm) { outb_p(14, video_port_reg); outb_p(0xff&((pos-video_mem_base)>>9), video_port_val); outb_p(15, video_port_reg); outb_p(0xff&((pos-video_mem_base)>>1), video_port_val); } else hide_cursor(); restore_flags(flags); } static void scrup(int currcons, unsigned int t, unsigned int b) { int hardscroll = 1; if (b > video_num_lines || t >= b) return; if (video_type != VIDEO_TYPE_EGAC && video_type != VIDEO_TYPE_VGAC && video_type != VIDEO_TYPE_EGAM) hardscroll = 0; else if (t || b != video_num_lines) hardscroll = 0; if (hardscroll) { origin += video_size_row; pos += video_size_row; scr_end += video_size_row; if (origin >= last_origin) { unsigned short * d = (unsigned short *) video_mem_start; unsigned short * s = (unsigned short *) origin; unsigned int count; count = (video_num_lines-1)*video_num_columns; while (count) { count--; scr_writew(scr_readw(s++),d++); } count = video_num_columns; while (count) { count--; scr_writew(video_erase_char, d++); } scr_end -= origin-video_mem_start; pos -= origin-video_mem_start; origin = video_mem_start; has_scrolled = 1; if (currcons == fg_console) __scrollback_mode = 1; } else { unsigned short * d; unsigned int count; d = (unsigned short *) (scr_end - video_size_row); count = video_num_columns; while (count) { count--; scr_writew(video_erase_char, d++); } if (scr_end > last_origin) /* we've wrapped into kept region */ __scrollback_mode = 0; } set_origin(currcons); } else { unsigned short * d = (unsigned short *) (origin+video_size_row*t); unsigned short * s = (unsigned short *) (origin+video_size_row*(t+1)); unsigned int count = (b-t-1) * video_num_columns; while (count) { count--; scr_writew(scr_readw(s++), d++); } count = video_num_columns; while (count) { count--; scr_writew(video_erase_char, d++); } } } static void scrdown(int currcons, unsigned int t, unsigned int b) { unsigned short *d, *s; unsigned int count; if (b > video_num_lines || t >= b) return; d = (unsigned short *) (origin+video_size_row*b); s = (unsigned short *) (origin+video_size_row*(b-1)); count = (b-t-1)*video_num_columns; while (count) { count--; scr_writew(scr_readw(--s), --d); } count = video_num_columns; while (count) { count--; scr_writew(video_erase_char, --d); } has_scrolled = 1; } static void lf(int currcons) { /* don't scroll if above bottom of scrolling region, or * if below scrolling region */ if (y+1 == bottom) scrup(currcons,top,bottom); else if (y < video_num_lines-1) { y++; pos += video_size_row; } need_wrap = 0; } static void ri(int currcons) { /* don't scroll if below top of scrolling region, or * if above scrolling region */ if (y == top) scrdown(currcons,top,bottom); else if (y > 0) { y--; pos -= video_size_row; } need_wrap = 0; } static inline void cr(int currcons) { pos -= x<<1; need_wrap = x = 0; } static inline void bs(int currcons) { if (x) { pos -= 2; x--; need_wrap = 0; } } static inline void del(int currcons) { /* ignored */ } static void csi_J(int currcons, int vpar) { unsigned long count; unsigned short * start; switch (vpar) { case 0: /* erase from cursor to end of display */ count = (scr_end-pos)>>1; start = (unsigned short *) pos; break; case 1: /* erase from start to cursor */ count = ((pos-origin)>>1)+1; start = (unsigned short *) origin; break; case 2: /* erase whole display */ count = video_num_columns * video_num_lines; start = (unsigned short *) origin; break; default: return; } while (count) { count--; scr_writew(video_erase_char, start++); } need_wrap = 0; } static void csi_K(int currcons, int vpar) { unsigned long count; unsigned short * start; switch (vpar) { case 0: /* erase from cursor to end of line */ count = video_num_columns-x; start = (unsigned short *) pos; break; case 1: /* erase from start of line to cursor */ start = (unsigned short *) (pos - (x<<1)); count = x+1; break; case 2: /* erase whole line */ start = (unsigned short *) (pos - (x<<1)); count = video_num_columns; break; default: return; } while (count) { count--; scr_writew(video_erase_char, start++); } need_wrap = 0; } static void csi_X(int currcons, int vpar) /* erase the following vpar positions */ { /* not vt100? */ unsigned long count; unsigned short * start; if (!vpar) vpar++; start = (unsigned short *) pos; count = (vpar > video_num_columns-x) ? (video_num_columns-x) : vpar; while (count) { count--; scr_writew(video_erase_char, start++); } need_wrap = 0; } static