# Copyright (C) 1989, 1992, 1993 Aladdin Enterprises. All rights reserved. # # This file is part of Ghostscript. # # Ghostscript is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY. No author or distributor accepts responsibility # to anyone for the consequences of using it or for whether it serves any # particular purpose or works at all, unless he says so in writing. Refer # to the Ghostscript General Public License for full details. # # Everyone is granted permission to copy, modify and redistribute # Ghostscript, but only under the conditions described in the Ghostscript # General Public License. A copy of this license is supposed to have been # given to you along with Ghostscript so you can know your rights and # responsibilities. It should be in a file named COPYING. Among other # things, the copyright notice and this notice must be preserved on all # copies. # makefile for Ghostscript device drivers. # -------------------------------- Catalog ------------------------------- # # It is possible to build Ghostscript with an arbitrary collection of # device drivers, although some drivers are supported only on a subset # of the target platforms. The currently available drivers are: # Displays: # MS-DOS EGA and VGA: # ega EGA (640x350, 16-color) # vga VGA (640x480, 16-color) # MS-DOS SuperVGA: # + atiw ATI Wonder SuperVGA, 256-color modes # + atiw16 ATI Wonder SuperVGA in 800x600, 16-color mode # s3vga SuperVGA with S3 86C911 chip (e.g., Diamond Stealth board) # tseng SuperVGA using Tseng Labs ET3000/4000 chips, 256-color modes # tseng16 Tseng Labs SuperVGA in 800x600, 16-color mode (256K memory) # + tvga Trident SuperVGA, 256-color modes # + tvga16 Trident SuperVGA in 800x600, 16-color mode (256K memory) # ****** NOTE: The vesa device does not work with the Watcom (32-bit MS-DOS) # ****** compiler or executable. # vesa SuperVGA with VESA standard API driver # MS-DOS other: # bgi Borland Graphics Interface (CGA) [MS-DOS only] # * herc Hercules Graphics display [MS-DOS only] # mswin Microsoft Windows 3.0, 3.1 [MS Windows only] # mswinprn Microsoft Windows 3.0, 3.1 printer [MS Windows only] # * pe Private Eye display # OS/2: # os2pm OS/2 Presentation Manager # Unix and VMS: # ****** NOTE: For direct frame buffer addressing under SCO Unix or Xenix, # ****** edit the definition of EGAVGA below. # * att3b1 AT&T 3b1/Unixpc monochrome display [3b1 only] # * sonyfb Sony Microsystems monochrome display [Sony only] # * sunview SunView window system [SunOS only] # x11 X Windows version 11, release >=4 [Unix and VMS only] # Printers: # * appledmp Apple Dot Matrix Printer (should also work with Imagewriter) # bj10e Canon BubbleJet BJ10e # * bj200 Canon BubbleJet BJ200 # * cdeskjet H-P DeskJet 500C with 1 bit/pixel color # * cdjcolor H-P DeskJet 500C with 24 bit/pixel color and # high-quality color (Floyd-Steinberg) dithering # * cdjmono H-P DeskJet 500C printing black only # * cdj500 H-P DeskJet 500C (same as cdjcolor) # * cdj550 H-P DeskJet 550C # * declj250 alternate DEC LJ250 driver # + deskjet H-P DeskJet and DeskJet Plus # * dfaxhigh DigiBoard, Inc.'s DigiFAX software format (high resolution) # * dfaxlow DigiFAX low (normal) resolution # djet500 H-P DeskJet 500 # * djet500c H-P DeskJet 500C # epson Epson-compatible dot matrix printers (9- or 24-pin) # + eps9high Epson-compatible 9-pin, interleaved lines # (triple