**********************  IBM Unclassified Use  **************************
* :nick.WFP_01     :sec.IBM Unclassified Use          :disk.PSPDIST
* :title.WARP FixPak 01, COMM Fix for THINKPAD 720's (APAR PJ15906)
* :version.1.0     :date.94/12/01   :summary.PACKAGE  :support.N
* :oname.Irv Spalten ** = ** Boca E :onode.BCRVM1     :ouser.IRV
* :aname.Irv Spalten ** = ** Boca E :anode.BCRVM1     :auser.IRV
* :hw.ThinkPad 720
* :ops.OS/2 WARP
* :abs.*
*********** OS/2 FIXPAK FOR OS/2 Warp Version 3.0 ***********
*
*                             IMPORTANT
*
*  PLEASE READ THE FOLLOWING TERMS AND CONDITIONS. DOWNLOADING
*  THE SERVICE FIX THAT FOLLOWS, INDICATES YOUR ACCEPTANCE OF
*  THE FOLLOWING TERMS AND CONDITIONS:
*
*  - YOU MUST BE, AND YOU AGREE THAT YOU ARE, A PRIOR LICENSEE
*    OF OS/2 WARP VERSION 3.0
*  - YOU MAY MAKE COPIES OF THE OS/2 WARP VERSION 3.0 SERVICE
*    FIX EQUAL TO THE NUMBER OF LICENSED COPIES OF OS/2 WARP
*    VERSION 3.0 YOU POSSESS
*  - YOU MAY ONLY USE THIS SERVICE FIX FOR MAINTENANCE PUR-
*    POSES
*  - ALL OTHER TERMS AND CONDITIONS OF YOUR OS/2 WARP VERSION
*    3.0 LICENSE AGREEMENT APPLY TO THIS SERVICE FIX; HOWEVER,
*    THIS DOES NOT EXTEND ANY WARRANTY OUTLINED IN SUCH
*    AGREEMENT.
*
* *************************************************************
* Note: You will need the OS/2 Warp FixPak installation disks
*       - WARPBDSK #1 and WARPBDSK #2 - to install this FixPak.
*       - The ABOVE files are included in WKICKR PACKAGE.
*         Since ALL FixPaks for WARP need the WKICKR PACAGE, I have
*         NOT included it here to save duplicate transmissions of files.
* *************************************************************
*
* ***************************************
* OS/2 WARP FIXPAK              = XR_WPK1
* CORRECTIVE SERVICE LEVEL(CSD) = XR03000
* ***************************************
* AFFECTED MODULE(s):
* ***************************************
* COM.SYS
*
* ***************************************
* APAR(s) FIXED:
* ***************************************
* APAR= PJ15906
* CUSTOMER IS UNABLE TO ACCESS PCMCIA MODEM ON AN IBM THINKPAD 720
* (THE MODE COMMAND RETURNS AN ERROR).
*
*
* Note: Some fixed APARs may NOT be listed above. If you received this
*       FixPak through the IBM OS/2 support channel and your requested
*       APAR(s) is/are NOT listed, please install this FixPak, your
*       requested APAR(s) is/are included.
* *************************************************************************
*
* *************************************************************************
*
* To INSTALL this fix perform the following steps :
*
* 1. Insert WARPBDSK #1 in drive A
*
* 2. Open an OS/2 window or Full Screen
*
* 3. [C:\]Enter a:\service ; press the enter key
*
* 4. Follow displayed instructions
*
* Note: When prompted, do the following for ARCHIVE specification:
*
* 5. Enter the path where a copy of replaced module(s) will be stored
*    in the ARCHIVE directory. Ex. D:\ARCHIVE.
*
* 6. Click on "OK"
*
* Note: A "Reboot" could be required at this point. If so, follow instructions
*       displayed. If a "Reboot" is NOT required, then do;
*
* 7. Select NO for redisplay of "Product List" when displayed
*
* 8. Close the CSF window
*
* 9. Shut down and reboot your system.
* ***********************************************************************
*
* Note 1: To view the Corrective Service Facility documentation do:
*
* 1. Insert WARPBDSK #1 in drive A
*
* 2. [C:\]Enter E a:readme.csf
*
* Note 2: To print the Corrective Service Facility documentation do:
*
* 1. Insert diskette #1 in drive A
*
* 2. [C:\]Enter print a:readme.csf
************************************************************************
*
* Special Instructions for Marketing Reps, SEs and Field Support:
*
* The files contained in this package may be distributed to
* IBM customers who are already licensed owners of OS/2 Version 2.x or
* 3.x, or by IBM marketing/service personnel authorized to service that
* customer.
*
************************************************************************
      WFP_01   ZIPBIN   *