void update_attr(int currcons) { attr = color; if (can_do_color) { if (underline) attr = (attr & 0xf0) | ulcolor; else if (intensity == 0) attr = (attr & 0xf0) | halfcolor; } if (reverse ^ decscnm) attr = reverse_video_char(attr); if (blink) attr ^= 0x80; if (intensity == 2) attr ^= 0x08; if (!can_do_color) { if (underline) attr = (attr & 0xf8) | 0x01; else if (intensity == 0) attr = (attr & 0xf0) | 0x08; } if (decscnm) video_erase_char = (reverse_video_char(color) << 8) | ' '; else video_erase_char = (color << 8) | ' '; } static void default_attr(int currcons) { intensity = 1; underline = 0; reverse = 0; blink = 0; color = def_color; } static void csi_m(int currcons) { int i; for (i=0;i<=npar;i++) switch (par[i]) { case 0: /* all attributes off */ default_attr(currcons); break; case 1: intensity = 2; break; case 2: intensity = 0; break; case 4: underline = 1; break; case 5: blink = 1; break; case 7: reverse = 1; break; case 10: /* ANSI X3.64-1979 (SCO-ish?) * Select primary font, don't display * control chars if defined, don't set * bit 8 on output. */ translate = set_translate(charset == 0 ? G0_charset : G1_charset); disp_ctrl = 0; toggle_meta = 0; break; case 11: /* ANSI X3.64-1979 (SCO-ish?) * Select first alternate font, let's * chars < 32 be displayed as ROM chars. */ translate = set_translate(IBMPC_MAP); disp_ctrl = 1; toggle_meta = 0; break; case 12: /* ANSI X3.64-1979 (SCO-ish?) * Select second alternate font, toggle * high bit before displaying as ROM char. */ translate = set_translate(IBMPC_MAP); disp_ctrl = 1; toggle_meta = 1; break; case 21: case 22: intensity = 1; break; case 24: underline = 0; break; case 25: blink = 0; break; case 27: reverse = 0; break; case 38: /* ANSI X3.64-1979 (SCO-ish?) * Enables underscore, white foreground * with white underscore (Linux - use * default foreground). */ color = (def_color & 0x0f) | background; underline = 1; break; case 39: /* ANSI X3.64-1979 (SCO-ish?) * Disable underline option. * Reset colour to default? It did this * before... */ color = (def_color & 0x0f) | background; underline = 0; break; case 49: color = (def_color & 0xf0) | foreground; break; default: if (par[i] >= 30 && par[i] <= 37) color = color_table[par[i]-30] | background; else if (par[i] >= 40 && par[i] <= 47) color = (color_table[par[i]-40]<<4) | foreground; break; } update_attr(currcons); } static void respond_string(const char * p, struct tty_struct * tty) { while (*p) { tty_insert_flip_char(tty, *p, 0); p++; } tty_schedule_flip(tty); } static void cursor_report(int currcons, struct tty_struct * tty) { char buf[40]; sprintf(buf, "\033[%ld;%ldR", y + (decom ? top+1 : 1), x+1); respond_string(buf, tty); } static inline void status_report(struct tty_struct * tty) { respond_string("\033[0n", tty); /* Terminal ok */ } static inline void respond_ID(struct tty_struct * tty) { respond_string(VT102ID, tty); } void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry) { char buf[8]; sprintf(buf, "\033[M%c%c%c", (char)(' ' + butt), (char)('!' + mrx), (char)('!' + mry)); respond_string(buf, tty); } /* invoked via ioctl(TIOCLINUX) */ int mouse_reporting(void) { int currcons = fg_console; return report_mouse; } static inline unsigned short *screenpos(int currcons, int offset, int viewed) { unsigned short *p = (unsigned short *)(origin + offset); if (viewed && currcons == fg_console) p -= (__real_origin - __origin); return p; } /* Note: inverting the screen twice should revert to the original state */ void invert_screen(int currcons, int offset, int count, int viewed) { unsigned short *p; count /= 2; p = screenpos(currcons, offset, viewed); if (can_do_color) while (count--) { unsigned short old = scr_readw(p); scr_writew(reverse_video_short(old), p); p++; } else while (count--) { unsigned short old = scr_readw(p); scr_writew(old ^ (((old & 0x0700) == 0x0100) ? 