resolution) # * epsonc Epson LQ-2550 and Fujitsu 3400/2400/1200 color printers # * escp2 Epson ESC/P 2 language printers, including Stylus 800 # + ibmpro IBM 9-pin Proprinter # * jetp3852 IBM Jetprinter ink-jet color printer (Model #3852) # + laserjet H-P LaserJet # * la50 DEC LA50 printer # * la75 DEC LA75 printer # * lbp8 Canon LBP-8II laser printer # * ln03 DEC LN03 printer # * lj250 DEC LJ250 Companion color printer # + ljet2p H-P LaserJet IId/IIp/III* with TIFF compression # + ljet3 H-P LaserJet III* with Delta Row compression # + ljet4 H-P LaserJet 4 (defaults to 600 dpi) # + ljetplus H-P LaserJet Plus # * m8510 C.Itoh M8510 printer # * necp6 NEC P6/P6+/P60 printers at 360 x 360 DPI resolution # * nwp533 Sony Microsystems NWP533 laser printer [Sony only] # * oki182 Okidata MicroLine 182 # paintjet H-P PaintJet color printer # * pj alternate PaintJet XL driver # * pjxl H-P PaintJet XL color printer # * pjxl300 H-P PaintJet XL300 color printer # * r4081 Ricoh 4081 laser printer # * sparc SPARCprinter # * t4693d2 Tektronix 4693d color printer, 2 bits per R/G/B component # * t4693d4 Tektronix 4693d color printer, 4 bits per R/G/B component # * t4693d8 Tektronix 4693d color printer, 8 bits per R/G/B component # * tek4696 Tektronix 4695/4696 inkjet plotter # * trufax TruFax facsimile driver [Unix only] # File formats and others: # bit A plain "bit bucket" device # bmpmono Monochrome MS Windows .BMP file format # bmp16 4-bit (EGA/VGA) .BMP file format # bmp256 8-bit (256-color) .BMP file format # bmp16m 24-bit .BMP file format # gifmono Monochrome GIF file format # gif8 8-bit color GIF file format # pcxmono Monochrome PCX file format # pcxgray 8-bit gray scale PCX file format # pcx16 Older color PCX file format (EGA/VGA, 16-color) # pcx256 Newer color PCX file format (256-color) # pbm Portable Bitmap (plain format) # pbmraw Portable Bitmap (raw format) # pgm Portable Graymap (plain format) # pgmraw Portable Graymap (raw format) # ppm Portable Pixmap (plain format) # ppmraw Portable Pixmap (raw format) # * tiffg3 TIFF/F (G3 fax) # User-contributed drivers marked with * require hardware or software # that is not available to Aladdin Enterprises. Please contact the # original contributors, not Aladdin Enterprises, if you have questions. # Contact information appears in the driver entry below. # # Drivers marked with a + are maintained by Aladdin Enterprises with # the assistance of users, since Aladdin Enterprises doesn't have access to # the hardware for these either. # If you add drivers, it would be nice if you kept each list # in alphabetical order. # Each platform-specific makefile contains a line of the form # DEVICE_DEVS=.dev ... .dev # where dev1 ... devn are the devices to be included in the build. # You may edit this line to select any desired set of devices. # dev1 will be used as the default device (unless overridden from # the command line with -sDEVICE=xxx, of course.) If you can't fit all the # devices on a single line, you may add lines defining # DEVICE_DEVS2=.dev ... .dev # DEVICE_DEVS3=.dev ... .dev # etc. up to DEVICE_DEVS9. # Don't use continuation lines, since this may break the MS-DOS command # processor. # ---------------------------- End of catalog ---------------------------- # # If you want to add a new device driver, the examples below should be # enough of a guide to the correct form for the makefile