TITLE: 950131 WARP AND OS/2 2.1 SE FOR WINDOWS CANNOT INSTALL ON APTIVA SYSTEMS WHICH ARE PRE-LOADED WITH DOS/WINDOWS DESCRIPTION OF SYMPTOMS: During the installation of WARP and OS/2 2.1 SE for Windows, the user is prompted for WINDOWS diskettes. Aptiva systems which are delivered with DOS/WINDOWS pre-installed have no diskettes with which to finish the installation process. The WIN-OS/2 component is unable to install. SUMMARY OF RESOLUTION: Edit SETUP.INF DETAILS OF RESOLUTION: Three Files are used during installation of Windows which provide information necessary to properly install and maintain the Windows platform. The key file which Windows Setup uses to install the Windows system and it's application files is SETUP.INF (the other two are CONTROL.INF and APPS.INF). SETUP.INF by default, has 13 sections, one of which needs to be edited to enable the WIN-OS/2 component to install. The "DISKS" section describe disks which might be requested during installation and their characteristics. This section needs to be edited as follows to enable WIN-OS/2 support. In the .Disks. section the following statements appear: 1 =. ,"Microsoft Windows 3.1 Disk #1",disk1 2 =. ,"Microsoft Windows 3.1 Disk #2",disk2 3 =. ,"Microsoft Windows 3.1 Disk #3",disk3 4 =. ,"Microsoft Windows 3.1 Disk #4",disk4 5 =. ,"Microsoft Windows 3.1 Disk #5",disk5 6 =. ,"Microsoft Windows 3.1 Disk #6",disk6 Edit these statements so they appear as follows 1 =X:\windows\drivers,"Microsoft Windows 3.1 Disk #1",disk1 2 =X:\windows\drivers,"Microsoft Windows 3.1 Disk #2",disk2 3 =X:\windows\drivers,"Microsoft Windows 3.1 Disk #3",disk3 4 =X:\windows\drivers,"Microsoft Windows 3.1 Disk #4",disk4 5 =X:\windows\drivers,"Microsoft Windows 3.1 Disk #5",disk5 6 =X:\windows\drivers,"Microsoft Windows 3.1 Disk #6",disk6 where X= the drive where Windows is installed. This change should be in place before installation, but can be made after to use with the SELECTIVE INSTALL feature