What is Info?
=============

This text documents the use of the GNU Info program, version 2.9.

Info is a program which is used to view info files on an ASCII terminal. info files are the result of processing texinfo files with the program makeinfo or with  the Emacs command M-x texinfo-format-buffer.  Finally, texinfo is a documentation language which allows a printed manual and online documentation (an info file) to be produced from a single source file.

Command Line Options
********************

GNU Info accepts several options to control the initial node being viewed, and to specify which directories to search for info files.  Here is a template showing an invocation of GNU Info from the shell:

     info [--OPTION-NAME OPTION-VALUE] MENU-ITEM...

The following OPTION-NAMES are available when invoking Info from the shell:

--directory DIRECTORY-PATH
-d DIRECTORY-PATH
     Adds DIRECTORY-PATH to the list of directory paths searched when Info needs to find a file.  You may issue --directory multiple times; once for each directory which contains info files. Alternatively, you may specify a value for the environment variable INFOPATH; if --directory is not given, the value of INFOPATH is used.  The value of INFOPATH is a colon separated list of directory names.  If you do not supply INFOPATH or --directory-path a default path is used.

--file FILENAME
-f FILENAME
     Specifies a particular info file to visit.  Instead of visiting the file dir, Info will start with (FILENAME)Top as the first file and node.

--node NODENAME
-n NODENAME
     Specifies a particular node to visit in the initial file loaded.  This is especially useful in conjunction with --file (Of course, you can specify both the file and node in a --node command; but don't forget to escape the open and close parentheses from the shell as in: info --node '(emacs)Buffers').  You may specify --node multiple times; for an interactive Info, each NODENAME is visited in its own window, for a non-interactive Info (such as when --output is given) each NODENAME is processed sequentially.

--output FILENAME
-o FILENAME
     Specify FILENAME as the name of a file to output to.  Each node that Info visits will be output to FILENAME instead of interactively viewed.  A value of - for FILENAME specifies the standard output.

--subnodes
     This option only has meaning when given in conjunction with --output.  It means to recursively output the nodes appearing in the menus of each node being output.  Menu items which resolve to external info files are not output, and neither are menu items which are members of an index.  Each node is only output once.

--help
-h
     Produces a relatively brief description of the available Info options.

--version
     Prints the version information of Info and exits.

MENU-ITEM
     Remaining arguments to Info are treated as the names of menu items.  The first argument would be a menu item in the initial node visited, while the second argument would be a menu item in the first argument's node. You can easily move to the node of your choice by specifying the menu names which describe the path to that node.  For example,

          info emacs buffers

     first selects the menu item Emacs in the node (dir)Top, and then selects the menu item Buffers in the node (emacs)Top.

Moving the Cursor
*****************

Many people find that reading screens of text page by page is made easier when one is able to indicate particular pieces of text with some kind of pointing device.  Since this is the case, GNU Info (both the Emacs and standalone versions) have several commands which allow you to move the cursor about the screen.  The notation used in this manual to describe keystrokes is identical to the notation used within the Emacs manual, and the GNU Readline manual.  See Character Conventions (the GNU Emacs Manual), if you are unfamilar with the notation.

The following table lists the basic cursor movement commands in Info. Each entry consists of the key sequence you should type to execute the cursor movement, the M-x (M-x is also a command; it invokes execute-extended-command.  See Executing an extended command (the GNU Emacs Manual), for more detailed information.) command name (displayed in parentheses), and a short description of what the command does.  All of the cursor motion commands can take an numeric argument (see universal-argument), to find out how to supply them.  With a numeric argument, the motion commands are simply executed that many times; for example, a numeric argument of 4 given to next-line causes the cursor to move down 4 lines.  With a negative numeric argument, the motion is reversed; an argument of -4 given to the next-line command would cause the cursor to move up 4 lines.

C-n (next-line)
     Moves the cursor down to the next line.

C-p (prev-line)
     Move the cursor up to the previous line.

