I wanna Say Thanks To ApoXX, Spaz, Blasta, and SuperDaimyo




Most IRC clients (IRC programs) are written to use the standard Unix 
commands. However, not all clients will accept all the Unix commands. Many 
clients also use modifications of the commands or commands that only work 
with the particular client. Bear this in mind and read your specific clients 
documentation for the commands it does support. The commands presented here 
are the ones most commonly supported by most IRC clients.
There are three syntax conventions that you need to remember with IRC 
commands.

All IRC commands begin with the forward slash, " / ". Anything else you type 
is considered text typed to the screen as normal conversation.

All channel names begin with a pound sign, " # "There is an exception here. 
Some channel names will begin with a " & ", but those are few and far 
between and you may never see them in your travels on IRC.

IRC is not case sensitive. So you can use either upper, lower, or mixed case 
letters if you wish in your commands.





Note: the use of " # " indicates that the channel name should be 
substituted...
i.e. #newbies in these examples.

GENERAL COMMANDS
Command Description Example
/join [#] use to join a channel /join #newbies
/part [#] use to leave a channel /part #newbies
/leave [#] same as part /leave #newbies
/quit (message) use to quit IRC. A message may be added to the command, but 
is optional. /quit see ya'll later!
/whois [nick] used to get info on a nick. /whois pipur
/whowas [nick] used to get info on a nick that has just left IRC or a person 
who has just changed their nick. /whowas pipur
/who [#] shows nicks, addresses, and optional user info if available for 
users on a channel /who #newbies
/names [#] shows nicks of users on a channel /names #newbies
/msg [nick] [message] sends a private message (whisper) to a user /msg pipur 
hello there
/query [nick] opens a new window for private dialog with a nick /query pipur
/nick [newnick] if I wanted to change my current nick, pipurur, to pipur, I 
would use this command /nick pipur
/me [action describe] If pipur typed this example, it would be displayed as 
*pipur waves to Alleghany /me waves to Alleghany
/away [away message] use to tell others you are not currently at your 
computer. A message can be included. To set yourself back, type /away again. 
/away checking mail!
/list requests a list of currently formed channels from the server. The 
listing you request is not updated until you issue the request again. /list
/invite [nick] [#] use to invite a nick who is elsewhere on IRC to join you 
on a channel. /invite pipur #newbies
/ignore [nick/address] use to prevent someone from talking to you. The 
persons nick or address may be used.  /ignore pipur
/kick [#] [nick] used to kick a user from the channel. You must be a channel 
op to use this command. /kick #newbies pipur
/mode [nick] +i This is the invisible mode. You are not literally invisible 
on IRC. Users on the same channel as you still see you there.You are 
invisible to a user who does a /who or /names. A /whois nick, however, will 
show your user information and the channels you're on. /mode pipur +i





Channel Operator Mode Commands
Channel operators (also known as ops) control the channel they are on. They 
will have an " @ " in front of their nick. They are effectively the "bosses" 
of the channel. There are two ways to become a channel operator. First is by 
creating a channel. You create a channel by joining a channel that does not 
currently exist. When you do this, the server sets you as the channel op. 
The second way is to be made an operator by an existing operator.

Channel ops maintain control of the channel through the use of channel mode 
commands. These are commands that only channel operators have access to, and 
can be used to perform various functions on the channel.


Please Note: only channel operators have access to the following function
Typing a minus sign " - " in place of the plus sign " + " reverses the 
command...
i.e. +o ops, and -o deops




Note: the use of " # " indicates that the channel name should be 
substituted...
i.e. #newbies in these examples. OPERATOR AND CHANNEL MODE COMMANDS
Mode Command Description Example
/mode [#] +o [nick] grant ops to a nick /mode #newbies +o pipur
/mode [#] +b [address] ban a nick by their address from the channel. The 
proper address format is *!*username@*.host.domain /mode #newbies +b 
*!*jp@*.irc.com
/mode [#] +m set the channel mode to moderate. This means that only ops can 
type to the channel. All others are silenced on the channel. /mode #newbies 
+m
/mode [#] +v [nick] used in conjunction with +m mode. After setting to 
moderate, a user can be given permission to speak by setting the mode to +v. 
/mode #hi +v pipur
/mode [#] +s makes the channel secret. It will not be shown in a channel 
listing. It can still be joined if the channel name is known. /mode #newbies 
+s
/mode [#] +p makes the channel private. The channel cannot be joined unless 
an invite is issued. The users on the channel can be listed with a /who or 
/names command. /mode #newbies +p
/mode [#] +i makes the channel invite only. You must be invited by another 
nick on the channel to join. /mode #newbies +i
/mode [#] +t restricts channel topic changes to operators only. /mode 
#newbies +t
/mode [#] +n prevents messages from outside the channel from being sent to 
the channel. This does not affect personal messages to individual users. 
/mode #newbies +n
/mode [#] +l [number] limits the number of users that may occupy the 
channel. In this example, the limit is 6 users. /mode #newbies +l 6
/mode [#] +k [keyword] sets a password for the channel. Cannot join without 
typing /join #channelname [keyword] /mode #newbies +k shazam





