From wang!elf.wang.com!ucsd.edu!info-hams-relay Sat Mar 23 02:42:40 1991 remote from tosspot Received: by tosspot (1.63/waf) via UUCP; Sat, 23 Mar 91 09:47:06 EST for lee Received: from somewhere by elf.wang.com id aa04310; Sat, 23 Mar 91 2:42:39 GMT Received: from ucsd.edu by relay1.UU.NET with SMTP (5.61/UUNET-shadow-mx) id AA02580; Fri, 22 Mar 91 20:34:05 -0500 Received: by ucsd.edu; id AA04773 sendmail 5.64/UCSD-2.1-sun Fri, 22 Mar 91 13:10:35 -0800 for brian Received: by ucsd.edu; id AA04716 sendmail 5.64/UCSD-2.1-sun Fri, 22 Mar 91 13:10:14 -0800 for /usr/lib/sendmail -oc -odb -oQ/var/spool/lqueue -oi -finfo-hams-relay info-hams-list Message-Id: <9103222110.AA04716@ucsd.edu> Date: Fri, 22 Mar 91 13:10:12 PST From: Info-Hams Mailing List and Newsgroup Reply-To: Info-Hams@ucsd.edu Subject: Info-Hams Digest V91 #221 To: Info-Hams@ucsd.edu Info-Hams Digest Fri, 22 Mar 91 Volume 91 : Issue 221 Today's Topics: A 2m rig at Radio Shack? Antenna Question antique radio's age? Anybody out there ever fixed a microwave oven (2 msgs) Any KW 2000B owners out there ? Computer QRM Fun with Balloons and long wires! Ham interference on Cable TV? (2 msgs) Help with Tektronixs 661 scope, General Radio Co. connectors. Hints & Kinks for taking the General code test KNWD TS-430S problem Need info on Knwd. TS-900 tcvr! New Technician Frequencies phone stuff in cw bands Reading Presence of Signal from ICOM R7000 Serial Port? SW Monitors Needed in Middle East Region WEATHER FAX ON PC'S When is the contest???? Send Replies or notes for publication to: Send subscription requests to: Problems you can't solve otherwise to brian@ucsd.edu. Archives of past issues of the Info-Hams Digest are available (by FTP only) from UCSD.Edu in directory "mailarchives/info-hams". We trust that readers are intelligent enough to realize that all text herein consists of personal comments and does not represent the official policies or positions of any party. Your mileage may vary. So there. ---------------------------------------------------------------------- Date: 15 Mar 91 15:05:00 GMT From: swrinde!elroy.jpl.nasa.gov!usc!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!csn!boulder!bohemia!f510.n5000.z200.METRONET.ORG!Gary.Box@ucsd.edu Subject: A 2m rig at Radio Shack? To: info-hams@ucsd.edu Dana. I think they probobly will once the no-code population increases. The other scenereo is that new hams populate 2M and the older ones move to other bands on their own. A better solution would be more multi-band hardware, doing to the hi bands what multi-band HF rigs bring to low bands. I don;t think any of these options are bad for the hobby. --- * Origin: The Computer Lab (200:5000/510) -- ============================================================================= Gary Box - via MetroNet node 200:5000/301 The Bohemia BBS System, Boulder Colorado (303)449-8946 UUCP: Gary.Box@f510.n5000.z200.METRONET.ORG or : ...!boulder!bohemia.METRONET.ORG!510!Gary.Box ============================================================================= ------------------------------ Date: 14 Mar 91 15:07:39 GMT From: usc!wuarchive!gumby!vela!argo.acs.oakland.edu!SDKUO@ucsd.edu Subject: Antenna Question To: info-hams@ucsd.edu In article <1991Mar13.224233.3352@vax5.cit.cornell.edu>, inuy@vax5.cit.cornell.edu writes: >I have an antenna question for all of you who are good at that type >of thing. I have been looking over different types of antenna, and >I think I want to build a yagi beam. I have figured out all the >dimensions of it, but there is one problem. The book has the >impedance listed as 75 ohms, but my (a VHF scanner) receiver has a >50 ohm input impedance. Will this make much of a difference to a >receiver? If it will degrade the performance of the antenna, is >there a simple way to transform the 75 ohm impedance from the >antenna to 50 ohms? >--Matthew Kleinmann Will hooking up a 75 ohm antenna to a 50 ohm input make a difference? Not really for receiving purposes, 75 ohm is close enough. In fact, 75 ohm coax cable (RG/59?) that is designed