  Version 4000.1, dated January 15th, 1992.
  THIS IS A HELP FILE DEVELOPED BY KG6YY, PETER ELLENA.
  KEY           Function
  ----------    --------------------------------------------------------------
  F1            Activate function menus.
  F2            Toggle from pretype to dialog and vice versa.
  F3            Toggle ALTERNATE port setup.
  F4            Create new configuration file from configuration menus.
  F5            Force disk write and start new log file.
  F6            Place a control key in text.
  F7            Force Relay recording to start.  (Clears Pretype buffer.)
  F8            Zoom/UnZoom Window with cursor.
  F9            Select Session 1.
  F10           Select Session 2.
  S-F1          Help.
  S-F2          Configure.
  S-F3          Disk I/O
  S-F4          Window management.
  S-F5          Miscellaneous options.
  S-F6          Port Setup.
  S-F7          File usage display.
  S-F8          Change constants.
  Ctrl-^ (CTRL SHIFT 6) Copy BASE to ALTERNATE PORT, current SESSION.
  Ctrl-a        Select string and place at end of text.
  Ctrl-b        Mark first or last line of block.  (Only one block at a time.)
  Ctrl-c        When typed two times in succession causes program to terminate.
  Ctrl-d        Delete the marked block.
  Ctrl-e        Erase window.
  Ctrl-f        Re-send last transmission or Force Relay to play.
  Ctrl-g        Mark end of text with NNNN and Ctrl-v. Transmission ends.
  Ctrl-h        Back space.
  Ctrl-i        Tab.
  Ctrl-j        Line feed.  Also causes line to be inserted when editing.
  Ctrl-k        Reserved for future use. Nothing now!!!  See Z100 controls.
  Ctrl-l        New line with fancy margin.
  Ctrl-m        Carriage return.
  Ctrl-n        Not used.
  Ctrl-o        Toggle Port On/Off.
  Ctrl-p        Not used.
  Ctrl-q        Toggle Set/Clear Bell Reminder Feature.
  Ctrl-r        Modifies 'PARTNER' call. Put cursor on word (up to 12 chars).
  Ctrl-s        Not used.
  Ctrl-t        Place time and date at cursor.
  Ctrl-u        Unmark the marked block.
  Ctrl-v        Set end of text in the text.   Transmission ends at the mark.
  Ctrl-w        Play WRU message.
  Ctrl-x        Toggle transmitter on and off. RS-232 pin #4 goes positive.
  Ctrl-y        Move marked block and insert following line cursor is on.
  Ctrl-z        Copy block and insert following the line cursor is on.
  Ctrl-\        Place Bell in text.  (Ctrl-reverse slash)
  Home          Beginning of line.  Top of window.  Top of file.
  Cursor keys.  Up,down,left,right as marked.  (May also force scrolling of the
                 window.)
  Ctrl-Shift-'-'  Search window buffer with active cursor for 'Search String'.
  Esc           When typed two times in succession causes program to terminate.

The following keys are unique to the IBM PC.

  KEY           Function
  ----------    --------------------------------------------------------------
  Ins           Toggles insert mode.
  Del           Deletes a character.
  PgUp          Scrolls window up one page.
  PgDn          Scrolls window down one page.
  End           End of line.  End of screen.  End of file.
  Ctrl-Bksp     Deletes a line.
  ALT-J         Toggles software squelch mode enabling.
  ALT-K         Opens software squelch.
  ALT-L         Closes software squelch if enabled.

The following keys are unique to the ZENITH Z-100.

