TELECOM Digest Wed, 5 Jan 94 15:30:00 CST Volume 14 : Issue 8 Inside This Issue: Editor: Patrick A. Townson Bellcore FTP Site For ISDN Information (William H. Sohl) Communication Over Power Lines? (Michael Duane) Telephone Answering Machine Question (Ray Normandeau) Federal Telemarketing Laws (Bob Rankin) Access Charges if LD Carrier = Telco? (Charles F. Hofacker) What Ways Can Three Regional Offices Share One Phone Number? (J. Ortiz) California ANI Question (Phydeaux) Quick Question About Caller ID (Ashish Parikh) SLIP Information Needed (Lance M. Cottrell) Long Distance Dial/Pay Methods (Terry Brainerd Chadwick) Calling Card Statistics Wanted (Terry Brainerd Chadwick) Merlin Question (Vince Dugar) Cellular Phones Come to Belgium/Pactel (Massimo Mauro) How Are VCR Plus+ Numbers Generated? (Dan Cromer) Emergency Only Cellphone (Dale Farmer) Best Remote Software? (Joseph Ferguson) Best Modem For Developing World (David Davidson) Help Needed With V.42bis (bobphin@nbnet.nb.ca) Re: New Service From NY Tel - 'Reverse Directory' (Stephen Ng) Re: New Service From NY Tel - 'Reverse Directory' (Dave Niebuhr) Re: TDD Software Wanted (Don Perrott) Re: Caller ID/911 Seattle and Article Recommendation (Steve Forrette) Re: Being Paged by Mystery 800 Number (Timothy S. Shea) TELECOM Digest is an electronic journal devoted mostly but not exclusively to telecommunications topics. It is circulated anywhere there is email, in addition to various telecom forums on a variety of public service systems and networks including Compuserve and GEnie. Subscriptions are available at no charge to qualified organizations and individual readers. Write and tell us how you qualify: * telecom-request@eecs.nwu.edu * The Digest is compilation-copyrighted by Patrick Townson Associates of Skokie, Illinois USA. We provide telecom consultation services and long distance resale services including calling cards and 800 numbers. To reach us: Post Office Box 1570, Chicago, IL 60690 or by phone at 708-329-0571 and fax at 708-329-0572. Email: ptownson@townson.com. ** Article submission address only: telecom@eecs.nwu.edu ** Our archives are located at lcs.mit.edu and are available by using anonymous ftp. The archives can also be accessed using our email information service. For a copy of a helpful file explaining how to use the information service, just ask. TELECOM Digest is gatewayed to Usenet where it appears as the moderated newsgroup comp.dcom.telecom. It has no connection with the unmoderated Usenet newsgroup comp.dcom.telecom.tech whose mailing list "Telecom-Tech Digest" shares archives resources at lcs.mit.edu for the convenience of users. Please *DO NOT* cross post articles between the groups. ---------------------------------------------------------------------- From: whs70@cc.bellcore.com (sohl,william h) Date: 5 Jan 1994 14:01 EST Subject: Bellcore FTP site for ISDN Information Pat, The following announces the availability of ISDN documentation via FTP from Bellcore. Additional documentation will be added to the FTP site as we progress in 1994. Thanks, Bill Sohl and Barbara Shaw - Bellcore ISDN Hotline 1-800-992-ISDN -------------------Bellcore FTP ISDN Info Announcement----------- Bellcore's National ISDN Hotline Announces: Availability of National ISDN Information over Internet Information about National ISDN is now available by anonymous FTP (File Transfer Protocol) over the Internet at host "info.bellcore.com" FTP allows the retrieval of formatted documents and software. The files are available in PostScript through anonymous FTP from "info.bellcore.com" in the /pub/ISDN sub directory. I M P O R T A N T: Many of the files are large. It is essential that you first get the README (the upper case is important) file for detailed information on retrieving various files associated with documents. The following text describes a typical anonymous FTP session: system: ftp info.bellcore.com Connected to info. 220 info FTP server (SunOS 4.1) ready. Name: anonymous 331 Guest login ok, send ident as password. Password: 230 Guest login ok, access restrictions apply. ftp> cd /pub/ISDN 250 CWD command successful. ftp> mget README mget README? yes 200 PORT command successful. 150 ASCII data connection for README (8758 bytes). 226 ASCII Transfer complete. local: README remote: README 8943 bytes received in 0.19 seconds (46 Kbytes/s) ftp> quit 221 Goodbye. represents pressing the "enter" or "return" key on your computer keyboard. The README file is in ASCII format and may be read on any word processor. The other files in the directory are in PostScript format and may be downloaded as needed by using the "mget" command while in the FTP. The PostScript files may be printed on a PostScript printer by using the "lprr" command. A typical Post Script print command may look like: lpr -P -h -v where: represents printer name on your network, and represents a PostScript file. '-h' corresponds to the option of suppressing the printing of burst page while '-v' corresponds to the option of printing raster image, i.e., PostScript. Please note that the printer must support PostScript imaging model in order to print these files. If you have problems or you'd like to comment on the information stored at this site or wish to make recommendations for future enhancements, you can email us at: isdn@cc.bellcore.com Or, call us at Bellcore's National ISDN Hotline: 1-800-992-ISDN ------------------------------ From: duanem@apollo4.eng.sematech.org (Michael