for VHF/UHF TVs might be cheaper than buying RG/58 which is not as good in the VHF/UHF spectrum. Hope this helps, Steven D. Kuo Mini computer address: sdkuo@argo.acs.oakland.edu Micro computer address: sdkuo@sycom.UUCP Oakland University, Rochester, Michigan, USA "Go Green, Go MSU" ------------------------------ Date: 22 Mar 91 16:48:48 GMT From: chapman@cu-arpa.cs.cornell.edu Subject: antique radio's age? To: info-hams@ucsd.edu This isn't about amateur radio, so hit 'n' if you aren't an antique radio person, but I figured this group is about my best bet for finding people who know about old radios. I'm trying to find out when Zenith Radio Corp. made the model 410 broadcast receiver. Here is what I know that might help date it: Circuit is super-heterodyne (when was that invented? 30's?) I brushed the dust off some of the tubes: type 59, type 80 (80 is a rectifier?) The cabinet is 40" tall, 20" wide, 15" deep, with what I would call a cross between "Gothic" and "Art Nouveau" styling. Thanks to anyone who can help, Richard Chapman ------------------------------ Date: 19 Mar 91 20:24:27 GMT From: agate!apple!usc!rpi!zaphod.mps.ohio-state.edu!caen!uflorida!mailer.cc.fsu.edu!sun13!murray@ucbvax.berkeley.edu Subject: Anybody out there ever fixed a microwave oven To: info-hams@ucsd.edu In article <4P02y1w163w@shark.cs.fau.edu> terryb.bbs@shark.cs.fau.edu (terry bohning) writes: > >I don't know if this has been posted yet, but there is at leas 1 book >on Microwave Oven Repair: "Practical Microwave Oven Repair", >Homer L. Davidson, 1984, TAB Books, Blue Ridge Summit, PA. Er, I've seen a few TAB books that were just rife with errors. In one basic electronics book I happened to pick up, they couldn't even get the formulas for series and parallel capacitances correct... ...Not sure I'd trust them to tell me how to mess around with HV and high-power RF... -- *Standard Disclaimers Apply*| ---Get Out Of HELL Free!--- John R. Murray |The bearer of this card is entitled to forgive murray@vsjrm.scri.fsu.edu |Himself of all Sins, Errors and Transgressions. Supercomputer Research Inst.| -- D. Owen Rowley ------------------------------ Date: 19 Mar 91 00:37:26 GMT From: swrinde!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac, Subject: Anybody out there ever fixed a microwave oven To: info-hams@ucsd.edu In article <91077.142209FC138001@ysub.ysu.edu> FC138001@ysub.ysu.edu (Phil Munro) writes: > > My recomendation is *DON'T MESS WITH YOUR MICROWAVE* unless you are >interested in finding out what cataracts are like. Stray microwave >energy is very dangerous to your eyes!!!! And from the questions >asked in this post it looks like the writer does not understand this! > But why would a routine electrical repair have any effect on this? He's talking about replacing a major component, such as the magnetron. This is a standard kind of repair and has no effect on the seals, nor does it expose the technician to any hazard for the simple reason that the microwave oven is never powered on during repair. -- ------------------------------------------------------- Michael A. Covington | Artificial Intelligence Programs The University of Georgia | Athens, GA 30602 U.S.A. ------------------------------------------------------- ------------------------------ Date: 21 Mar 91 21:28:42 GMT From: swrinde!elroy.jpl.nasa.gov!usc!snorkelwacker.mit.edu!thunder.mcrcim.mcgill.edu!bonnie.concordia.ca!s3!mlefebvr@ucsd.edu Subject: Any KW 2000B owners out there ? To: info-hams@ucsd.edu I would like to hear from hams who operate a KW Electronics model 2000B hf transceiver. I just got one and I would like to learn more about its stronger and weaker points. I will e-mail back or post a summary depending on the number of replies I receive. Thanks, Marc VE2HQI -- Marc Lefebvre, IREQ: Institut de Recherche d'Hydro-Quebec Analyste Ressources Informatiques 1802 Montee Ste-Julie, Varennes, Prov. Quebec, CANADA J3X 1S1. mlefebvr@ireq.hydro.qc.ca Tel: 514 652-8554 fax: 514 652-8555 ------------------------------ Date: 21 Mar 91 16:43:59 GMT From: swrinde!