rules. # All device drivers depend on the following: GDEV=$(AK) echogs$(XE) $(gserrors_h) $(gx_h) $(gxdevice_h) # Define the header files for device drivers. Every header file used by # more than one device driver must be listed here. gdevpccm_h=gdevpccm.h gdevpcfb_h=gdevpcfb.h $(dos__h) gdevpcl_h=gdevpcl.h gdevsvga_h=gdevsvga.h gdevx_h=gdevx.h ###### ------------------- MS-DOS display devices ------------------- ###### # There are really only three drivers: an EGA/VGA driver (4 bit-planes, # plane-addressed), a SuperVGA driver (8 bit-planes, byte addressed), # and a special driver for the S3 chip. # To make A4 paper the default, change the compilation line from # $(CCD) ... # to # $(CCD) -DA4 ### ----------------------- EGA and VGA displays ----------------------- ### gdevegaa.$(OBJ): gdevegaa.asm ETEST=ega.$(OBJ) $(ega_) gdevpcfb.$(OBJ) gdevegaa.$(OBJ) ega.exe: $(ETEST) libc$(MM).tr $(COMPDIR)\tlink $(LCT) $(LO) $(LIBDIR)\c0$(MM) @ega.tr @libc$(MM).tr ega.$(OBJ): ega.c $(GDEV) $(CCC) -v ega.c # The shared MS-DOS makefile defines PCFBASM as either gdevegaa.$(OBJ) # or an empty string. # NOTE: for direct frame buffer addressing under SCO Unix or Xenix, # change gdevevga to gdevsco in the following line. EGAVGA=gdevevga.$(OBJ) gdevpcfb.$(OBJ) $(PCFBASM) gdevevga.$(OBJ): gdevevga.c $(GDEV) $(gdevpcfb_h) $(CCD) gdevevga.c gdevsco.$(OBJ): gdevsco.c $(GDEV) $(gdevpcfb_h) $(CCD) gdevsco.c # Common code for MS-DOS and SCO. gdevpcfb.$(OBJ): gdevpcfb.c $(GDEV) $(MAKEFILE) $(gdevpcfb_h) $(CCD) -DUSE_ASM=0$(USE_ASM) gdevpcfb.c # The EGA/VGA family includes: EGA, VGA, and # the ATI Wonder, Tseng ET3000/4000, and Trident SuperVGA in 16-color mode. ega.dev: $(EGAVGA) $(SHP)gssetdev ega $(EGAVGA) vga.dev: $(EGAVGA) $(SHP)gssetdev vga $(EGAVGA) atiw16.dev: $(EGAVGA) $(SHP)gssetdev atiw16 $(EGAVGA) tseng16.dev: $(EGAVGA) $(SHP)gssetdev tseng16 $(EGAVGA) tvga16.dev: $(EGAVGA) $(SHP)gssetdev tvga16 $(EGAVGA) ### ------------------------- SuperVGA displays ------------------------ ### SVGA=gdevsvga.$(OBJ) $(PCFBASM) gdevsvga.$(OBJ): gdevsvga.c $(GDEV) $(MAKEFILE) \ $(gdevpcfb_h) $(gdevsvga_h) $(CCD) -DUSE_ASM=0$(USE_ASM) gdevsvga.c # The SuperVGA family includes: ATI Wonder, S3, Trident, Tseng ET3000/4000, # and VESA. atiw.dev: $(SVGA) $(SHP)gssetdev atiw $(SVGA) tseng.dev: $(SVGA) $(SHP)gssetdev tseng $(SVGA) tvga.dev: $(SVGA) $(SHP)gssetdev tvga $(SVGA) vesa.dev: $(SVGA) $(SHP)gssetdev vesa $(SVGA) # The S3 driver doesn't share much code with the others. s3vga_=$(SVGA) gdevs3ga.$(OBJ) s3vga.dev: $(s3vga_) $(SHP)gssetdev s3vga $(s3vga_) gdevs3ga.$(OBJ): gdevs3ga.c $(GDEV) $(MAKEFILE) $(gdevpcfb_h) $(gdevsvga_h) $(CCD) gdevs3ga.c ### ------------ The BGI (Borland Graphics Interface) device ----------- ### cgaf.$(OBJ): $(BGIDIR)\cga.bgi $(BGIDIR)\bgiobj /F $(BGIDIR)\cga egavgaf.$(OBJ): $(BGIDIR)\egavga.bgi $(BGIDIR)\bgiobj /F $(BGIDIR)\egavga # Include egavgaf.$(OBJ) for debugging only. bgi_=gdevbgi.$(OBJ) cgaf.$(OBJ) bgi.dev: $(bgi_) $(SHP)gssetdev bgi $(bgi_) $(SHP)gsaddmod bgi -lib $(LIBDIR)\graphics gdevbgi.$(OBJ): gdevbgi.c $(GDEV) $(MAKEFILE) $(gxxfont_h) $(CCC) -DBGI_LIB=$(QQ)$(BGIDIRSTR)$(QQ) gdevbgi.c ### ------------------- The Hercules Graphics display ------------------- ### herc_=gdevherc.$(OBJ) herc.dev: $(herc_) $(SHP)gssetdev herc $(herc_) gdevherc.