C-a (beginning-of-line)
     Move the cursor to the start of the current line.

C-e (end-of-line)
     Moves the cursor to the end of the current line.

C-f (forward-char)
     Move the cursor forward a character.

C-b (backward-char)
     Move the cursor backward a character.

M-f (forward-word)
     Moves the cursor forward a word.

M-b (backward-word)
     Moves the cursor backward a word.

M-< (beginning-of-node)
b
     Moves the cursor to the start of the current node.

M-> (end-of-node)
     Moves the cursor to the end of the current node.

M-r (move-to-window-line)
     Moves the cursor to a specific line of the window.  Without a numeric argument, M-r moves the cursor to the start of the line in the center of the window.  With a numeric argument of N, M-r moves the cursor to the start of the Nth line in the window.

Moving Text Within a Window
***************************

Sometimes you are looking at a screenful of text, and only part of the current paragraph you are reading is visible on the screen.  The commands detailed in this section are used to shift which part of the current node is visible on the screen.

SPC (scroll-forward)
C-v
     Shift the text in this window up.  That is, show more of the node which is currently below the bottom of the window.  With a numeric argument, show that many more lines at the bottom of the window; a numeric argument of 4 would shift all of the text in the window up 4 lines (discarding the top 4 lines), and show you four new lines at the bottom of the window.  Without a numeric argument, SPC takes the bottom two lines of the window and places them at the top of the window, redisplaying almost a completely new screenful of lines.

DEL (scroll-backward)
M-v
     Shift the text in this window down.  The inverse of scroll-forward.

The scroll-forward and scroll-backward commands can also move forward and backward through the node structure of the file.  If you press SPC while viewing the end of a node, or DEL while viewing the beginning of a node, what happens is controlled by the variable scroll-behaviour.  See scroll-behaviour, for more information.

C-l (redraw-display)
     Redraw the display from scratch, or shift the line containing the cursor to a specified location.  With no numeric argument, C-l clears the screen, and then redraws its entire contents.  Given a numeric argument of N, the line containing the cursor is shifted so that it is on the Nth line of the window.

C-x w (toggle-wrap)
     Toggles the state of line wrapping in the current window.  Normally, lines which are longer than the screen width wrap, i.e., they are continued on the next line.  Lines which wrap have a \ appearing in the rightmost column of the screen.  You can cause such lines to be terminated at the rightmost column by changing the state of line wrapping in the window with C-x w.  When a line which needs more space than one screen width to display is displayed, a $ appears in the rightmost column of the screen, and the remainder of the line is invisible.

Selecting a New Node
********************

This section details the numerous Info commands which select a new node to view in the current window.

The most basic node commands are n, p, u, and l.

When you are viewing a node, the top line of the node contains some Info pointers which describe where the next, previous, and up nodes are.  Info uses this line to move about the node structure of the file when you use the following commands:

n (next-node)
     Selects the `Next' node.

p (prev-node)
     Selects the `Prev' node.

u (up-node)
     Selects the `Up' node.

You can easily select a node that you have already viewed in this window by using the l command -- this name stands for "last", and actually moves through the list of already visited nodes for this window.  l with a negative numeric argument moves forward through the history of nodes for this window, so you can quickly step between two adjacent (in viewing history) nodes.

l (history-node)
     Selects the most recently selected node in this window.

Two additional commands make it easy to select the most commonly selected nodes; they are t and d.

t (top-node)
     Selects the node Top in the current info file.

d (dir-node)
     Selects the directory node (i.e., the node (dir)).

Here are some other commands which immediately result in the selection of a different node in the current window:

< (first-node)
     Selects the first node which appears in this file.  This node is most often Top, but it doesn't have to be.

> (last-node)
     Selects the last node which appears in this file.

] (global-next-node)
     Moves forward or down through node structure.  If the node that you are currently viewing has a Next pointer, that node is selected. Otherwise, if this node has a menu, the first menu item is selected.  If there is no Next and no menu, the same process is tried with the Up node of this node.