Duane) Subject: Communication Over Power Lines? Date: 5 Jan 1994 18:10:01 GMT Organization: SEMATECH, Austin Reply-To: michael_duane@sematech.org I received the following question from a friend. Post replies here, or mail directly to thausken@ota.gov. "This is an all points bulletin to answer an question we were pondering here the other day. The question is "Can the power company send telephone or radio signals over the power lines?" Never mind for the moment any switching problems -- just consider broadcast for now. (There *is* a proposal that power companies install fiber optic cable to homes to help monitor power usage, and in turn sell the capacity to the phone companies. I am asking something different. I am interested in using the actual power lines themselves. My campus radio station used power lines to send the local FM channel, but I don't know how they did it.) The questions are: 1. What is the cutoff frequency of the power grid? Or better, what is the bandwidth vs. distance curve? This is a basic two wire conductor problem but I don't know things like the skin resistance, etc. 2. How do you mix the frequencies? Is the 60 Hz line the carrier, mixed with the signal? Or can you combine them some other way? Any help is appreciated!! Please pass the problem on if you cannot help. Tom michael.duane@sematech.org [TELECOM Digest Editor's Note: You might be interested to know that the telephones inside the cars on the subway in Chicago used by conductors and motormen to communicate with their dispatcher used to operate via the 'third rail' (power supply for the trains). I guess you can talk over the the third rail quite nicely. Lately they have used UHF radios, but some of the phones in the fare collection booths used on the internal CTA phone system are still interconnected via the third rail. Are the connections noisy you ask? Are they? Are they!! But it works. PAT] ------------------------------ From: factory!ray.normandeau@uu6.psi.com Subject: Telephone Answering Machine Question Date: 4 Jan 94 22:15:00 GMT Organization: Invention Factory's BBS - New York City, NY - 212-274-8298v.32bis Reply-To: ray.normandeau@factory.com (Ray Normandeau) In December, {Back Stage} newspaper in NYC had the following ad: "EARN $50 While staying at home Call 289-6048 for info" The phone is in the 212 area code. I have called several times, at least once a week for the last few weeks. Altho the OGM says "Please leave a message", and I think that I am leaving one, I am not sure if it is being recorded because my calls are not being returned. It has happened to me that I put my own TAD on "Outgoing Message Only" without realizing it and that people who thought they were leaving a message for me, were not as my TAD was not recording them. Is there any way to figure out if the machine at 212-289-6048 is taking my messages or not? The ad might make some people think that it is a scam, but the newspaper {Back Stage} has a VERY GOOD reputation for screening out scam ads. ------------------------------ Date: Wed, 5 Jan 94 11:48:08 EST From: Bob Rankin Subject: Federal Telemarketing Laws I just read through the archives from late 1991 looking for info on congressional action regarding automated telemarketing. I found this little excursion quite fascinating, but failed in my quest, save for a few references to Rep. Frank's appearance on NightLine discussing some proposed legislation. Kind readers, please enlighten me as to the details of whatever federal law(s) may have been passed regarding telemarketing. I'm interested to learn if *all* forms of automated outbound calling are verboten, or if it just applies to "sales" calls. For example, - A club calling members to notify them of a meeting; - A library calling to notify you of an overdue book; - An automated survey/questionnaire (for non-commercial purposes); - An announcement of a free community service; - A political party calling with a "please vote today" message; (maybe even "Press 1 if you need transportation to the polls") All these seem to be legitimate uses of automated outbound calling, since they either provide useful information/services or offer a significant labor and time savings to a caller who has no profit motive. I welcome private or public replies on this matter. Bob Rankin (r3@vnet.ibm.com) [TELECOM Digest Editor's Note: All the above examples you cite are exempt from the federal regulations. Political calls (vote today) are considered freedom of speech. The library (return our book) has a pre-existing relationship with you as does the club calling to notify you about a meeting. Announcements about free community services also come under freedom of speech. The only calls which are really regulated are those from commercial organizations with whom you have no previous business relationship. They have to follow regulations pertaining to how they call you (using automated techniques or not, etc). The others want to maintain your goodwill, so they follow the same guidelines for the most part, but are not absolutely required to follow them. PAT] ------------------------------ From: Charles F. Hofacker Subject: Access Charges if LD Carrier = Telco? Date: Wed, 5 Jan 1994 12:08:06 EST The recent announcement by MCI that they were going to compete in the local loop has made me curious about something. One of the motivations for this announcement was that MCI could then avoid 'access charges' which are I believe are paid by the long distance