       _________________________________________________________________
       STACKER NOTE                                         STACKER NOTE
                       ROM BIOS SUPPORT FOR DBLSPACE.BIN
                  (Applies to Stacker 3.1 for Windows & DOS)
       STAC FAX 31021  (10/05/93)
       _________________________________________________________________
                                       
                                       
       BACKGROUND
       
       Some computers don't support Microsoft's use of interrupt 1AH to
       implement its pre-loading compression driver, although most
       systems that support MS-DOS 6 do.  If you have one of the
       following models, Microsoft indicates that your computer may hang
       up in the startup process:
       
           Sharp models 6700, 6781, 6785, 6800 and 6881
           Cannon C-200 M-50 and C-200 M-55
           Computers using a Microsolutions Compaticard
           Positive Computers
           Snap-On Intel 386 and Intel AboveBoard 2.0
           Some AEG Olympia 386SX Laptops
           Some older ACER machines
           Texas Instruments (TI) Travelmate 2000
           Zeos 80386 with an AMI BIOS dated 09/15/89
        
       SOLUTION
       
       Start your computer from a floppy disk, and add the switch /-LZS
       to your STACKER.INI file.
       
        1. Restart your system with a startup disk.  If you don't
           already have a startup disk, you can use MS-DOS 6.0 Setup
           Disk 1 if it is compatible with drive A, or you can use the
           MS-DOS 6.0 Uninstall disk.
       
        2. Insert Stacker Disk 1 into drive A or B, and change to that
           drive.
       
        3. From the DOS prompt, type:
       
               \TOOLS\STACINI C: <Enter>
       
        4. Add the switch /-LZS to the beginning of the file.  For
           example:
       
               /-LZS
               /DIR=c:\STACKER
               C:\STACVOL.000,NS
               C:\STACVOL.DSK,NS
       
        5. Press Ctrl+Z to save the file.
       
       _________________________________________________________________
       Copyright 1993, Stac Electronics                      