[ (global-prev-node)
     Moves backward or up through node structure.  If the node that you are currently viewing has a Prev pointer, that node is selected. Otherwise, if the node has an Up pointer, that node is selected, and if it has a menu, the last item in the menu is selected.

You can get the same behaviour as global-next-node and global-prev-node while simply scrolling through the file with SPC and DEL; see scroll-behaviour, for more information.

g (goto-node)
     Reads the name of a node and selects it.  No completion is done while reading the node name, since the desired node may reside in a separate file.  The node must be typed exactly as it appears in the info file.  A file name may be included as with any node specification, for example

          g(emacs)Buffers

     finds the node Buffers in the info file emacs.

C-x k (kill-node)
     Kills a node.  The node name is prompted for in the echo area, with a default of the current node.  Killing a node means that Info tries hard to forget about it, removing it from the list of history nodes kept for the window where that node is found.  Another node is selected in the window which contained the killed node.

C-x C-f (view-file)
     Reads the name of a file and selects the entire file.  The command

          C-x C-f FILENAME

     is equivalent to typing

          g(FILENAME)*

C-x C-b (list-visited-nodes)
     Makes a window containing a menu of all of the currently visited nodes. This window becomes the selected window, and you may use the standard Info commands within it.

C-x b (select-visited-node)
     Selects a node which has been previously visited in a visible window. This is similar to C-x C-b followed by m, but no window is created.

Searching an Info File
**********************

GNU Info allows you to search for a sequence of characters throughout an entire info file, search through the indices of an info file, or find areas within an info file which discuss a particular topic.

s (search)
     Reads a string in the echo area and searches for it.

C-s (isearch-forward)
     Interactively searches forward through the info file for a string as you type it.

C-r (isearch-backward)
     Interactively searches backward through the info file for a string as you type it.

i (index-search)
     Looks up a string in the indices for this info file, and selects a node where the found index entry points to.

, (next-index-match)
     Moves to the node containing the next matching index item from the last i command.

The most basic searching command is s (search).  The s command prompts you for a string in the echo area, and then searches the remainder of the info file for an ocurrence of that string. If the string is found, the node containing it is selected, and the cursor is left positioned at the start of the found string.  Subsequent s commands show you the default search string within [ and ]; pressing RET instead of typing a new string will use the default search string.

Incremental searching is similar to basic searching, but the string is looked up while you are typing it, instead of waiting until the entire search string has been specified.

Selecting Cross References
**************************

We have already discussed the Next, Prev, and Up pointers which appear at the top of a node.  In addition to these pointers, a node may contain other pointers which refer you to a different node, perhaps in another info file.  Such pointers are called cross references, or xrefs for short.

Parts of an Xref
================

Cross references have two major parts: the first part is called the label; it is the name that you can use to refer to the cross reference, and the second is the target; it is the full name of the node that the cross reference points to.

The target is separated from the label by a colon :; first the label appears, and then the target.  For example, in the sample menu cross reference below, the single colon separates the label from the target.

     * Foo Label: Foo Target.	More information about Foo.

Note the . which ends the name of the target.  The . is not part of the target; it serves only to let Info know where the target name ends.

A shorthand way of specifying references allows two adjacent colons to stand for a target name which is the same as the label name:

     * Foo Commands::		Commands pertaining to Foo.

In the above example, the name of the target is the same as the name of the label, in this case Foo Commands.

You will normally see two types of cross references while viewing nodes: menu references, and note references.  Menu references appear within a node's menu; they begin with a * at the beginning of a line, and continue with a label, a target, and a comment which describes what the contents of the node pointed to contains.

Note references appear within the body of the node text; they begin with *Note, and continue with a label and a target.