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu@ucsd.edu Subject: Computer QRM To: info-hams@ucsd.edu Hi. Further investigation of my monitor-related QRM reveals the following interesting facts: 1. The noise is directly proportional to the amount of data visible on the screen. 2. The noise goes away if I unplug the data cable coming that connects the computer and the monitor. 3. The noise DOES NOT go away if I unplug the monitor power cord. 4. The noise is reduced to a lower level if I place my hands in certain positions on the exterior surface of the monitor unit. (You've heard of "laying on of hands"? ;-) Maybe these facts can help someone out there suggest corrective action. I tried the snap-on chokes from Radio Shack; absolutely no improvement whatsoever. Thanks in advance, Kip Ingram N5RYK kipper@ccwf.cc.utexas.edu (512)471-4496 ------------------------------ Date: 15 Mar 91 17:20:30 GMT From: swrinde!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!carlson@ucsd.edu Subject: Fun with Balloons and long wires! To: info-hams@ucsd.edu About 4 years ago the group I do F.D. with, the Fox River Radio League in Aurora Illinois, tried this with great success on 80 meters. We used stranded #18 and 6 4ft diameter weather balloons. The Helium was given to us by a local (welding/industrial) gas supplier (to finish off a tank). The six balloons were held together with a used tennis net. Managing the filling of the balloons and rigging of the antenna was as much fun as operating with it. During the day we had calm winds, but as night progressed a light and variable 5 knot wind put the antenna almost horizontal ! When it was up it worked like gang-busters compared with a Butternut, and of course it was far more efficient than a dipole hung between trees; remember- most locations dont allow for an OPTIMUM antenna height on 80 :*} .... As long as you are a good distance from overhead lines, airports and the sort - Its a lot of fun!! dont forget to include a conterpoise. 73 Kermit W9XA p.s. if you can - its fun to try reeling the line in and out to see if you can play with the feed impedance and pattern. a good matchbox is a must......try 160 too! ------------------------------ Date: 14 Mar 91 19:43:34 GMT From: swrinde!cs.utexas.edu!convex!texsun!letni!rwsys!kf5iw!k5qwb!lrk@ucsd.edu Subject: Ham interference on Cable TV? To: info-hams@ucsd.edu mrbg8552@uxa.cso.uiuc.edu (Matt Byer) writes: > My friend's cable tv gets interrupted several times a week by > what I think are ham operators. I can get parts of a callsign > > Matthew Byer > Champaign, Illinois, USA > mrbg8552@uxa.cso.uiuc.edu This works both ways. The cable company is not supposed to leak signals out or let signals in. If you can find the ham, he may know how to handle it. He may be wondering about the TV signals. Most likely, it's not the cable but something in your friends house since the cable equipment is usually much better than the home entertainment stuff. Check his cables and make notes of which channels and devices he gets interference on and try another TV in the same position. The hams will probably be a good source of help but they need all the clues to figure out what's happening. --------- lrk@k5qwb.UUCP lrk%k5qwb@kf5iw.UUCP 73, utacfd.utarl.edu!letni!rwsys!kf5iw!k5qwb!lrk Lyn Kennedy K5QWB @ N5LDD.#NTX.TX.US P.O. Box 5133, Ovilla, TX, USA 75154 -------- "We have met the enemy and they are us." Pogo ----------------- ------------------------------ Date: 20 Mar 91 19:29:54 GMT From: newstop!jethro!caliban.Sun.COM!tjonz@sun.com Subject: Ham interference on Cable TV? To: info-hams@ucsd.edu In article <371@platypus.uofs.edu> bill@platypus.uofs.edu (Bill Gunshannon) writes: > Because the channel experiencing interference is Cable Channel 18, > which just happens to overlap the 2 meter band, I don't think > anything the cable company is going to will relieve the problem. My local cable company was clever enough not to use chanel 18. They were not, however, clever enough to avoid channel 19, which everlaps with the local police band at 154 MHz. Every time the police repeater kicks in, I get a lovely herring bone pattern on channel 19 that resembles an expensive tweed jacket. An if the police have a cruiser in the neighborhood when I'm watching channel 19, I might as well be watching an old rerun of Adam-12. Todd, KB6JXT ------------------------------ Date: 20 Mar 91 06:48:55 GMT From: ucselx!bionet!uwm.edu!caen!sdd.hp.com!spool.mu.edu!cs.umn.edu!talon.UCS.ORST.EDU!usenet!