0x7000 : 0x7700), p); p++; } } /* used by selection: complement pointer position */ void complement_pos(int currcons, int offset) { static unsigned short *p = NULL; static unsigned short old = 0; if (p) scr_writew(old, p); if (offset == -1) p = NULL; else { p = screenpos(currcons, offset, 1); old = scr_readw(p); scr_writew(old ^ 0x7700, p); } } /* used by selection */ unsigned short screen_word(int currcons, int offset, int viewed) { return scr_readw(screenpos(currcons, offset, viewed)); } /* used by vcs - note the word offset */ unsigned short *screen_pos(int currcons, int w_offset, int viewed) { return screenpos(currcons, 2 * w_offset, viewed); } void getconsxy(int currcons, char *p) { p[0] = x; p[1] = y; } void putconsxy(int currcons, char *p) { gotoxy(currcons, p[0], p[1]); set_cursor(currcons); } static void set_mode(int currcons, int on_off) { int i; for (i=0; i<=npar; i++) if (ques) switch(par[i]) { /* DEC private modes set/reset */ case 1: /* Cursor keys send ^[Ox/^[[x */ if (on_off) set_kbd(decckm); else clr_kbd(decckm); break; case 3: /* 80/132 mode switch unimplemented */ deccolm = on_off; #if 0 (void) vc_resize(video_num_lines, deccolm ? 132 : 80); /* this alone does not suffice; some user mode utility has to change the hardware regs */ #endif break; case 5: /* Inverted screen on/off */ if (decscnm != on_off) { decscnm = on_off; invert_screen(currcons, 0, video_screen_size, 0); update_attr(currcons); } break; case 6: /* Origin relative/absolute */ decom = on_off; gotoxy(currcons,0,0); break; case 7: /* Autowrap on/off */ decawm = on_off; break; case 8: /* Autorepeat on/off */ if (on_off) set_kbd(decarm); else clr_kbd(decarm); break; case 9: report_mouse = on_off ? 1 : 0; break; case 25: /* Cursor on/off */ deccm = on_off; set_cursor(currcons); break; case 1000: report_mouse = on_off ? 2 : 0; break; } else switch(par[i]) { /* ANSI modes set/reset */ case 3: /* Monitor (display ctrls) */ disp_ctrl = on_off; break; case 4: /* Insert Mode on/off */ decim = on_off; break; case 20: /* Lf, Enter == CrLf/Lf */ if (on_off) set_kbd(lnm); else clr_kbd(lnm); break; } } static void setterm_command(int currcons) { switch(par[0]) { case 1: /* set color for underline mode */ if (can_do_color && par[1] < 16) { ulcolor = color_table[par[1]]; if (underline) update_attr(currcons); } break; case 2: /* set color for half intensity mode */ if (can_do_color && par[1] < 16) { halfcolor = color_table[par[1]]; if (intensity == 0) update_attr(currcons); } break; case 8: /* store colors as defaults */ def_color = attr; default_attr(currcons); update_attr(currcons); break; case 9: /* set blanking interval */ blankinterval = ((par[1] < 60) ? par[1] : 60) * 60 * HZ; poke_blanked_console(); break; } } static void insert_char(int currcons) { unsigned int i = x; unsigned short tmp, old = video_erase_char; unsigned short * p = (unsigned short *) pos; while (i++ < video_num_columns) { tmp = scr_readw(p); scr_writew(old, p); old = tmp; p++; } need_wrap = 0; } static void insert_line(int currcons) { scrdown(currcons,y,bottom); need_wrap = 0; } static void delete_char(int currcons) { unsigned int i = x; unsigned short * p = (unsigned short *) pos; while (++i < video_num_columns) { scr_writew(scr_readw(p+1), p); p++; } scr_writew(video_erase_char, p); need_wrap = 0; } static void delete_line(int currcons) { scrup(currcons,y,bottom); need_wrap = 0; } static void csi_at(int currcons, unsigned int nr) { if (nr > video_num_columns) nr = video_num_columns; else if (!nr) nr = 1; while (nr--) insert_char(currcons); } static void csi_L(int currcons, unsigned int nr) { if (nr > video_num_lines) nr = video_num_lines; else if (!nr) nr = 1; while (nr--) insert_line(currcons); } static void csi_P(int currcons, unsigned int nr) { if (nr > video_num_columns) nr = video_num_columns; else if (!nr) nr = 1; while (nr--) delete_char(currcons); } static void csi_M(int currcons, unsigned int nr) { if (nr > video_num_lines) nr = video_num_lines; else if (!nr) nr=1; while (nr--) delete_line(currcons); } static void save_cur(int currcons) { saved_x = x; saved_y = y; s_intensity = intensity; s_underline = underline; s_blink = blink; s_reverse = reverse; s_charset = charset; s_color = color; saved_G0 = G0_charset; saved_G1 = G1_charset; } static void restore_cur(int currcons) { gotoxy(currcons,saved_x,saved_y); intensity = s_intensity; underline = s_underline; blink = s_blink; reverse = s_reverse; charset = s_charset; color = s_color; G0_charset = saved_G0; G1_charset = saved_G1; translate = set_translate(charset ? G1_charset : G0_charset); update_attr(currcons); need_wrap = 0; } enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey, EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd, ESpalette }; static void reset_terminal(int currcons, int do_clear) { top = 0; bottom = video_num_lines; vc_state = ESnormal; ques = 0; translate = set_translate(LAT1_MAP); G0_charset = LAT1_MAP; G1_charset = GRAF_MAP; charset = 0; need_wrap = 0; report_mouse = 0; utf = 0; utf_count = 0; disp_ctrl = 0; toggle_meta = 0; decscnm = 0; decom = 0; decawm = 1; deccm = 1; decim = 0; set_kbd(decarm); clr_kbd(decckm); clr_kbd(kbdapplic); clr_kbd(lnm); kbd_table[currcons].lockstate = 0; kbd_table[currcons].ledmode = LED_SHOW_FLAGS; kbd_table[currcons].ledflagstate = kbd_table[currcons].default_ledflagstate; set_leds(); default_attr(currcons); update_attr(currcons); tab_stop[0] = 0x01010100; tab_stop[1] = tab_stop[2] = tab_stop[3] = tab_stop[4] = 0x01010101; gotoxy(currcons,0,0); save_cur(currcons); if (do_clear) csi_J(currcons,2); } /* * Turn the Scroll-Lock LED on when the tty is stopped */ static void con_stop(struct tty_struct *tty) { int console_num; if (!tty) return; console_num = MINOR(tty->device) - (tty->driver.minor_start); if (!vc_cons_allocated(console_num)) return; set_vc_kbd_led(kbd_table + console_num, VC_SCROLLOCK); set_leds(); } /* * Turn the Scroll-Lock LED off when the console is started */ static void con_start(struct tty_struct *tty) { int console_num; if (!tty) return; console_num = MINOR(tty->device) - (tty->driver.minor_start); if (!vc_cons_allocated(console_num)) return; clr_vc_kbd_led(kbd_table + console_num, VC_SCROLLOCK); set_leds(); } static int con_write(struct tty_struct * tty, int from_user, const unsigned char *buf, int count) { int c, tc, ok, n = 0; unsigned int currcons; struct vt_struct *vt = (struct vt_struct *)tty->driver_data; currcons = vt->vc_num; if (!vc_cons_allocated(currcons)) { /* could this happen? */ static int error = 0; if (!error) { error = 1; printk("con_write: tty %d not allocated\n", currcons+1); } return 0; } if (currcons == sel_cons) clear_selection(); disable_bh(KEYBOARD_BH); while (!tty->stopped && count) { c = from_user ? get_user(buf) : *buf; buf++; n++; count--; if (utf) { /* Combine UTF-8 into Unicode */ /* Incomplete characters silently ignored */ if(c > 0x7f) { if (utf_count > 0 && (c & 0xc0) == 0x80) { utf_char = (utf_char << 6) | (c & 0x3f); utf_count--; if (utf_count == 0) tc = c = utf_char; else continue; } else { if ((c & 0xe0) == 0xc0) { utf_count = 1; utf_char = (c & 0x1f); } else if ((c & 0xf0) == 0xe0) { utf_count = 2; utf_char = (c & 0x0f); } else if ((c & 0xf8) == 0xf0) { utf_count = 3; utf_char = (c & 0x07); } else if ((c & 0xfc) == 0xf8) { utf_count = 4; utf_char = (c & 0x03); } else if ((c & 0xfe) == 0xfc) { utf_count = 5; utf_char = (c & 0x01); } else utf_count = 0; continue; } } else { tc = c; utf_count = 0; } } else { /* no utf */ tc = translate[toggle_meta ? (c|0x80) : c]; } /* If the original code was < 32 we only allow a * glyph to be displayed if the code is not normally * used (such as for cursor movement) or if the * disp_ctrl mode has been explicitly enabled. * Note: ESC is *never* allowed to be displayed as * that would disable all escape sequences! * To display font position 0x1B, go into UTF mode * and display character U+F01B, or change the mapping. */ ok = (tc && (c >= 32 || (!utf && !(((disp_ctrl ? CTRL_ALWAYS : CTRL_ACTION) >> c) & 1)))); if (vc_state == ESnormal && ok) { /* Now try to find out how to display it */ tc = conv_uni_to_pc(tc); if ( tc == -4 ) { /* If we got -4 (not found) then see if we have defined a replacement character (U+FFFD) */ tc = conv_uni_to_pc(0xfffd); } else if ( tc == -3 ) { /* Bad hash table -- hope for the best */ tc = c; } if (tc & ~console_charmask) continue; /* Conversion failed */ if (need_wrap) { cr(currcons); lf(currcons); } if (decim) insert_char(currcons); scr_writew( video_mode_512ch ? ((attr & 0xf7) << 8) + ((tc & 0x100) << 3) + (tc & 0x0ff) : (attr << 8) + tc, (unsigned short *) pos); if (x == video_num_columns - 1) need_wrap = decawm; else { x++; pos+=2; } continue; } /* * Control characters can be used in the _middle_ * of an escape sequence. */ switch (c) { case 7: kd_mksound(0x637, HZ/8); continue; case 8: bs(currcons); continue; case 9: pos -= (x << 1); while (x < video_num_columns - 1) { x++; if (tab_stop[x >> 5] & (1 << (x & 31))) break; } pos += (x << 1); continue; case 10: case 11: case 12: lf(currcons); if (!is_kbd(lnm)) continue; case 13: cr(currcons); continue; case 14: charset = 1; translate = set_translate(G1_charset); disp_ctrl = 1; continue; case 15: charset = 0; translate = set_translate(G0_charset); disp_ctrl = 0; continue; case 24: case 26: vc_state = ESnormal; continue; case 27: vc_state = ESesc; continue; case 127: del(currcons); continue; case 128+27: vc_state = ESsquare; continue; } switch(vc_state) { case ESesc: vc_state = ESnormal; switch (c) { case '[': vc_state = ESsquare; continue; case ']': vc_state = ESnonstd; continue; case '%': vc_state = ESpercent; continue; case 'E': cr(currcons); lf(currcons); continue; case 'M': ri(currcons); continue; case 'D': lf(currcons); continue; case 'H': tab_stop[x >> 5] |= (1 << (x & 31)); continue; case 'Z': respond_ID(tty); continue; case '7': save_cur(currcons); continue; case '8': restore_cur(currcons); continue; case '(': vc_state = ESsetG0; continue; case ')': vc_state = ESsetG1; continue; case '#': vc_state = EShash; continue; case 'c': reset_terminal(currcons,1); continue; case '>': /* Numeric keypad */ clr_kbd(kbdapplic); continue; case '=': /* Appl. keypad */ set_kbd(kbdapplic); continue; } continue; case ESnonstd: if (c=='P') { /* palette escape sequence */ for (npar=0; npar='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f') ) { par[npar++] = (c>'9' ? (c&0xDF)-'A'+10 : c-'0') ; if (npar==7) { int i = par[0]*3, j = 1; palette[i] = 16*par[j++]; palette[i++] += par[j++]; palette[i] = 16*par[j++]; palette[i++] += par[j++]; palette[i] = 16*par[j++]; palette[i] += par[j]; set_palette() ; vc_state = ESnormal; } } else vc_state = ESnormal; continue; case ESsquare: for(npar = 0 ; npar < NPAR ; npar++) par[npar] = 0; npar = 0; vc_state = ESgetpars; if (c == '[') { /* Function key */ vc_state=ESfunckey; continue; } ques = (c=='?'); if (ques) continue; case ESgetpars: if (c==';' && npar='0' && c<='9') { par[npar] *= 10; par[npar] += c-'0'; continue; } else vc_state=ESgotpars; case ESgotpars: vc_state = ESnormal; switch(c) { case 'h': set_mode(currcons,1); continue; case 'l': set_mode(currcons,0); continue; case 'n': if (!ques) if (par[0] == 5) status_report(tty); else if (par[0] == 6) cursor_report(currcons,tty); continue; } if (ques) { ques = 0; continue; } switch(c) { case 'G': case '`': if (par[0]) par[0]--; gotoxy(currcons,par[0],y); continue; case 'A': if (!par[0]) par[0]++; gotoxy(currcons,x,y-par[0]); continue; case 'B': case 'e': if (!par[0]) par[0]++; gotoxy(currcons,x,y+par[0]); continue; case 'C': case 'a': if (!par[0]) par[0]++; gotoxy(currcons,x+par[0],y); continue; case 'D': if (!par[0]) par[0]++; gotoxy(currcons,x-par[0],y); continue; case 'E': if (!par[0]) par[0]++; gotoxy(currcons,0,y+par[0]); continue; case 'F': if (!par[0]) par[0]++; gotoxy(currcons,0,y-par[0]); continue; case 'd': if (par[0]) par[0]--; gotoxy(currcons,x,par[0]); continue; case 'H': case 'f': if (par[0]) par[0]--; if (par[1]) par[1]--; gotoxy(currcons,par[1],par[0]); continue; case 'J': csi_J(currcons,par[0]); continue; case 'K': csi_K(currcons,par[0]); continue; case 'L': csi_L(currcons,par[0]); continue; case 'M': csi_M(currcons,par[0]); continue; case 'P': csi_P(currcons,par[0]); continue; case 'c': if (!par[0]) respond_ID(tty); continue; case 'g': if (!par[0]) tab_stop[x >> 5] &= ~(1 << (x & 31)); else if (par[0] == 3) { tab_stop[0] = tab_stop[1] = tab_stop[2] = tab_stop[3] = tab_stop[4] = 0; } continue; case 'm': csi_m(currcons); continue; case 'q': /* DECLL - but only 3 leds */ /* map 0,1,2,3 to 0,1,2,4 */ if (par[0] < 4) setledstate(kbd_table + currcons, (par[0] < 3) ? par[0] : 4); continue; case 'r': if (!par[0]) par[0]++; if (!par[1]) par[1] = video_num_lines; /* Minimum allowed region is 2 lines */ if (par[0] < par[1] && par[1] <= video_num_lines) { top=par[0]-1; bottom=par[1]; gotoxy(currcons,0,0); } continue; case 's': save_cur(currcons); continue; case 'u': restore_cur(currcons); continue; case 'X': csi_X(currcons, par[0]); continue; case '@': csi_at(currcons,par[0]); continue; case ']': /* setterm functions */ setterm_command(currcons); continue; } continue; case ESpercent: vc_state = ESnormal; switch (c) { case '@': /* defined in ISO 2022 */ utf = 0; continue; case 'G': /* prelim official escape code */ case '8': /* retained for compatibility */ utf = 1; continue; } continue; case ESfunckey: vc_state = ESnormal; continue; case EShash: vc_state = ESnormal; if (c == '8') { /* DEC screen alignment test. kludge :-) */ video_erase_char = (video_erase_char & 0xff00) | 'E'; csi_J(currcons, 2); video_erase_char = (video_erase_char & 0xff00) | ' '; } continue; case ESsetG0: if (c == '0') G0_charset = GRAF_MAP; else if (c == 'B') G0_charset = LAT1_MAP; else if (c == 'U') G0_charset = IBMPC_MAP; else if (c == 'K') G0_charset = USER_MAP; if (charset == 0) translate = set_translate(G0_charset); vc_state = ESnormal; continue; case ESsetG1: if (c == '0') G1_charset = GRAF_MAP; else if (c == 'B') G1_charset = LAT1_MAP; else if (c == 'U') G1_charset = IBMPC_MAP; else if (c == 'K') G1_charset = USER_MAP; if (charset == 1) translate = set_translate(G1_charset); vc_state = ESnormal; continue; default: vc_state = ESnormal; } } if (vcmode != KD_GRAPHICS) set_cursor(currcons); enable_bh(KEYBOARD_BH); return n; } static int con_write_room(struct tty_struct *tty) { if (tty->stopped) return 0; return 4096; /* No limit, really; we're not buffering */ } static int con_chars_in_buffer(struct tty_struct *tty) { return 0; /* we're not buffering */ } void poke_blanked_console(void) { timer_active &= ~(1<vc_mode == KD_GRAPHICS) return; if (console_blanked) { timer_table[BLANK_TIMER].expires = 0; timer_active |= 1<driver_data; wake_up_interruptible(&vt->paste_wait); } static void vc_init(unsigned int currcons, unsigned long rows, unsigned long cols, int do_clear) { long base = (long) vc_scrbuf[currcons]; int j, k ; video_num_columns = cols; video_num_lines = rows; video_size_row = cols<<1; video_screen_size = video_num_lines * video_size_row; pos = origin = video_mem_start = base; scr_end = base + video_screen_size; video_mem_end = base + video_screen_size; reset_vc(currcons); for (j=k=0; j<16; j++) { vc_cons[currcons].d->vc_palette[k++] = default_red[j] ; vc_cons[currcons].d->vc_palette[k++] = default_grn[j] ; vc_cons[currcons].d->vc_palette[k++] = default_blu[j] ; } def_color = 0x07; /* white */ ulcolor = 0x0f; /* bold white */ halfcolor = 0x08; /* grey */ vt_cons[currcons]->paste_wait = 0; reset_terminal(currcons, do_clear); } static void con_setsize(unsigned long rows, unsigned long cols) { video_num_lines = rows; video_num_columns = cols; video_size_row = 2 * cols; video_screen_size = video_num_lines * video_size_row; } /* * long con_init(long); * * This routine initializes console interrupts, and does nothing * else. If you want the screen to clear, call tty_write with * the appropriate escape-sequence. * * Reads the information preserved by setup.s to determine the current display * type and sets everything accordingly. */ long con_init(long kmem_start) { const char *display_desc = "????"; int currcons = 0; int orig_x = ORIG_X; int orig_y = ORIG_Y; memset(&console_driver, 0, sizeof(struct tty_driver)); console_driver.magic = TTY_DRIVER_MAGIC; console_driver.name = "tty"; console_driver.name_base = 1; console_driver.major = TTY_MAJOR; console_driver.minor_start = 1; console_driver.num = MAX_NR_CONSOLES; console_driver.type = TTY_DRIVER_TYPE_CONSOLE; console_driver.init_termios = tty_std_termios; console_driver.flags = TTY_DRIVER_REAL_RAW; console_driver.refcount = &console_refcount; console_driver.table = console_table; console_driver.termios = console_termios; console_driver.termios_locked = console_termios_locked; console_driver.open = con_open; console_driver.write = con_write; console_driver.write_room = con_write_room; console_driver.chars_in_buffer = con_chars_in_buffer; console_driver.ioctl = vt_ioctl; console_driver.stop = con_stop; console_driver.start = con_start; console_driver.throttle = con_throttle; console_driver.unthrottle = con_unthrottle; if (tty_register_driver(&console_driver)) panic("Couldn't register console driver\n"); con_setsize(ORIG_VIDEO_LINES, ORIG_VIDEO_COLS); video_page = ORIG_VIDEO_PAGE; /* never used */ __scrollback_mode = 0 ; timer_table[BLANK_TIMER].fn = blank_screen; timer_table[BLANK_TIMER].expires = 0; if (blankinterval) { timer_table[BLANK_TIMER].expires = jiffies+blankinterval; timer_active |= 1<vc_palette[k++] = default_red[j] ; vc_cons[currcons].d->vc_palette[k++] = default_grn[j] ; vc_cons[currcons].d->vc_palette[k++] = default_blu[j] ; } } currcons = fg_console = 0; video_mem_start = video_mem_base; video_mem_end = video_mem_term; origin = video_mem_start; scr_end = video_mem_start + video_num_lines * video_size_row; gotoxy(currcons,orig_x,orig_y); set_origin(currcons); csi_J(currcons, 0); /* Figure out the size of the screen and screen font so we can figure out the