#
#	PMP Configuration file
#
#	For PMP Version 0.93 (beta)
#
#

#
#  MYCALL	Operator's callsign
#
mycall n8kei

#
#  PTHRESH	The max I packet size for retries.  If the unACKed packet
#		is longer than PTHRESH, a RR/Poll is sent, else the packet
#		is repeated (ala AX.25 Version 1.0)
pthresh	20

#
#  TXDELAY	The wait after keying up and before transmitting starts
#               (in milliseconds)
#
txdelay 250

#
#  RETRY	Max number of retries before a connection is dropped.
#
retry 16

#
#  FRACK	Parameter used to calculate the timeout time before retrying
#		(in seconds)
#
frack 5

#
# CHECK		Link keep-alive timer (in seconds).  After this many seconds
#		of inactivity, the remote node is polled.
#
check	300

#
# MAXFRAME	Specifies the maximum number of frames outstanding before
#		an ACK is expected.
maxframe 1

#
#  PACLEN	Sets the maximum packet length in bytes, must be between
#		1 and 256.
paclen	128

#
#  CLOCKSKEW	Enables or disables clock skewing.  When running PMP, the
#		BIOS clock will loose time.  If CLOCKSKEW is enabled, PMP
#		attempts to correct this by speeding the BIOS clock slightly.
#		A zero value disables, and a non-zero value enables.
clockskew 1

#
# Screen attributes
#
#	These five parameters set the screen colors/attributes
#	(the default settings are for a monochrome display)
#
normal	3
inverse 112
status  112
bright	11
message 112

#
#   SOUND	Enables/disables sound.  A one value enables, a zero value
#		disables.
#
sound	1

#
#   CAPTURE	Specifies the size, in bytes, of the RAM capture buffer.
#		After this buffer is filled, the contents are flushed to
#		disk.  Larger values will minimize disk writes.  Values
#		should be a multiple of a MS-DOS sector size (512 bytes).
capture 4096

#
#   CTEXT	Text sent out first during an incoming connect.  You can
#		have up to 10 lines in a CTEXT message.
#
ctext Hello!  If I'm not around, please leave a message.
ctext (I'm running a homebrew TNC setup.  There may be bugs!)
ctext

#
#  BTEXT	Text sent during a beacon
#
btext +++++ PMP Version 0.93 (beta test) +++++

#
#  BADDR	Address (and path) to which beacons are sent.
#
baddr cq v w2cxm-1

#
#  BEACON	Sets beacon interval (in seconds).  A beacon interval of zero
#		turns beaconing off.
#
beacon 0

#
#  PTTPORT	Sets the PTT port, bit mask, and active level.
#
pttport 0x378 2 0

#
#  TXPORT	Sets the TX data port and bit mask.
#
txport 0x378 1

#
#  CDPORT	Sets the CD port, bit mask, and active level.
#
cdport 0x379 0x80 0

#
#  RXPORT	Sets the RX port and bit mask.
#
rxport 0x379 8

#
#  INIT		Sends initialzing values to ports.  This statement is useful
#		to initialize any necessary hardware before starting PMP
#		(like mini-modems powered from spare output bits).
init 0x378 0xff

#
#  DEFINE	Function key (F1-F10) definitions.
#
define f1 ~cn8kei v w2cxm-1^m
define f2 lm^ml^m
define f3 CQ +++++ CQ CQ de N8KEI Ithaca, NY (Connect to N8KEI-15) +++++^m
define f4 ~ccor144 v ith^m

#
#  AUTOWRAP	Defines the column at which autowrap is active.  A value of
#		zero disables autowrap.
#
autowrap	78