$(OBJ): gdevherc.c $(GDEV) $(CCC) gdevherc.c ###### ------------------- The Private Eye display ------------------- ###### ### Note: this driver was contributed by a user: ### ### please contact narf@media-lab.media.mit.edu if you have questions. ### pe_=gdevpe.$(OBJ) pe.dev: $(pe_) $(SHP)gssetdev pe $(pe_) gdevpe.$(OBJ): gdevpe.c $(GDEV) ###### ----------------- The MS-Windows 3.n display ------------------ ###### gdevmswn_h=gdevmswn.h $(GDEV) gp_mswin.h # Choose one of gdevwddb or gdevwdib here. mswin_=gdevmswn.$(OBJ) gdevmsxf.$(OBJ) gdevwdib.$(OBJ) \ gdevemap.$(OBJ) gdevpccm.$(OBJ) mswin.dev: $(mswin_) $(SHP)gssetdev mswin $(mswin_) gdevmswn.$(OBJ): gdevmswn.c $(gdevmswn_h) $(gp_h) $(gpcheck_h) \ $(gsprops_h) $(gdevpccm_h) gdevmsxf.$(OBJ): gdevmsxf.c $(ctype__h) $(math__h) $(memory__h) \ $(gdevmswn_h) $(gsutil_h) $(gxxfont_h) # An implementation using a device-dependent bitmap. gdevwddb.$(OBJ): gdevwddb.c $(gdevmswn_h) # An implementation using a DIB filled by an image device. gdevwdib.$(OBJ): gdevwdib.c $(dos__h) $(gdevmswn_h) ###### ----------------- The MS-Windows 3.n printer ------------------ ###### mswinprn_=gdevwprn.$(OBJ) gdevmsxf.$(OBJ) mswinprn.dev: $(mswinprn_) $(SHP)gssetdev mswinprn $(mswinprn_) gdevwprn.$(OBJ): gdevwprn.c $(gdevmswn_h) $(gp_h) $(gpcheck_h) \ $(gsprops_h) $(gdevpccm_h) ###### --------------- OS/2 Presentation Manager device -------------- ###### # Choose one of gdevwddb or gdevwdib here. os2pm_=gdevpm.$(OBJ) gdevpccm.$(OBJ) os2pm.dev: $(os2pm_) $(SHP)gssetdev os2pm $(os2pm_) gdevpm.$(OBJ): gdevpm.c $(gp_h) $(gpcheck_h) \ $(gsprops_h) $(gdevpccm_h) ###### ----------- The AT&T 3b1 Unixpc monochrome display ------------ ###### ### Note: this driver was contributed by a user: please contact ### ### Andy Fyfe (andy@cs.caltech.edu) if you have questions. ### att3b1_=gdev3b1.$(OBJ) att3b1.dev: $(att3b1_) $(SHP)gssetdev att3b1 $(att3b1_) gdev3b1.$(OBJ): gdev3b1.c ###### --------------- Memory-buffered printer devices --------------- ###### # The dependency list for printers includes devs.mak because # you can specify -DA4 to make A4 paper the default. # See below under, e.g., gdevdjet.c. PDEVH=$(GDEV) $(gdevprn_h) devs.mak gdevprn.$(OBJ): gdevprn.c $(PDEVH) $(gp_h) $(gsprops_h) ### ------------------- The Apple DMP printer device ------------------- ### appledmp_=gdevadmp.$(OBJ) gdevprn.$(OBJ) appledmp.dev: $(appledmp_) $(SHP)gssetdev appledmp $(appledmp_) ### ------------ The Canon BubbleJet BJ10e and BJ200 devices ------------ ### bj10e_=gdevbj10.$(OBJ) gdevprn.$(OBJ) bj10e.dev: $(bj10e_) $(SHP)gssetdev bj10e $(bj10e_) bj200.dev: $(bj10e_) $(SHP)gssetdev bj200 $(bj10e_) gdevbj10.$(OBJ): gdevbj10.c $(PDEVH) ### -------------------------- The DigiFAX device ----------------------- ### ### This driver outputs images in a format suitable for use with ### ### DigiBoard, Inc.'s DigiFAX software. Use -sDEVICE=dfaxhigh for ### ### high resolution output, -sDEVICE=dfaxlow for normal output. ### ### Note: this driver was contributed by a user: please contact ### ### Rick Richardson (rick@digibd.com) if you have questions. ### digifax_=gdevdfax.$(OBJ) gdevprn.$(OBJ) dfaxhigh.dev: $(digifax_) $(SHP)gssetdev dfaxhigh $(digifax_) dfaxlow.dev: $(digifax_) $(SHP)gssetdev dfaxlow $(digifax_) gdevdfax.$(OBJ): gdevdfax.c $(GDEV) $(gdevprn_h) gdevdfg3.h ### ----------- The H-P DeskJet and LaserJet printer devices ----------- ### ### These are essentially the same device. ### You can make A4 paper the default: see below. ### NOTE: printing at full resolution (300 DPI) requires a printer ### with at least 1.5 Mb of memory. 