CTCP and DCC Commands
CTCP stands for Client-To-Client-Protocol. The CTCP command performs certain 
client specific functions on the IRC network. It permits you to find out 
various kinds of information and perform some useful functions on IRC. Many 
clients allow you to use CTCP to customize various functions, such as 
setting up a file server on your system, or providing a means to grant op 
status to users when you are not there to do it yourself. CTCP commands can 
also be disabled by the user, so don't be surprised if you get no 
information back from a user when you initiate certain CTCP requests to 
them.

DCC is Direct Client-to-Client. This is probably one of the most useful and 
desirable functions on IRC. With DCC you can send and receive files and chat 
directly, privately, and securely to someone on IRC. The DCC channel is not 
subject to lag and is secure because it does not use the IRC chat channels 
to transmit information. It forms a direct link between two users (hence 
direct-client-to-client).

CAUTION!! As useful as DCC is, you should be very cautious about receiving 
files. NEVER accept a file from someone you don't know or trust! Just like 
the real world, there are virus lurking out there, and there are jerks on 
IRC just waiting to send system corrupting files to unsuspecting users. At 
the very least, run a virus scan on a file before you execute it. It will 
save you lots of headaches in the long run.




CTCP Commands (using pipur in the sample replies)
Command Description You Might See Something Like This
/ctcp [nick] ping ping is used to determine the amount of time it takes for 
your signal (messages) to get to another nick and back in seconds. It 
measures the amount of lag time for the message. Excessive lag can make 
communication difficult. [pipur PING reply]: 2 secs
/ctcp [nick] version version is used to query a nicks' client for the type 
or name of the IRC program they are running. [pipur VERSION reply]: mIRC16 
v3.8 IRC Client K.Mardam-Bey
/ctcp [nick] finger finger gives additional information about a nick. 
Sometimes its not much different from the /whois [nick] information. [pipur 
FINGER reply]: Don't judge me by my "looks" (biscuits@neosoft.com) Idle 3 
seconds (Beware, lest the magic overwhelm you....)
/ctcp [nick] userinfo the userinfo ctcp function usually gives about the 
same information as the finger reply. [pipur USERINFO reply]: Don't judge me 
by my "looks" (biscuits@neosoft.com) Idle 0 seconds (Beware, lest the magic 
overwhelm you....)
/ctcp [nick] clientinfo clientinfo ctcp function will tell you what 
functions are active on the nicks' client. Can be useful if you want to know 
if things like DCC, ping, or finger are active on their system. [pipur 
CLIENTINFO reply]: ACCEPT ACTION CLIENTINFO DCC ECHO FINGER PING RESUME 
SOUND TIME USERINFO VERSION
/ctcp [nick] time this checks the local date and time on a nicks' computer. 
I guess it might be useful if you wanted to know what time it was in 
Australia, if your were talking to an Aussie. [pipur TIME reply]: Tue Dec 26 
15:38:21 1995




DCC Commands
Command Description
/dcc chat [nick] this initiates a dcc chat session with the specified nick. 
Since the connection does not go through the IRC network, it is the most 
secure type of direct communication with another user. Depending on your 
client, you will probably get some kind of message asking you to accept the 
DCC chat request.
/dcc send [nick] [filename] this command initiates a file send to the 
designated nick. The file name and the full path of the file on your system 
must be specified.
/dcc get [nick] [filename] this command acknowledges and accepts a DCC file 
transfer initiated by another user to you. Once you have typed the GET 
response, the file transfer to you will begin.
/dcc close [nick] use this command to refuse a DCC file offer or chat 
request sent to you, or stop a DCC transfer that is in progress, or to close 
a DCC chat session.
/dcc list use this function to get a listing of currently active DCC 
connections that you have going.



-LaZy