provider to the local telco. Since my local telco is Sprint (904-386), if I sign up for Sprint long distance also, shouldn't things be cheaper for me? Why should Sprint charge Sprint access charges? Do I have a point here or is there some regulatory reason that my logic fails? I called the Sprint Long Distance 800 number and the sales rep said he had never heard of access charges. Charlie Hofacker chofack@cob.fsu.edu [TELECOM Digest Editor's Note: Probably the 'Sprint' which handles your local loop is not the same branch of 'Sprint' which handles your long distance calls. Additionally, there is no reason why MCI *has* to not charge you the access fee once they get in the local loop business; just that they apparently choose not to. They apparently have chosen to 'do their bookkeeping' differently than Sprint. Under the law, whoever supplies/maintains the wires coming to your home is entitled to be compensated for the use of the wires in long distance calls and apparently Sprint (the division of the company supplying your local service) chooses to be compensated. Maybe MCI's gimmick will be to have slightly higher long distance rates in exchange for no local-loop charge. It all comes out the same in the end, or nearly so. PAT] ------------------------------ From: ortiz@cactus.org (J. Ortiz) Subject: What Ways Can Three Regional Offices Share One Phone Number? Organization: Capital Area Central Texas UNIX Society, Austin, Tx Date: Wed, 5 Jan 1994 17:12:26 GMT I was curious what is available from telephone services or just products on the market that would allow for a single phone number that a customer can dial and be able to connect to one of three separately located offices. Some thing like a support center, call one number and connect to the office/extension or the first available office/extension. Also could this be done with an 800 number as well? All ideas would be appreciated. I'd like to be informed before I talk to the AT&T and MCIs of the world. Thanks, joe ortiz@cactus.org [TELECOM Digest Editors's Note: Well it can most definitly be arranged with 800 service. Your 800 number would terminate different places depending on the place where the call originated. You can also have one of the regional offices be the central answering point and forward the calls one by one to the two other offices manually, then have call- forwarding on the line for after-hours connection to the other two offices. The thing is, how convenient would this be for your customers? At least two of the three regional offices would have to receive calls from *their* customers over a long distance number if all three offices used the same number (which could only be 'local service' to one of the three offices.) If you really want to pay for all the incoming calls from your customers, complainers, deadbeats and anyone else who calls the company, then go with a single 800 number which is routed on a time-of-day/day-of-week/location of call orgination basis, but I don't think you will find it terribly cost-effective. I'd say go with three 'local' numbers for each of the three offices, and internal tie-lines which allowed the receptionist/operator handling incoming calls to manually pass the call to one of the other offices if that was desired. PAT] ------------------------------ Date: Tue, 4 Jan 1994 17:21:03 -0800 From: reb@ingres.com (Phydeaux) Subject: California ANI Question Hi! In a discussion the other day, one of my colleagues told me that "ANI is illegal in California." I'm sure he meant CNID, but he understands the difference and was pretty emphatic about this. I'm sure someone here knows for sure. reb [TELECOM Digest Editor's Note: What can I tell you? Ask your colleague if he thinks 800 numbers are illegal in California. If not, then there is your answer. ANI and 800 go hand in hand. That's the way the system works. In a way, that's what makes the debate over Caller-ID so silly: People who can afford 800 numbers and insist on receiving all their calls over the 800 number have always had 'caller-ID', even in backward areas like California. :) No, ANI is not illegal in California. PAT] ------------------------------ From: aparikh@magnus.acs.ohio-state.edu (Mr. Ashish Parikh ) Subject: Quick Question About Caller ID Date: 5 Jan 1994 04:35:09 GMT Organization: The Ohio State University I am under the impression that only listed (in phonebooks) numbers get identified in one's Caller-ID system. what I mean is that for example my number is unlisted and I call a person with Caller-ID -- according to my views, my number doesn't get recognized by his/her system. My question to you intelligent/experienced folks: Is that true? Could you please briefly describe how the whole Caller-ID thing works. Thanks very much. [TELECOM Digest Editor's Note: Your views are quite seriously mistaken. CID depends on a few things, but having an unlisted or non-pub number is not one of them. First, both telephone exchanges -- that of the caller and the called party -- have to be equipped for the service. If the receiving office is equipped but the sending office is not, then sub- scribers to Caller-ID in the receiving office will get the message 'out of area' on their display when the sending office passes a call. If the sending office is equipped but the receiving office is not, then it all becomes a moot point. Now let us assume both telephone exchanges, that of caller and called party are equipped to handle Caller-ID. The