Like Next, Prev and Up pointers, cross references can point to any valid node.  They are used to refer you to a place where more detailed information can be found on a particular subject. Here is a cross reference which points to a node within the Texinfo documentation:  see Writing an Xref (the Texinfo Manual), for more information on creating your own texinfo cross references.

Selecting Xrefs
===============

The following table lists the Info commands which operate on menu items.

1 (menu-digit)
2 ... 9
     Within an Info window, pressing a single digit, (such as 1), selects that menu item, and places its node in the current window. For convenience, there is one exception; pressing 0 selects the last item in the node's menu.

0 (last-menu-item)
     Select the last item in the current node's menu.

m (menu-item)
     Reads the name of a menu item in the echo area and selects its node. Completion is available while reading the menu label.

M-x find-menu
     Moves the cursor to the start of this node's menu.

This table lists the Info commands which operate on note cross references.

f (xref-item)
r
     Reads the name of a note cross reference in the echo area and selects its node.  Completion is available while reading the cross reference label.

Finally, the next few commands operate on menu or note references alike:

TAB (move-to-next-xref)
     Moves the cursor to the start of the next nearest menu item or note reference in this node.  You can then use RET (select-reference-this-line to select the menu or note reference.

M-TAB (move-to-prev-xref)
     Moves the cursor the start of the nearest previous menu item or note reference in this node.

RET (select-reference-this-line)
     Selects the menu item or note reference appearing on this line.

Manipulating Multiple Windows
*****************************

A window is a place to show the text of a node.  Windows have a view area where the text of the node is displayed, and an associated mode line, which briefly describes the node being viewed.

GNU Info supports multiple windows appearing in a single screen; each window is separated from the next by its modeline.  At any time, there is only one active window, that is, the window in which the cursor appears.  There are commands available for creating windows, changing the size of windows, selecting which window is active, and for deleting windows.

The Mode Line
=============

A mode line is a line of inverse video which appears at the bottom of an info window.  It describes the contents of the window just above it; this information includes the name of the file and node appearing in that window, the number of screen lines it takes to display the node, and the percentage of text that is above the top of the window.  It can also tell you if the indirect tags table for this info file needs to be updated, and whether or not the info file was compressed when stored on disk.

Here is a sample mode line for a window containing an uncompressed file named dir, showing the node Top.

     -----Info: (dir)Top, 40 lines --Top---------------------------------------
                 ^^   ^   ^^^        ^^
               (file)Node #lines    where

When a node comes from a file which is compressed on disk, this is indicated in the mode line with two small z's.  In addition, if the info file containing the node has been split into subfiles, the name of the subfile containing the node appears in the modeline as well:

     --zz-Info: (emacs)Top, 291 lines --Top-- Subfile: emacs-1.Z---------------

When Info makes a node internally, such that there is no corresponding info file on disk, the name of the node is surrounded by asterisks (*).  The name itself tells you what the contents of the window are; the sample mode line below shows an internally constructed node showing possible completions:

     -----Info: *Completions*, 7 lines --All-----------------------------------

Window Commands
===============

It can be convenient to view more than one node at a time.  To allow this, Info can display more than one window.  Each window has its own mode line (see The Mode Line) and history of nodes viewed in that window (see history-node).

C-x o (next-window)
     Selects the next window on the screen.  Note that the echo area can only be selected if it is already in use, and you have left it temporarily. Normally, C-x o simply moves the cursor into the next window on the screen, or if you are already within the last window, into the first window on the screen.  Given a numeric argument, C-x o moves over that many windows.  A negative argument causes C-x o to select the previous window on the screen.

M-x prev-window
     Selects the previous window on the screen.  This is identical to C-x o with a negative argument.

C-x 2 (split-window)
     Splits the current window into two windows, both showing the same node. Each window is one half the size of the original window, and the cursor remains in the original window.  The variable automatic-tiling can cause all of the windows on the screen to be resized for you automatically, please see automatic-tiling for more information.