appropriate screen size should we load a different font */ printable = 1; if ( video_type == VIDEO_TYPE_VGAC || video_type == VIDEO_TYPE_EGAC || video_type == VIDEO_TYPE_EGAM ) { video_font_height = ORIG_VIDEO_POINTS; /* This may be suboptimal but is a safe bet - go with it */ video_scan_lines = video_font_height * video_num_lines; printk("Console: %ld point font, %ld scans\n", video_font_height, video_scan_lines); } printk("Console: %s %s %ldx%ld, %d virtual console%s (max %d)\n", can_do_color ? "colour" : "mono", display_desc, video_num_columns,video_num_lines, MIN_NR_CONSOLES, (MIN_NR_CONSOLES == 1) ? "" : "s", MAX_NR_CONSOLES); register_console(console_print); return kmem_start; } static void get_scrmem(int currcons) { memcpyw((unsigned short *)vc_scrbuf[currcons], (unsigned short *)origin, video_screen_size); __scrollback_mode = 0 ; origin = video_mem_start = (unsigned long)vc_scrbuf[currcons]; scr_end = video_mem_end = video_mem_start + video_screen_size; pos = origin + y*video_size_row + (x<<1); } static void set_scrmem(int currcons, long offset) { #ifdef CONFIG_HGA /* This works with XFree86 1.2, 1.3 and 2.0 This code could be extended and made more generally useful if we could determine the actual video mode. It appears that this should be possible on a genuine Hercules card, but I (WM) haven't been able to read from any of the required registers on my clone card. */ /* This code should work with Hercules and MDA cards. */ if (video_type == VIDEO_TYPE_MDA) { if (vcmode == KD_TEXT) { /* Ensure that the card is in text mode. */ int i; static char herc_txt_tbl[12] = { 0x61,0x50,0x52,0x0f,0x19,6,0x19,0x19,2,0x0d,0x0b,0x0c }; outb_p(0, 0x3bf); /* Back to power-on defaults */ outb_p(0, 0x3b8); /* Blank the screen, select page 0, etc */ for ( i = 0 ; i < 12 ; i++ ) { outb_p(i, 0x3b4); outb_p(herc_txt_tbl[i], 0x3b5); } } #define HGA_BLINKER_ON 0x20 #define HGA_SCREEN_ON 8 /* Make sure that the hardware is not blanked */ outb_p(HGA_BLINKER_ON | HGA_SCREEN_ON, 0x3b8); } #endif CONFIG_HGA if (video_mem_term - video_mem_base < offset + video_screen_size) offset = 0; /* strange ... */ memcpyw((unsigned short *)(video_mem_base + offset), (unsigned short *) origin, video_screen_size); video_mem_start = video_mem_base; video_mem_end = video_mem_term; origin = video_mem_base + offset; scr_end = origin + video_screen_size; pos = origin + y*video_size_row + (x<<1); } void do_blank_screen(int nopowersave) { int currcons; if (console_blanked) return; timer_active &= ~(1<device) - tty->driver.minor_start; i = vc_allocate(idx); if (i) return i; vt_cons[idx]->vc_num = idx; tty->driver_data = vt_cons[idx]; if (!tty->winsize.ws_row && !tty->winsize.ws_col) { tty->winsize.ws_row = video_num_lines; tty->winsize.ws_col = video_num_columns; } return 0; } /* * PIO_FONT support. * * The font loading code goes back to the codepage package by * Joel Hoffman (joel@wam.umd.edu). (He reports that the original * reference is: "From: p. 307 of _Programmer's Guide to PC & PS/2 * Video Systems_ by Richard Wilton. 1987. Microsoft Press".) * * Change for certain monochrome monitors by Yury Shevchuck * (sizif@botik.yaroslavl.su). */ #define colourmap ((char *)0xa0000) /* Pauline Middelink reports that we should use 0xA0000 for the bwmap as well.. */ #define blackwmap ((char *)0xa0000) #define cmapsz 8192 #define attrib_port (0x3c0) #define seq_port_reg (0x3c4) #define seq_port_val (0x3c5) #define gr_port_reg (0x3ce) #define gr_port_val (0x3cf) static int set_get_font(char * arg, int set, int ch512) { #ifdef CAN_LOAD_EGA_FONTS int i; char *charmap; int beg; unsigned short video_port_status = video_port_reg + 6; /* no use to "load" CGA... */ if (video_type == VIDEO_TYPE_EGAC || video_type == VIDEO_TYPE_VGAC) { charmap = colourmap; beg = 0x0e; #ifdef VGA_CAN_DO_64KB if (video_type == VIDEO_TYPE_VGAC) beg = 0x06; #endif } else if (video_type == VIDEO_TYPE_EGAM) { charmap = blackwmap; beg = 0x0a; } else return -EINVAL; i = verify_area(set ? VERIFY_READ : VERIFY_WRITE, (void *)arg, ch512 ? 