@ucsd.edu Subject: Help with Tektronixs 661 scope, General Radio Co. connectors. To: info-hams@ucsd.edu I have acquired a Tektronics Type 661 oscilloscope but have no probes for it. It doesn't use the standard BNC for probes but instead has something called a General Radio Universal Connector. This connector looks something like a 4 petal flower about 5/8 inch diameter & it sticks out about 3/4 inch from the front of the scope, it also has a little stem-like deal in the center. Does anyone have an address for General Radio Co., now called GenRad? Any source of these connectors would be helpful. I would also like to buy a manual for the Tek 661 scope if anyone has one. Dean Youngquist youngqd@nyssa.cs.orst.edu 428 NW 9th St. Amateur Radio Operator N7LPE Corvallis, Oregon 97330 Tel. (503) 753-7646 or 757-0335 ------------------------------ Date: 20 Mar 91 17:00:52 GMT From: zephyr.ens.tek.com!tektronix!sequent!mntgfx!mrosneck@beaver.cs.washington.edu Subject: Hints & Kinks for taking the General code test To: info-hams@ucsd.edu My father is going to (finally) upgrade to General. I understand how the new volunteer examiner system works but I'm not sure how the code tests are actually structured these days. The last time I took a code test I got to sit in front of the FCC and sweat a lot. What sort of a test should he expect? How is it graded? Is a sending test still required? Are there any hints for taking the test? I believe there was a thread on this a few months ago. I'd appreciate it if someone could summarize the comments for me. Thanks Mark -- Mark Rosneck (503) 685-1340 KB0US Mentor Graphics Corp., 8005 S.W. Boeckman Road, Wilsonville, OR 97070 ...!{sequent,tessi,apollo}!mntgfx!mrosneck OR mrosneck@MENTORG.COM ------------------------------ Date: 18 Mar 91 15:45:41 GMT From: uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!wa4mei!ke4zv!gary@ames.arpa Subject: KNWD TS-430S problem To: info-hams@ucsd.edu In article <26530001@hpldsla.sid.hp.com> bruno@hpldsla.sid.hp.com (Bruno Bienenfeild) writes: > Following are the symptoms: during CW/SSB transmission, the power > output dropps arbitrarily to somewhere between 2-3 watts. > If I continue to transmit it returns to full power and after awhile > it drops down again. This sounds like a temperature related intermittant caused by RF "hot spotting". The culprit is likely a "chip" coupling capacitor or the emitter bonding of the final RF transistor. The most likely culprit is an output coupling capacitor. Open up your RF deck and while running the rig into a dummy, hit suspects with Instant Freeze spray. The problem will instantly go away when you hit the right part. Then replace it. Gary KE4ZV ------------------------------ Date: 15 Mar 91 13:44:43 GMT From: usc!elroy.jpl.nasa.gov!sdd.hp.com!spool.mu.edu!snorkelwacker.mit.edu!bloom-beacon!eru!hagbard!sunic!news.funet.fi!hydra!cc.helsinki.fi!stickler@ucsd.edu Subject: Need info on Knwd. TS-900 tcvr! To: info-hams@ucsd.edu I'm considering purchasing a used Kenwood TS-900 and would like some opinions on the model from any experienced owners/users. The rig itself is in near-mint condition, so age is not so much of a factor as whether or not it is (was) a good radio given the era when it was manufactured. The external/additional VFO and power supply/speaker are included in the package, so any comments on their operation in addition to the tranceiver would also be helpful. I would also like to know how hard it would be to find (new) replacement tubes. Thanks, ////////////////////////////////////////////////////////////////////// Patrick Stickler University of Helsinki stickler@cc.helsinki.fi ////////////////////////////////////////////////////////////////////// ------------------------------ Date: 19 Mar 91 05:03:31 GMT From: swrinde!