TITLE: 950117 INSTALLING OS/2 WARP ON A SYSTEM WITH NCR PCI SCSI
              CONTROLLER THAT USED OS2CAM.ADD,  RECEIVED
              C:\OS2\SYSTEM\COUNTRY.SYS ERROR AFTER INSTALLATION.
 
DESCRIPTION OF SYMPTOMS:
 Error after successful installation of WARP:
 " C:\OS2\SYSTEM\COUNTRY.SYS CANNOT BE FOUND "
 
RESOLUTION:
 User's system is as followed:
 A clone 486dx2-66mhz, 16mb, AWARD bios version 4.5, PCI system,
 and a built-in NCR PCI SCSI on the system board.
 It came with an OS/2 driver called OS2CAM.ADD.
 User has added in the config.sys on Disk #1 and was abled to install
 OS/2 thru all the disks, but after reboot, before the desktop, it will
 display the above error msg.
 Check the config.sys and the OS2CAM.ADD is in there but the following
 statement is not in there:
    BASEDEV=OS2SCSI.DMD.
 Do the following:
 Moves the BASEDEV=OS2CAM.ADD after BASEDEV=OS2DASD.DMD.
 Adds the BASEDEV=OS2SCSI.DMD below the OS2CAM.ADD and reboot.
 System will boots up and running OS/2 WARP.
 Please note that this driver is supported only from NCR vendor. It does
 not come with the OS/2 WARP package.