2*cmapsz : cmapsz); if (i) return i; cli(); outb_p( 0x00, seq_port_reg ); /* First, the sequencer */ outb_p( 0x01, seq_port_val ); /* Synchronous reset */ outb_p( 0x02, seq_port_reg ); outb_p( 0x04, seq_port_val ); /* CPU writes only to map 2 */ outb_p( 0x04, seq_port_reg ); outb_p( 0x07, seq_port_val ); /* Sequential addressing */ outb_p( 0x00, seq_port_reg ); outb_p( 0x03, seq_port_val ); /* Clear synchronous reset */ outb_p( 0x04, gr_port_reg ); /* Now, the graphics controller */ outb_p( 0x02, gr_port_val ); /* select map 2 */ outb_p( 0x05, gr_port_reg ); outb_p( 0x00, gr_port_val ); /* disable odd-even addressing */ outb_p( 0x06, gr_port_reg ); outb_p( 0x00, gr_port_val ); /* map start at A000:0000 */ sti(); if (set) for (i=0; ivc_palette[k++] = default_red[j]; vc_cons[i].d->vc_palette[k++] = default_grn[j]; vc_cons[i].d->vc_palette[k++] = default_blu[j]; } } set_palette() ; } return 0; #else return -EINVAL; #endif } /* * Load palette into the EGA/VGA DAC registers. arg points to a colour * map, 3 bytes per colour, 16 colours, range from 0 to 255. */ int con_set_cmap (unsigned char *arg) { return set_get_cmap (arg,1); } int con_get_cmap (unsigned char *arg) { return set_get_cmap (arg,0); } void reset_palette (int currcons) { int j, k ; for (j=k=0; j<16; j++) { palette[k++] = default_red[j]; palette[k++] = default_grn[j]; palette[k++] = default_blu[j]; } set_palette() ; } void set_palette (void) { int i, j ; if (video_type != VIDEO_TYPE_VGAC || console_blanked || vt_cons[fg_console]->vc_mode == KD_GRAPHICS) return ; for (i=j=0; i<16; i++) { outb_p (color_table[i], dac_reg) ; outb_p (vc_cons[fg_console].d->vc_palette[j++]>>2, dac_val) ; outb_p (vc_cons[fg_console].d->vc_palette[j++]>>2, dac_val) ; outb_p (vc_cons[fg_console].d->vc_palette[j++]>>2, dac_val) ; } } /* * Load font into the EGA/VGA character generator. arg points to a 8192 * byte map, 32 bytes per character. Only first H of them are used for * 8xH fonts (0 < H <= 32). */ int con_set_font (char *arg, int ch512) { int i; i = set_get_font (arg,1,ch512); if ( !i ) { hashtable_contents_valid = 0; video_mode_512ch = ch512; console_charmask = ch512 ? 0x1ff : 0x0ff; } return i; } int con_get_font (char *arg) { return set_get_font (arg,0,video_mode_512ch); } /* * Adjust the screen to fit a font of a certain height * * Returns < 0 for error, 0 if nothing changed, and the number * of lines on the adjusted console if changed. */ int con_adjust_height(unsigned long fontheight) { int rows, maxscan; unsigned char ovr, vde, fsr, curs, cure; if (fontheight > 32 || (video_type != VIDEO_TYPE_VGAC && video_type != VIDEO_TYPE_EGAC && video_type != VIDEO_TYPE_EGAM)) return -EINVAL; if ( fontheight == video_font_height || fontheight == 0 ) return 0; video_font_height = fontheight; rows = video_scan_lines/fontheight; /* Number of video rows we end up with */ maxscan = rows*fontheight - 1; /* Scan lines to actually display-1 */ /* Reprogram the CRTC for the new font size Note: the attempt to read the overflow register will fail on an EGA, but using 0xff for the previous value appears to be OK for EGA text modes in the range 257-512 scan lines, so I guess we don't need to worry about it. The same applies for the spill bits in the font size and cursor registers; they are write-only on EGA, but it appears that they are all don't care bits on EGA, so I guess it doesn't matter. */ cli(); outb_p( 0x07, video_port_reg ); /* CRTC overflow register */ ovr = inb_p(video_port_val); outb_p( 0x09, video_port_reg ); /* Font size register */ fsr = inb_p(video_port_val); outb_p( 0x0a, video_port_reg ); /* Cursor start */ curs = inb_p(video_port_val); outb_p( 0x0b, video_port_reg ); /* Cursor end */ cure = inb_p(video_port_val); sti(); vde = maxscan & 0xff; /* Vertical display end reg */ ovr = (ovr & 0xbd) + /* Overflow register */ ((maxscan & 0x100) >> 7) + ((maxscan & 0x200) >> 3); fsr = (fsr & 0xe0) + (fontheight-1); /* Font size register */ curs = (curs & 0xc0) + fontheight - (fontheight < 10 ? 2 : 3); cure = (cure & 0xe0) + fontheight - (fontheight < 10 ? 1 : 2); cli(); outb_p( 0x07, video_port_reg ); /* CRTC overflow register */ outb_p( ovr, video_port_val ); outb_p( 0x09, video_port_reg ); /* Font size */ outb_p( fsr, video_port_val ); outb_p( 0x0a, video_port_reg ); /* Cursor start */ outb_p( curs, video_port_val ); outb_p( 0x0b, video_port_reg ); /* Cursor end */ outb_p( cure, video_port_val ); outb_p( 0x12, video_port_reg ); /* Vertical display limit */ outb_p( vde, video_port_val ); sti(); if ( rows == video_num_lines ) { /* Change didn't affect number of lines -- no need to scare the rest of the world */ return 0; } vc_resize(rows, 0); /* Adjust console size */ return rows; }