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac, Subject: New Technician Frequencies To: info-hams@ucsd.edu I plan to get my Technician class license soon by studying the old questions that I have (01nov89). The contents is pretty much the same from what I've heard, but I think the frequencies have changed. Here is the amateur band that I have effective 01-Nov-89. If someone could please send me the changes in band(s) I would much appriciate it. 3700-3750 kHz/CW 7100-7150 kHz/CW 21.1-21.2 MHz/CW 28.1-28.5 MHz/CW 28.3-28.5 MHz/Telephony 50.0-54.0 MHz/CW 50.1-54.0 MHz/Telephony 144.0-148.0 MHz/CW 144.1-148.0 MHz/All 220.0-225.0 MHz/All (that has changed I think?) 420.0-450.0 MHz/All (this can't be right?) 902.0-928.0 MHz/All 1240.0-1300.0 MHz/All please send email or reply, thanks, Steven D. Kuo sdkuo@argo.acs.oakland.edu Oakland University, Rochester, Michigan, USA "Go Green, Go MSU" ------------------------------ Date: 21 Mar 91 13:22:33 GMT From: tut.cis.ohio-state.edu!magnus.acs.ohio-state.edu!zaphod.mps.ohio-state.edu!wuarchive!udel!brahms.udel.edu!skymaste@ucbvax.berkeley.edu Subject: phone stuff in cw bands To: info-hams@ucsd.edu > >And BTW, did I ever tell you about the Ws and Ks stomping on our >nightly traffic net @ 3740 (Alberta Public Safety Net)? CW signals ^^^^ I don't hear them verry loudly, her in Delaware, but I am kind of curious about how they can be here just about every night of the week? Is this another case of FCC sitting on their lazy buts, or do these people have special privelages. I could burn right through them with CW; but that wouln't be nice, and there is plenty of room to QSY. Paul -- "Let there be light" -- Bomb #22 -- Starship Dark Star Paul Masters N3IRU (The ham license arived 12/04/90) ------------------------------ Date: 19 Mar 91 22:38:52 GMT From: melpar!toppin@uunet.uu.net Subject: Reading Presence of Signal from ICOM R7000 Serial Port? To: info-hams@ucsd.edu I have an ICOM R7000 with a serial interface that I am writing Unix/C software for and have run into a problem. I am able to command it to tune without any trouble but have been unable to determine if the receiver has found a signal. There appears to be no documented command that asks the receiver if a signal has broken squelch. If anyone has any experience with this or any tips please post to this group or drop me a line. I know this is possible as there are several vendor software packages that are used to control the R7000 but I don't know if they have made a hardware mod to detect a signal. I am also interested in general in communicating with any other ICOM users or people writing receiver control software. I was on this group a little while late last year but have been away for a few months. thanks Doug Toppin uunet!melpar!toppin ------------------------------ Date: 18 Mar 91 16:24:01 GMT From: wshb!cee@uunet.uu.net Subject: SW Monitors Needed in Middle East Region To: info-hams@ucsd.edu Hi, Netlanders. I have posted this request before, but unfortunately I was unable to contact the respondent in Cairo who answered our request. The World Service of The Christian Science Monitor is searching for Volunteer Monitors to monitor our shortwave broadcasts into the Middle East region. These volunteers will recieve Report Forms, Schedules, QSL cards and bumper stickers, and we will reimburse the Monitor for his/her postal expenses. If anyone is interested in joining our selct group of worldwide Monitors, please e-mail me, or write to Primary Monitor Reports WSHB Rt. 2, Box 107-A Pineland, S. C. 29934 USA -- ***************************************************************************** C. Ed Evans, Senior Station Manager, CSMS * cee@wshb.csms.com (803)625-4880 WSHB, Cypress Creek, SC * WCSN, Scotts Corner, ME * KHBI, Saipan, Mariana