150 DPI only requires .5 Mb. HPPCL=gdevprn.$(OBJ) gdevpcl.$(OBJ) HPMONO=gdevdjet.$(OBJ) $(HPPCL) gdevpcl.$(OBJ): gdevpcl.c $(PDEVH) $(gdevpcl_h) # To make A4 paper the default, change the second line below this to # $(CCC) -DA4 gdevdjet.c gdevdjet.$(OBJ): gdevdjet.c $(PDEVH) $(gdevpcl_h) $(CCC) gdevdjet.c deskjet.dev: $(HPMONO) $(SHP)gssetdev deskjet $(HPMONO) djet500.dev: $(HPMONO) $(SHP)gssetdev djet500 $(HPMONO) laserjet.dev: $(HPMONO) $(SHP)gssetdev laserjet $(HPMONO) ljetplus.dev: $(HPMONO) $(SHP)gssetdev ljetplus $(HPMONO) ### Selecting ljet2p provides TIFF (mode 2) compression on LaserJet III, ### IIIp, IIId, IIIsi, IId, and IIp. ljet2p.dev: $(HPMONO) $(SHP)gssetdev ljet2p $(HPMONO) ### Selecting ljet3 provides Delta Row (mode 3) compression on LaserJet III, ### IIIp, IIId, IIIsi. ljet3.dev: $(HPMONO) $(SHP)gssetdev ljet3 $(HPMONO) ### Selecting ljet4 also provides Delta Row compression on LaserJet IV series. ljet4.dev: $(HPMONO) $(SHP)gssetdev ljet4 $(HPMONO) ###- The H-P DeskJet 500C/550C and PaintJet family color printer devices -### ### Note: there are two different 500C drivers, both contributed by users.### ### If you have questions about the djet500c driver, ### ### please contact AKayser@et.tudelft.nl. ### ### If you have questions about the cdj* drivers, ### ### please contact g.cameron@biomed.abdn.ac.uk. ### cdeskjet_=gdevcdj.$(OBJ) $(HPPCL) cdeskjet.dev: $(cdeskjet_) $(SHP)gssetdev cdeskjet $(cdeskjet_) cdjcolor.dev: $(cdeskjet_) $(SHP)gssetdev cdjcolor $(cdeskjet_) cdjmono.dev: $(cdeskjet_) $(SHP)gssetdev cdjmono $(cdeskjet_) cdj500.dev: $(cdeskjet_) $(SHP)gssetdev cdj500 $(cdeskjet_) cdj550.dev: $(cdeskjet_) $(SHP)gssetdev cdj550 $(cdeskjet_) declj250.dev: $(cdeskjet_) $(SHP)gssetdev declj250 $(cdeskjet_) pj.dev: $(cdeskjet_) $(SHP)gssetdev pj $(cdeskjet_) pjxl.dev: $(cdeskjet_) $(SHP)gssetdev pjxl $(cdeskjet_) pjxl300.dev: $(cdeskjet_) $(SHP)gssetdev pjxl300 $(cdeskjet_) # NB: you can also customise the build if required, using -DA4 (for A4 paper) # and -DBitsPerPixel= if you wish the default to be other than 24 # for the generic drivers (cdj500, cdj550, pjxl300, pjtest, pjxltest). # E.g,. to make A4 paper the default, change the second line below this to # $(CCC) -DA4 gdevdjet.c gdevcdj.$(OBJ): gdevcdj.c $(PDEVH) $(gdevpcl_h) $(CCC) gdevcdj.c djet500c_=gdevdjtc.$(OBJ) $(HPPCL) djet500c.dev: $(djet500c_) $(SHP)gssetdev djet500c $(djet500c_) gdevdjtc.$(OBJ): gdevdjtc.c $(PDEVH) $(gdevpcl_h) ### ----------------- The generic Epson printer device ----------------- ### epson_=gdevepsn.$(OBJ) gdevprn.$(OBJ) epson.dev: $(epson_) $(SHP)gssetdev epson $(epson_) eps9high.dev: $(epson_) $(SHP)gssetdev eps9high $(epson_) gdevepsn.$(OBJ): gdevepsn.c $(PDEVH) ### ----------------- The IBM Proprinter printer device ---------------- ### ibmpro.dev: $(epson_) $(SHP)gssetdev ibmpro $(epson_) ### -------------- The Epson LQ-2550 color printer device -------------- ### ### Note: this driver was contributed by users: please contact ### ### Dave St. Clair (dave@exlog.com) if you have questions. ### epsonc_=gdevepsc.$(OBJ) gdevprn.$(OBJ) epsonc.dev: $(epsonc_) $(SHP)gssetdev epsonc $(epsonc_) gdevepsc.