  KEY           Function
  ----------    --------------------------------------------------------------
  Ichr          Toggles insert mode.
  Shift-Ichr    Deletes a character.
  InsLine       Insert a line.  (Same as Ctrl-j.)
  DelLine       Deletes a line.
  F0            End of line.  End of screen.  End of file.
  F11           Scrolls window up one page.
  F12           Scrolls window down one page.
  Help          Help.
  Ctrl-K,J      Toggles software squelch mode enabling. (two key sequences)
  Ctrl-K,K      Opens software squelch (two key sequences)
  Ctrl-K,L      Closes software squelch if enabled. (two key sequences)
  ---------------------------------------------------------------------
                        REMOTE CONTROL BAUDOT ONLY
                             
    callsignZAyyyyyy   - Resets ZB
    callsignZBzzzzzz   - Set Remote Bell (puts call on 24th line)
    callsignZC         - Set up Relay through callsign.  
    callsignZD         - Write Callsign buffer to disk. Insure receipt.
    callsignZFfilename -Query 'callsign' directory. 'callsign' responds with
                        filename. 
    callsignZR         - Callsign relays 'callsignZC' text. 
    callsignZP         - Replay previous transmission, WRU if pretype empty.
    callsignZW         - Play WRU
    callsignZLcallsign - Inquire remote station status. See page #26.
                         End sequence with CTRL-G (NNNN).
    callsignZMcallsign - Relay station call to Remote. See page #26..
                         Automatic response from relay station to
                         activate remote, unheard station.

    :TIME - Play all WRU'S
    :DISK - Play all WRU'S if in DISK COPY
    :xTIME - Play x call area WRU's (use 0 to 9 for x)
    :xDISK - Play x call area WRU's (use 0 to 9 for x)

   All the above commands must be started at left margin, to be recognized.

  ---------------------------------------------------------------------
                        PK-232 ONLY
  The following Table can be used in configuring TRTY for baudot.
  Column (3) strings can be placed anywhere in your Session 
  configuration as long as menu 8 options reflect the change.

    (1)        (2)         (3)             (5)           (6)
  Menu 8 |   TRTY.CGF  |    My    |   Function        | From your
  strings|     Name    |  strings |                   | keyboard
  ------------------------------------------------------------
    A    |   STUPSTR   |    "O"   | (START UP STRING) | CTL-X
    B    |   EOTSTR    |    "P"   | (EOT STRING)      | CTL-G
    C    |   WRUSTR    |    "R"   | (WRU STRING)      | CTL-W
  -------------------------------------------------------------------
             
   TRTY.CFG |  PK-232 String               |       COMMENTS
   Strings  |   Examples                   |        Remarks
                                           |
   STRING(A) "ZCZC\m\j\zZA\c\g"            |  Strings A thru K are strings I
   STRING(B) "ZCZC\m\jDE \c\m\j\zZB\c"     |  use.  There are numerous others
   STRING(C) "\zZC\m\j\zZC\m\j"            |  that can be written and placed
   STRING(D) "ZCZC\m\j\z DE \c\m\j\zZD\c\g"|  in any locations you desire)
   STRING(E) "ZCZC\m\jDE \c\L"             |
   STRING(F) " "                           |
   STRING(G) " "                           |
   STRING(H) "ZCZC\m\j\z DE NAME \c\m\j   "|
   STRING(I) "\z DE \c\m\j\g"              |
   STRING(J) "ZCZC\m\j\z DE \c\m\j    "    |
   STRING(K) "\z DE \c\j\g"                |
   STRING(L) " "                           |
   STRING(M) " "                           |


   STRING(N) "r\m"<---The PK-232 sees this as CTL-CR RTN.
   STRING(O) "X\M\J\SV\m"<---(The PK-232 sees this as:
                              CTL-C CR LF send string V RTN
                              CTL-X at the keyboard sends this string)
    


   STRING(P) ""<--The PK-232 sees this as a CTL-D.  When you send a CTL-G     
                   from the keyboard TRTY will respond with NNNN)


   STRING(Q) " "
   STRING(R) "\M\JZCZC \J    :::: \U\C\K\Y ::::\JNNNN"<---(personal
   STRING(S) " "                                           WRU String)
   STRING(T) " "
   STRING(U) " "
   STRING(V) ""<---(These are embedded CTL-O's, LTRS
   STRING(W) " "                       in PK-232 Language.  Embed them
   STRING(X) " "                       using the F6 in your trty.cfg)
   STRING(Y) " "
   STRING(Z) "ZCZC\M\JDE \C    \M\J\ZZW\M\J\G" <--This string is
              merely a convenience string for calling someone's WRU.
    



