(updated for version 0.98v)

The following are segments of the config and event files to make PRMBS
work on a KAM using both the HF and VHF ports.
It is important to have the streamsw set to $00/$00. This will be changed
once the multi-user versions of this pbbs come out some time in the
future.

Now the portion of the config file....


# ------ (B Port) COM2 starts here ------
# PK-87 can use 9600, very few other will - suggest 48,24, or 1200 baud
BT 6 15 4800
USAF MARS
[35;40;1m
YES (is TNC2 or compatible)
YES (a unit capable of supplying DCD for CONN/DISC indication)
YES 0323 10000  (Download window active )
# String to initialize TNC on A port
D
D
echo off
# These are PK-87 unique commands
#alfdisp off
# pk-87 has PPERSIST - much much better than DWAIT, use this if ya have the 87
#ppersist on
#persist 64
#slot 10
#----------
# This is the TAPR command
autolf off
#----------
mycall afa1cy-1 / afa1cy-4
unproto mail/mail v njxp06
paclen 40/128
newmode off
check 31
se $7f
cr off
cp on
pact a 14
dwait 6
frack 9/3
BT [ MailBox back on line ]
b e 200
*** EOF
# String to shutdown mon and conn for this TNC
conok off
mon off
BT [System in use by User]
b e 181
*** EOF
# String to this tNC when going back online awaiting connection
se $7f
cr off
cp on
maxf 1/4
retry 10/12
mon on
conok on
b e 180
*** EOF
# string to be sent to TNC when going INTO TERMINAL MODE
se $0d
cr on
cp off
*** EOF
# string to be sent to TNC when coming OUT OF TERMINAL MODE to online
se $7f
cr off
cp on
*** EOF
# optional appendage to forwarding header, (line must be here but may be
#  be left blank
Z:07424 N: New Jersey Gateway
YES 1704 5000  (Forward window IS  active 1700 - 0400 MAX 5KB)
# ------ Above this point is all Port B ------

Now the event file


P 0100 B
d
K V                   <-------  note the port selection command.
BT [ BBS Forwarding Mail ]
B E 90
*** EOF
P 0100 B
BT [ BBS Fowarding Mail ]
B E 90
*** EOF
M 0423 swap b1 -ttp* AFA1NC
M 0423 swap b1 -ttp* AFA1DA
M 0423 swap b1 -ttp* AFB1BO
M 0100 EXPORT C:\MBMAIL\MAILHAM.TXT WB2HVF  <-- these lines allow me to
M 0100 IMPORT C:\MBMAIL\MAILMARS.TXT       transfer mail from one side ddos to
D 0100 ERASE C:\MBMAIL\MAILMARS.TXT  the other without using a common data base
*** EOF                              (the other side has the names reversed)
P 1209 B
d
D
K H
*** EOF
M 1202 swap b1 -ttp* AFB6CC
M 1202 swap b1 -ttp* AGA6ML
M 1202 swap b1 -ttp* AFA5PL
M 1202 swap b1 -ttp* AFA5AF
M 1420 swap b1 -ttp* AFA2MY
P 1209 B
D
D
bt [BBS Fowarding Complete]
*** EOF
P 0100 B
BT [BBS Fowarding Complete]
*** EOF
M 2306 chat on
M 0722 chat off
P 0100 B
D
D
*** EOF
D 0606 TIMER /S
D 0202 COPY MAIL.DAT MAIL02.DAT
D 1010 COPY MAIL.DAT MAIL10.DAT
D 1818 COPY MAIL.DAT MAIL18.DAT
D 0202 COPY USER.DAT USER02.DAT
D 1010 COPY USER.DAT USER10.DAT
D 1818 COPY USER.DAT USER18.DAT

now to help you get started... a list of my kam's parms....


8BITCONV OFF
ASCBAUD  110
ALIAS    ON/ON
AX25L2V2 OFF/OFF
ABAUD    4800
AUTOCR   72
AUTOLF   OFF
AUTOSTRT OFF
AXDELAY  0
AXHANG   0
BEACON   EVERY 200/EVERY 200
BKONDEL  ON
BTEXT    [ MailBox is Unavailable ]

BUDLIST  OFF
BUDCALLS NONE
Link state is: DISCONNECTED
CANLINE  $18
CANPAC   $19
CCITT    OFF
CHECK    31/31
CMDTIME  1
CMSG     OFF/OFF
COMMAND  $03
CONMODE  CONVERS
CONOK    ON
CPACTIME ON
CR       OFF
CRADD    OFF
CRLFSUP  OFF
CSTAMP   OFF
CTEXT    

CWBAND   200
CWSPEED  10
CWTONE   750
DAYTIME  03/23/88  06:54:23
DAYTWEAK 8
DAYUSA   ON
DBLDISC  OFF
DELETE   $08
DIDDLE   OFF
DIGIPEAT ON/ON
DWAIT    6/6
ECHO     OFF
ESCAPE   OFF
EXCARDET OFF/OFF
EXTMODEM OFF
FLOW     ON
FILTER   OFF
FRACK    9/3
FSKINV   OFF
FULLDUP  OFF
GATEWAY  OFF
HBAUD    1200
HEADERLN OFF
HID      OFF/OFF
INVERT   OFF
KAMPORT  HF
KISSMODE OFF
LCOK     ON
LCRTTY   OFF
LCSTREAM ON
LFADD    OFF
LLIST    OFF
LOWTONES OFF
MONITOR  ON/ON
MALL     ON/ON
MARK     1400     <--- with the mark at 1400 and space at 1600 we can have
MAXFRAME 1/4           the packet signal centered in the assigned channel
MAXUSERS 0/0           and not have to change frequency to switch to voice.
MBEACON  ON/ON
MCON     OFF/OFF
MCOM     OFF/OFF
MRESP    OFF/OFF
MRPT     OFF/OFF
MSTAMP   OFF
MYCALL   AFA1CY-1/AFA1CY-4
MYALIAS  AFA1CY-2/AFA1CY-2
MYNODE   AFA1CY-3
MYPBBS   AFA1CY-15
MYGATE   NNJ
MYSELCAL AACY
NDMON    OFF
NEWMODE  OFF
NOMODE   OFF
NUCR     0
NULF     0
NUMNODES 0
PACLEN   40/128
PACTIME  AFTER 14
PARITY   4
PASS     $16
PASSALL  OFF/OFF
PBBS     25      <------------By having the pbbs activated at max size I have
PBMON    OFF                  all but eliminated timeout problems by having the
PERSIST  255/255              pbbs feed the data to the KAM a little at a time.
PID      OFF/OFF              (You don't have to tell anyone the call of your
PMODE    NONE                  personal bbs)
RBAUD    45
REDISPLA $12
RELINK   OFF
RESPTIME 12/12
RETRY    10/12
RING     OFF
SCREENL  80
SENDPAC  $7F
SHIFT    170
SLOTTIME 5/5
SPACE    1600
START    $00
STATSHRT OFF
STOP     $00
STREAMSW $00/$00
STREAMCA OFF
STREAMDB OFF
STREAMEV OFF
SUPLIST  OFF
SUPCALLS NONE
TRACE    OFF
TRFLOW   OFF
TXDELAY  90/90
TXDAMTOR 5
TXFLOW   OFF
UNPROTO  AFQ/PBBS VIA NJXP06
USERS    1/1
USOS     ON
XFLOW    OFF
XMITECHO OFF
XOFF     $00
XON      $00

I would like to thank Terry Glagowski W1TR, for his assistance in setting up
these parameters. Between his knowledge of the KAM and mine of PRMBS, we were
able to make this work.

Dave Webb WB2HVF