$(OBJ): gdevepsc.c $(PDEVH) ### -------------- The Epson ESC/P 2 language printer device ----------- ### ### Note: this driver was contributed by a user: if you have questions, ### ### please contact Richard Brown (rab@tauon.ph.unimelb.edu.au). ### escp2_=gdevescp.$(OBJ) gdevprn.$(OBJ) escp2.dev: $(escp2_) $(SHP)gssetdev escp2 $(escp2_) gdevescp.$(OBJ): gdevescp.c $(PDEVH) ### ------------ The H-P PaintJet color printer device ----------------- ### ### Note: this driver also supports the DEC LJ250 color printer, which ### ### has a PaintJet-compatible mode, and the PaintJet XL. ### ### If you have questions about the XL, please contact Rob Reiss ### ### (rob@moray.berkeley.edu). ### PJET=gdevpjet.$(OBJ) $(HPPCL) gdevpjet.$(OBJ): gdevpjet.c $(PDEVH) $(gdevpcl_h) lj250.dev: $(PJET) $(SHP)gssetdev lj250 $(PJET) paintjet.dev: $(PJET) $(SHP)gssetdev paintjet $(PJET) pjetxl.dev: $(PJET) $(SHP)gssetdev pjetxl $(PJET) ### ------- The IBM 3852 JetPrinter color inkjet printer device -------- ### ### Note: this driver was contributed by users: please contact ### ### Kevin Gift (kgift@draper.com) if you have questions. ### ### Note that the paper size that can be addressed by the graphics mode ### ### used in this driver is fixed at 7-1/2 inches wide (the printable ### ### width of the jetprinter itself.) ### jetp3852_=gdev3852.$(OBJ) gdevprn.$(OBJ) jetp3852.dev: $(jetp3852_) $(SHP)gssetdev jetp3852 $(jetp3852_) gdevjetp.$(OBJ): gdevjetp.c $(PDEVH) $(gdevpcl_h) ### ----------------- The Canon LBP-8II printer device ----------------- ### ### Note: this driver was contributed by users: please contact ### ### Tom Quinn (trq@prg.oxford.ac.uk) if you have questions. ### ### Note that the standard paper size for this driver is the European ### ### A4 size, not the American 8.5" x 11" size. ### lbp8_=gdevlbp8.$(OBJ) gdevprn.$(OBJ) lbp8.dev: $(lbp8_) $(SHP)gssetdev lbp8 $(lbp8_) gdevlbp8.$(OBJ): gdevlbp8.c $(PDEVH) ### -------------- The DEC LN03/LA50/LA75 printer devices -------------- ### ### Note: this driver was contributed by users: please contact ### ### Ulrich Mueller (ulm@vsnhd1.cern.ch) if you have questions. ### ### For questions about LA50 and LA75: please contact ### ### Ian MacPhedran (macphed@dvinci.USask.CA). ### ### For the LN03, you can make A4 paper the default: see below. ### ln03_=gdevln03.$(OBJ) gdevprn.$(OBJ) ln03.dev: $(ln03_) $(SHP)gssetdev ln03 $(ln03_) la50.dev: $(ln03_) $(SHP)gssetdev la50 $(ln03_) la75.dev: $(ln03_) $(SHP)gssetdev la75 $(ln03_) # To make A4 paper the default, change the second line below this to # $(CCC) -DA4 gdevln03.c gdevln03.$(OBJ): gdevln03.c $(PDEVH) $(CCC) gdevln03.c ### -------------- The C.Itoh M8510 printer device --------------------- ### ### Note: this driver was contributed by a user: please contact Bob ### ### Smith if you have questions. ### m8510_=gdev8510.$(OBJ) gdevprn.$(OBJ) m8510.dev: $(m8510_) $(SHP)gssetdev m8510 $(m8510_) gdev8510.$(OBJ): gdev8510.c $(PDEVH) ### --------------------- The NEC P6 family devices -------------------- ### necp6_=gdevnp6.$(OBJ) gdevprn.$(OBJ) necp6.dev: $(necp6_) $(SHP)gssetdev necp6 $(necp6_) gdevnp6.$(OBJ): gdevnp6.c $(PDEVH) ### ----------------- The Okidata MicroLine 182 device ----------------- ### ### Note: this driver was contributed by a user: please contact ### ### Maarten Koning (smeg@bnr.ca) if you have questions. ### oki182_=gdevo182.$(OBJ) gdevprn.$(OBJ) oki182.dev: $(oki182_) $(SHP)gssetdev oki182 $(oki182_) gdevo182.