C-x 0 (delete-window)
     Deletes the current window from the screen.  If you have made too many windows and your screen appears cluttered, this is the way to get rid of some of them.

C-x 1 (keep-one-window)
     Deletes all of the windows excepting the current one.

ESC C-v (scroll-other-window)
     Scrolls the other window, in the same fashion that C-v might scroll the current window.  Given a negative argument, the "other" window is scrolled backward.

C-x ^ (grow-window)
     Grows (or shrinks) the current window.  Given a numeric argument, grows the current window that many lines; with a negative numeric argument, the window is shrunk instead.

C-x t (tile-windows)
     Divides the available screen space among all of the visible windows. Each window is given an equal portion of the screen in which to display its contents.  The variable automatic-tiling can cause tile-windows to be called when a window is created or deleted. See automatic-tiling.

The Echo Area
=============

The echo area is a one line window which appears at the bottom of the screen.  It is used to display informative or error messages, and to read lines of input from you when that is necessary.  Almost all of the commands available in the echo area are identical to their Emacs counterparts, so please refer to that documentation for greater depth of discussion on the concepts of editing a line of text.  The following table briefly lists the commands that are available while input is being read in the echo area:

C-f (echo-area-forward)
     Moves forward a character.

C-b (echo-area-backward)
     Moves backward a character.

C-a (echo-area-beg-of-line)
     Moves to the start of the input line.

C-e (echo-area-end-of-line)
     Moves to the end of the input line.

M-f (echo-area-forward-word)
     Moves forward a word.

M-b (echo-area-backward-word)
     Moves backward a word.

C-d (echo-area-delete)
     Deletes the character under the cursor.

DEL (echo-area-rubout)
     Deletes the character behind the cursor.

C-g (echo-area-abort)
     Cancels or quits the current operation.  If completion is being read, C-g discards the text of the input line which does not match any completion.  If the input line is empty, C-g aborts the calling function.

RET (echo-area-newline)
     Accepts (or forces completion of) the current input line.

C-q (echo-area-quoted-insert)
     Inserts the next character verbatim.  This is how you can insert control characters into a search string, for example.

PRINTING CHARACTER (echo-area-insert)
     Inserts the character.

M-TAB (echo-area-tab-insert)
     Inserts a TAB character.

C-t (echo-area-transpose-chars)
     Transposes the characters at the cursor.

The next group of commands deal with killing, and yanking text.  For an in depth discussion of killing and yanking, see Killing and Deleting (the GNU Emacs Manual)

M-d (echo-area-kill-word)
     Kills the word following the cursor.

M-DEL (echo-area-backward-kill-word)
     Kills the word preceding the cursor.

C-k (echo-area-kill-line)
     Kills the text from the cursor to the end of the line.

C-x DEL (echo-area-backward-kill-line)
     Kills the text from the cursor to the beginning of the line.

C-y (echo-area-yank)
     Yanks back the contents of the last kill.

M-y (echo-area-yank-pop)
     Yanks back a previous kill, removing the last yanked text first.

Sometimes when reading input in the echo area, the command that needed input will only accept one of a list of several choices.  The choices represent the possible completions, and you must respond with one of them.  Since there are a limited number of responses you can make, Info allows you to abbreviate what you type, only typing as much of the response as is necessary to uniquely identify it.  In addition, you can request Info to fill in as much of the response as is possible; this is called completion.

The following commands are available when completing in the echo area:

TAB (echo-area-complete)
SPC
     Inserts as much of a completion as is possible.

? (echo-area-possible-completions)
     Displays a window containing a list of the possible completions of what you have typed so far.  For example, if the available choices are:

          bar
          foliate
          food
          forget

     and you have typed an f, followed by ?, the possible completions would contain:

          foliate
          food
          forget

     i.e., all of the choices which begin with f.  Pressing SPC or TAB would result in fo appearing in the echo area, since all of the choices which begin with f continue with o. Now, typing l followed by TAB results in foliate appearing in the echo area, since that is the only choice which begins with fol.