I. ***************************************************************************** ------------------------------ Date: 22 Mar 91 15:23:54 GMT From: news-mail-gateway@ucsd.edu Subject: WEATHER FAX ON PC'S To: info-hams@ucsd.edu I am looking for hardware/software solutions to receiving weather fax on PC's. What I need the hardware/software to do is receive HF weather charts from broadcast and/or landline. Some other criteria that I need to be met is that the system must be able to receive and save weather fax charts and to automatically save the individual charts to files without operator intervention. The system must be able to selectivly pick the charts it wants to save to file. The system must be able to run in background and to be able to print out a file while receiving incoming charts. If any one out there has any info you can get me at navoea@tecnet1.jcte.jcs.mil /Dwight/ ------------------------------ Date: 22 Mar 91 01:15:04 GMT From: swrinde!zaphod.mps.ohio-state.edu!ub!dsinc!cs.widener.edu!netnews.upenn.edu!eniac.seas.upenn.edu!depolo@ucsd.edu Subject: When is the contest???? To: info-hams@ucsd.edu A message was posted to rec.ham-radio regarding this by another person, so I'm posting a similar question here to try to find the answer. QST reports that CQ contest is this weekend (23rd and 24th). Others have said that the dates in QST are wrong. CQ magazine (the sponsor) said that it was the 30th and the 31st. This seems strange, because that's Easter weekend. Does anybody know which is the correct weekend? --- Jeff -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Jeff DePolo N3HBZ/AE Twisted Pair: (215) 386-7199 depolo@eniac.seas.upenn.edu RF: 146.685- 442.70+ 144.455s (Philadelphia) University of Pennsylvania Carrier Pigeon: 420 S. 42nd St. Phila PA 19104 ------------------------------ Date: 19 Mar 91 01:16:43 GMT From: pyramid!infmx!randall@hplabs.hpl.hp.com To: info-hams@ucsd.edu References <1991Mar12.080943.10901@nntp-server.caltech.edu>, <4822@eastapps.East.Sun.COM>, <745@chiton.ucsd.edu>hpl Subject : Freebanders (was: Re: Frequently Asked Questions for Amateur Radio) In article <745@chiton.ucsd.edu> rec@chiton (Richard Currier) writes: > >Don't stop at 27.990...Listen all the way up into the ham bands at least to >28.150. The CW portion of the ten meter band is virtually unusable on the >weekends when the band is open... I don't know of any other solution to the problem except one: the FCC needs to catch the people that are operating above 27.405. Hams can't "self-police" these frequencies because they're not our frequencies. The FCC must act. I'm really tired of this anti-regulation B.S. that's caused regulatory agencies to be under-funded. Richard is right: we will lose 10 meters by default if something isn't done. -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Randall Rhea Informix Software, Inc. Senior Programmer/Analyst, MIS uunet!pyramid!infmx!randall ------------------------------ Date: 19 Mar 91 17:15:22 GMT From: hayward@gargoyle.uchicago.edu To: info-hams@ucsd.edu References <1991Mar14.224017.6341@mentorg.com>, <1991Mar19.020410.2745@informix.com>, <1072@wells.UUCP>utex Subject : Re: Hints & Kinks for taking the General code test In article <1072@wells.UUCP> k3tx@wells.UUCP (Dave Heller) writes: : :1. The "example" of the questions for the code test - - ultra- simple :multiple choice - are proof ample that the V.E. program is truly a :nice way of giving away amateur licenses. : :2. Bad enough that a full minute solid copy is no longer required, : :3. Nor is the sending test - - : :4. But to permit 7 out of l0 ultra-simple choices to be a pass - - : :5. Even with the minimal knowledge and some careful guessing a 50% :score can be automatic - - : :6. 25% is automatic with pure guesssing. : :7. So, I ask, what VE group is making up tests as ridiculous :as the example given? : The ARRL VEC has announced that it will be going to multiple choice over the next few months. -- Peter B. Hayward University of Maine WX9T ------------------------------ End of Info-Hams Digest ******************************