$(OBJ): gdevo182.c $(PDEVH) ### ------------- The Ricoh 4081 laser printer device ------------------ ### ### Note: this driver was contributed by users: ### ### please contact kdw@oasis.icl.co.uk if you have questions. ### r4081_=gdev4081.$(OBJ) gdevprn.$(OBJ) r4081.dev: $(r4081_) $(SHP)gssetdev r4081 $(r4081_) gdev4081.$(OBJ): gdev4081.c $(PDEVH) ###### ------------------------ Sony devices ------------------------ ###### ### Note: these drivers were contributed by users: please contact ### ### Mike Smolenski (mike@intertech.com) if you have questions. ### ### ------------------- Sony NeWS frame buffer device ------------------ ### sonyfb_=gdevsnfb.$(OBJ) gdevprn.$(OBJ) sonyfb.dev: $(sonyfb_) $(SHP)gssetdev sonyfb $(sonyfb_) gdevsnfb.$(OBJ): gdevsnfb.c $(PDEVH) ### -------------------- Sony NWP533 printer device -------------------- ### ### Note: this driver was contributed by a user: please contact Tero ### ### Kivinen (kivinen@joker.cs.hut.fi) if you have questions. ### nwp533_=gdevn533.$(OBJ) gdevprn.$(OBJ) nwp533.dev: $(nwp533_) $(SHP)gssetdev nwp533 $(nwp533_) gdevn533.$(OBJ): gdevn533.c $(PDEVH) ### ------------------------- The SPARCprinter ------------------------- ### ### Note: this driver was contributed by users: please contact Martin ### ### Schulte (schulte@thp.uni-koeln.de) if you have questions. ### ### He would also like to hear from anyone using the driver. ### ### Please consult the source code for additional documentation. ### sparc_=gdevsppr.$(OBJ) gdevprn.$(OBJ) sparc.dev: $(sparc_) $(SHP)gssetdev sparc $(sparc_) gdevsppr.$(OBJ): gdevsppr.c $(PDEVH) ###### --------------------- The SunView device --------------------- ###### ### Note: this driver is maintained by a user: if you have questions, ### ### please contact Andreas Stolcke (stolcke@icsi.berkeley.edu). ### sunview_=gdevsun.$(OBJ) sunview.dev: $(sunview_) $(SHP)gssetdev sunview $(sunview_) $(SHP)gsaddmod sunview -lib suntool sunwindow pixrect gdevsun.$(OBJ): gdevsun.c $(GDEV) $(arch_h) ### ----------------- Tektronix 4396d color printer -------------------- ### ### Note: this driver was contributed by a user: please contact ### ### Karl Hakimian (hakimian@haney.eecs.wsu.edu) ### ### if you have questions. ### t4693d_=gdev4693.$(OBJ) gdevprn.$(OBJ) t4693d2.dev: $(t4693d_) $(SHP)gssetdev t4693d2 $(t4693d_) t4693d4.dev: $(t4693d_) $(SHP)gssetdev t4693d4 $(t4693d_) t4693d8.dev: $(t4693d_) $(SHP)gssetdev t4693d8 $(t4693d_) gdev4693.$(OBJ): gdev4693.c $(GDEV) ### -------------------- Tektronix ink-jet printers -------------------- ### ### Note: this driver was contributed by a user: please contact ### ### Karsten Spang (spang@nbivax.nbi.dk) if you have questions. ### tek4696_=gdevtknk.$(OBJ) gdevprn.$(OBJ) tek4696.dev: $(tek4696_) $(SHP)gssetdev tek4696 $(tek4696_) gdevtknk.$(OBJ): gdevtknk.c $(PDEVH) ### ----------------- The TruFax facsimile device ---------------------- ### ### Note: this driver was contributed by users: please contact ### ### Neil Ostroff (nao@maestro.bellcore.com) if you have questions. ### ### Note that the driver requires a file encode_l.o supplied by the ### ### makers of the TruFax product. ### trufax_=gdevtrfx.$(OBJ) gdevprn.$(OBJ) encode_l.$(OBJ) trufax.dev: $(trufax_) $(SHP)gssetdev trufax $(trufax_) gdevtrfx.