ESC C-v (echo-area-scroll-completions-window)
     Scrolls the completions window, if that is visible, or the "other" window if not.

Printing Out Nodes
******************

You may wish to print out the contents of a node as  a quick reference document for later use.  Info provides you with a command for doing this.  In general, we recommend that you use TeX to format the document and print sections of it, by running tex on the texinfo source file.

M-x print-node
     Pipes the contents of the current node through the command in the environment variable INFO_PRINT_COMMAND.  If the variable doesn't exist, the node is simply piped to lpr.

Miscellaneous Commands
**********************

GNU Info contains several commands which self-document GNU Info:

M-x describe-command
     Reads the name of an Info command in the echo area and then displays a brief description of what that command does.

M-x describe-key
     Reads a key sequence in the echo area, and then displays the name and documentation of the Info command that the key sequence invokes.

M-x describe-variable
     Reads the name of a variable in the echo area and then displays a brief description of what the variable affects.

M-x where-is
     Reads the name of an Info command in the echo area, and then displays a key sequence which can be typed in order to invoke that command.

C-h (get-help-window)
?
     Creates (or moves into) the window displaying *Help*, and places a node containing a quick reference card into it.  This window displays the most concise information about GNU Info available.

h (get-info-help-node)
     Tries hard to visit the node (info)Help.  The info file info.texi distributed with GNU Info contains this node.  Of course, the file must first be processed with makeinfo, and then placed into the location of your info directory.

Here are the commands for creating a numeric argument:

C-u (universal-argument)
     Starts (or multiplies by 4) the current numeric argument.  C-u is a good way to give a small numeric argument to cursor movement or scrolling commands; C-u C-v scrolls the screen 4 lines, while C-u C-u C-n moves the cursor down 16 lines.

M-1 (add-digit-to-numeric-arg)
M-2 ... M-9
     Adds the digit value of the invoking key to the current numeric argument.  Once Info is reading a numeric argument, you may just type the digits of the argument, without the Meta prefix.  For example, you might give C-l a numeric argument of 32 by typing:

          C-u 3 2 C-l

     or

          M-3 2 C-l

C-g is used to abort the reading of a multi-character key sequence, to cancel lengthy operations (such as multi-file searches) and to cancel reading input in the echo area.

C-g (abort-key)
     Cancels current operation.

The q command of Info simply quits running Info.

q (quit)
     Exits GNU Info.

If the operating system tells GNU Info that the screen is 60 lines tall, and it is actually only 40 lines tall, here is a way to tell Info that the operating system is correct.

M-x set-screen-height
     Reads a height value in the echo area and sets the height of the displayed screen to that value.

Finally, Info provides a convenient way to display footnotes which might be associated with the current node that you are viewing:

ESC C-f (show-footnotes)
     Shows the footnotes (if any) associated with the current node in another window.  You can have Info automatically display the footnotes associated with a node when the node is selected by setting the variable automatic-footnotes.  See automatic-footnotes.

Manipulating Variables
**********************

GNU Info contains several variables whose values are looked at by various Info commands.  You can change the values of these variables, and thus change the behaviour of Info to more closely match your environment and info file reading manner.

M-x set-variable
     Reads the name of a variable, and the value for it, in the echo area and then sets the variable to that value.  Completion is available when reading the variable name; often, completion is available when reading the value to give to the variable, but that depends on the variable itself.  If a variable does not supply multiple choices to complete over, it expects a numeric value.

M-x describe-variable
     Reads the name of a variable in the echo area and then displays a brief description of what the variable affects.

