





                                                            Nov 02, 1988
            
                 
                         READ THIS BEFORE STARTING NETWORK:
            
            
            NETWORK is an electronic circuit analysis program for ladder
            networks.  It will provide a tabular output of Insertion
            Loss, Return Loss, Phase, VSWR, Reflection Coefficient, and
            Real and Imaginary Input Impedances.  There is a high-
            resolution plotting capability for each of these parameters.
            
            Various filters or impedance matching networks may be
            quickly analyzed and plotted.  These circuit files may then
            be saved or loaded from disk.
            
            NETWORK requires at least 256K of RAM and a CGA, EGA, or
            Hercules Graphics Card.  The VGA may be used in CGA or EGA
            modes.
            
            
                                  FILE DESCRIPTION
            
            The following files may be found within the archive,
            NETWORK.ARC:
            
            README.TXT - This is the current file you are reading.
            
            REGISTER.TXT - This ASCII text file describes the
            registration procedures and site licensing requirements.  A
            site license form is included.
            
            MANUAL.TXT - This is an ASCII text file of the complete
            users manual for NETWORK.  Turn your printer on, set the
            print head at the top of the page, and type the following
            command at your computers prompt character (>A or >C,
            typical):
                       TYPE MANUAL.TXT > PRN    <ENTER>
            
            This assumes that your printer is connected as device LPT1.
            
            SETUPNET.EXE - This is the setup program for NETWORK.  Start
            it by typing SETUPNET at the prompt.  Run this first in
            order to properly configure NETWORK for the desired data
            disk drive, video graphics card, color scheme, and default
            units of frequency/ohms/capacitance/inductance.  NETWORK
            will run best with CGA or EGA graphics adapters.
            
            NETWORK.EXE - This is the NETWORK program.  Start it by
            typing NETWORK at the prompt.
















            
            INITIAL.NET - This is the initialization file for the
            NETWORK program.  It contains the setup information as
            defined by the program SETUPNET.EXE.
            
            LPMATCH.CIR, TLINE3.CIR, BBMATCH.CIR, and CAUER.CIR - These
            are the example circuit files as described in the user
            manual.
            
            EPSON.COM - This is a public domain program which will allow
            the printing of CGA or EGA graphics screens on EPSON, or
            EPSON compatible, printers.