$(OBJ): gdevtrfx.c $(GDEV) ###### ----------------------- The X11 device ----------------------- ###### # Aladdin Enterprises does not support Ghostview. For more information # about Ghostview, please contact Tim Theisen (ghostview@cs.wisc.edu). x11_=gdevx.$(OBJ) gdevxini.$(OBJ) gdevxxf.$(OBJ) gdevemap.$(OBJ) x11.dev: $(x11_) $(SHP)gssetdev x11 $(x11_) $(SHP)gsaddmod x11 -lib Xt X11 Xext # See the main makefile for the definition of XINCLUDE. GDEVX=$(GDEV) x_.h gdevx.h $(MAKEFILE) gdevx.$(OBJ): gdevx.c $(GDEVX) $(gsprops_h) $(gsutil_h) $(CCC) $(XINCLUDE) gdevx.c gdevxini.$(OBJ): gdevxini.c $(GDEVX) $(ctype__h) $(CCC) $(XINCLUDE) gdevxini.c gdevxxf.$(OBJ): gdevxxf.c $(GDEVX) $(gsutil_h) $(gxxfont_h) $(CCC) $(XINCLUDE) gdevxxf.c ### ---------------------- The bit bucket device ----------------------- ### bit_=gdevbit.$(OBJ) gdevprn.$(OBJ) bit.dev: $(bit_) $(SHP)gssetdev bit $(bit_) gdevbit.$(OBJ): gdevbit.c $(PDEVH) ###### ----------------------- PC file formats ---------------------- ###### gdevpccm.$(OBJ): gdevpccm.c $(AK) \ $(gs_h) $(gsmatrix_h) $(gxdevice_h) $(gdevpccm_h) ### ------------------------- .BMP file formats ------------------------- ### bmp_=gdevbmp.$(OBJ) gdevpccm.$(OBJ) gdevprn.$(OBJ) gdevbmp.$(OBJ): gdevbmp.c $(PDEVH) $(gdevpccm_h) bmpmono.dev: $(bmp_) $(SHP)gssetdev bmpmono $(bmp_) bmp16.dev: $(bmp_) $(SHP)gssetdev bmp16 $(bmp_) bmp256.dev: $(bmp_) $(SHP)gssetdev bmp256 $(bmp_) bmp16m.dev: $(bmp_) $(SHP)gssetdev bmp16m $(bmp_) ### ------------------------- GIF file formats ------------------------- ### GIF=gdevgif.$(OBJ) gdevpccm.$(OBJ) gdevprn.$(OBJ) gdevgif.$(OBJ): gdevgif.c $(PDEVH) $(gdevpccm_h) gifmono.dev: $(GIF) $(SHP)gssetdev gifmono $(GIF) gif8.dev: $(GIF) $(SHP)gssetdev gif8 $(GIF) ### ------------------------- PCX file formats ------------------------- ### pcx_=gdevpcx.$(OBJ) gdevpccm.$(OBJ) gdevprn.$(OBJ) gdevpcx.$(OBJ): gdevpcx.c $(PDEVH) $(gdevpccm_h) $(gxlum_h) pcxmono.dev: $(pcx_) $(SHP)gssetdev pcxmono $(pcx_) pcxgray.dev: $(pcx_) $(SHP)gssetdev pcxgray $(pcx_) pcx16.dev: $(pcx_) $(SHP)gssetdev pcx16 $(pcx_) pcx256.dev: $(pcx_) $(SHP)gssetdev pcx256 $(pcx_) ###### ------------------- Portable Bitmap devices ------------------ ###### ### For more information, see the pbm(5), pgm(5), and ppm(5) man pages. ### pxm_=gdevpbm.$(OBJ) gdevprn.$(OBJ) gdevpbm.$(OBJ): gdevpbm.c $(PDEVH) $(gxlum_h) ### Portable Bitmap (PBM, plain or raw format, magic numbers "P1" or "P4") pbm.dev: $(pxm_) $(SHP)gssetdev pbm $(pxm_) pbmraw.dev: $(pxm_) $(SHP)gssetdev pbmraw $(pxm_) ### Portable Graymap (PGM, plain or raw format, magic numbers "P2" or "P5") pgm.dev: $(pxm_) $(SHP)gssetdev pgm $(pxm_) pgmraw.dev: $(pxm_) $(SHP)gssetdev pgmraw $(pxm_) ### Portable Pixmap (PPM, plain or raw format, magic numbers "P3" or "P6") ppm.dev: $(pxm_) $(SHP)gssetdev ppm $(pxm_) ppmraw.dev: $(pxm_) $(SHP)gssetdev ppmraw $(pxm_) ### -------------------------- TIFF/F device ---------------------------- ### ### This driver outputs images in a TIFF format ### ### Use -sDEVICE=tiffg3 and ### ### -r204x98 for low resolution output, or ### ### -r204x196 for high resolution output ### ### Note also that 3 page sizes are understood: letter, A4, and B4 ### ### Note: this driver was contributed by a user: please contact ### ### Sam Leffler (sam@sgi.com) if you have questions. ### tiffg3_=gdevtiff.$(OBJ) gdevprn.$(OBJ) tiffg3.dev: $(tiffg3_) $(SHP)gssetdev tiffg3 $(tiffg3_) gdevtiff.$(OBJ): gdevtiff.c $(GDEV) $(gdevprn_h) gdevdfg3.h gdevtiff.h