Here is a list of the variables that you can set in Info.

automatic-footnotes
     When set to On, footnotes appear and disappear automatically. This variable is On by default.  When a node is selected, a window containing the footnotes which appear in that node is created, and the footnotes are displayed within the new window.  The window that Info creates to contain the footnotes is called *Footnotes*.  If a node is selected which contains no footnotes, and a *Footnotes* window is on the screen, the *Footnotes* window is deleted. Footnote windows created in this fashion are not automatically tiled so that they can use as little of the display as is possible.

automatic-tiling
     When set to On, creating or deleting a window resizes other windows.  This variable is Off by default.  Normally, typing C-x 2 divides the current window into two equal parts.  When automatic-tiling is set to On, all of the windows are resized automatically, keeping an equal number of lines visible in each window.  There are exceptions to the automatic tiling; specifically, the windows *Completions* and *Footnotes* are not resized through automatic tiling; they remain their original size.

visible-bell
     When set to On, GNU Info attempts to flash the screen instead of ringing the bell.  This variable is Off by default.  Of course, Info can only flash the screen if the terminal allows it; in the case that the terminal does not allow it, the setting of this variable has no effect.  However, you can make Info perform quietly by setting the errors-ring-bell variable to Off.

errors-ring-bell
     When set to On, errors cause the bell to ring.  The default setting of this variable is On.

gc-compressed-files
     When set to On, Info garbage collects files which had to be uncompressed.  The default value of this variable is Off. Whenever a node is visited in Info, the info file containing that node is read into core, and Info reads information about the tags and nodes contained in that file.  Once the tags information is read by Info, it is never forgotten.  However, the actual text of the nodes does not need to remain in core unless a particular info window needs it.  For non-compressed files, the text of the nodes does not remain in core when it is no longer in use.  But de-compressing a file can be a time consuming operation, and so Info tries hard not to do it twice. gc-compressed-files tells Info it is okay to garbage collect the text of the nodes of a file which was compressed on disk.

show-index-match
     When set to On, the portion of the matched search string is highlighted in the message which explains where the matched search string was found.  The default value of this variable is On. When Info displays the location where an index match was found, (see next-index-match), the portion of the string that you had typed is highlighted by displaying it in the inverse case from its surrounding characters.

scroll-behaviour
     Controls what happens when forward scrolling is requested at the end of a node, or when backward scrolling is requested at the beginning of a node.  The default value for this variable is Continuous.  There are three possible values for this variable:

     Continuous
          Tries to get the first item in this node's menu, or failing that, the Next node, or failing that, the Next of the Up. This behaviour is identical to using the ] (global-next-node) and [ (global-prev-node) commands.

     Next Only
          Only tries to get the Next node.

     Page Only
          Simply gives up, changing nothing.  If scroll-behaviour is Page Only, no scrolling command can change the node that is being viewed.

scroll-step
     The number of lines to scroll when the cursor moves out of the window. Scrolling happens automatically if the cursor has moved out of the visible portion of the node text when it is time to display.  Usually the scrolling is done so as to put the cursor on the center line of the current window.  However, if the variable scroll-step has a nonzero value, Info attempts to scroll the node text by that many lines; if that is enough to bring the cursor back into the window, that is what is done.  The default value of this variable is 0, thus placing the cursor (and the text it is attached to) in the center of the window. Setting this variable to 1 causes a kind of "smooth scrolling" which some people prefer.

ISO-Latin
     When set to On, Info accepts and displays ISO Latin characters. By default, Info assumes an ASCII character set.  ISO-Latin tells Info that it is running in an environment where the European standard character set is in use, and allows you to input such characters to Info, as well as display them.

Info for System Administrators
******************************

This text describes some common ways of setting up an Info heierarchy from scratch, and details the various options that are available when installing Info.  This text is designed for the person who is installing GNU Info on the system; although users may find the information present in this section interesting, none of it is vital to understanding how to use GNU Info.

Setting the INFOPATH
====================

Where are my Info files kept?

Editing the DIR node
====================

What goes in `DIR', and why?

Storing Info files
==================

Alternate formats allow flexibilty in setups.

Using `localdir'
================

Building DIR on the fly.

Example setups
==============

Some common ways to origanize Info files.