calling party's ID will *always* be passed to the exchange serving the called party. Whether or not the called exchange passes the information on to the called party depends on two things: one, is the called party a subscriber to the Caller-ID service and two, did the calling party not explicitly refuse the passing of the information. By that I mean, did the calling party prepend a special code to his dialing string (typically *67) to tell *his* phone exchange to deny the information to the called party. So if both exchanges are equipped for the service and the called party subscribes to the service, he *will* get your number unless you have specifically told your exchange (to tell the other exchange) to not pass that information along. In the event you request that the inform- ation not be passed along, then the called party will receive a message on his display screen saying 'Private'. Note the difference: the display will say 'private' when the sender denies the receiver the right to the information and the display will say 'out of area' when the receiving exchange is unable (as opposed to not permitted) to supply the information. How you have your phone listed with directory assistance (or not) has no bearing on this at all. All your non-pub listing gets you is the inability of a third person to match your name with a number through the directory and/or the inability to match your number with a name/address through a cross-reference (or 'criss-cross' as they are usually called) directory. So the called party will get your *number* via Caller-ID (unless you specifically block delivery using *67), but it still remains relatively meaningless without a name/address to go with it. Note also that 'automatic call return' where that service exists is not affected by the 'private' status of Caller-ID (calls can still be returned although the return-caller will not know the number being called) and the ability to block Caller-ID via *67 is disabled when calling 911 or *any* telephone company facility or operator. In other words, you can never refuse the telephone company the right to know your number, nor can you hide from the police, etc. Likewise, your number is always known (or soon ascertained) by subscribers to toll- free 800 numbers that you may dial. You can't block that either. PAT] ------------------------------ From: sdphu3!loki@UCSD.EDU (Lance M Cottrell) Subject: SLIP Information Needed Date: 5 Jan 1994 05:38:44 GMT Organization: Physics Department, UCSD I am looking for information of setting up a SLIP on a Sun for call in. The Sun is not directly connected to the phone. I dial into a phone bank and telnet to the computer. Can I establish SLIP after I telnet? Thanks, Lance Cottrell ------------------------------ Date: Wed, 05 Jan 94 09:11:12 -0700 From: Terry Brainerd Chadwick Organization: InfoQuest! Information Services Subject: Long Distance Dial/Pay Methods How are both consumer and business long distance calling distributed between direct dialing, some form of card, collect calls, and other? ($ volume or percentage) Where is this information available? Thank you, Terry Brainerd Chadwick p00653@psilink.com ------------------------------ Date: Wed, 05 Jan 94 09:06:37 -0700 From: Terry Brainerd Chadwick Organization: InfoQuest! Information Services Subject: Calling Cards Statistics Wanted Where can I get a list of all long distance calling (including credit and debit) cards, their issuers, benefits, and rates? Also, the breakdown of card usage by consumers and business? Thank you, Terry Brainerd Chadwick p00653@psilink.com ------------------------------ From: vdugar@stortek.stortek.com (Vince Dugar) Subject: Merlin Question Organization: StorageTek Date: Wed, 5 Jan 1994 14:46:15 GMT Why does the Merlin system charge users so much (I forget now, but it's a lot) to buy a special modem adapter? Is there a cheaper solution? What about using an acoustic modem? (only want it for CompuServe mail handling, so low baud would be OK) Vince Dugar | CIS: 71011,2657 Boulder, Colorado | Opinions expressed are my own. Vince_Dugar@stortek.com | ------------------------------ Subject: Cellular Phones Come to Belgium/Pactel From: massimo@west.darkside.com (Massimo Mauro) Date: Tue, 04 Jan 94 01:14:33 PST Organization: The Dark Side of the Moon +1 408 245 SPAM With lots of fireworks to celebrate the event even this derelict (certainly as far as telecoms are concerned) country joins the cellular circus (GSM operational as from 1 Jan, 1994). Cellular phones, besides being a yuppy accessory, are unfortunately pretty useful, but cost over here an awful lot of money, as the service provider (a joint venture between the Belgian telecom and Pactel) operates a near monopoly. Can some cellular whiz kid tell me whether a cellular telephone (say, a Motorola or Nokia, for instance) purchased in the US or in Canada would be able to operate here? Given that frequency allocation and modulation scheme standardisation are done internationally (ITU), I expect it to be so. Thanks for emailing me some info, were it even to tell me I am wrong. massimo@west.darkside.com ------------------------------ Date: Wed, 05 Jan 94 05:47:29 EST From: Dan Cromer <19016007@SBACVM.SBAC.EDU> Organization: School Board of Alachua County, Gainesville, Florida Subject: How are VCR Plus+ Numbers Generated Greetings, How are VCR Plus+ code numbers, the up-to-eight digit numbers for each TV program used in programming some new VCRs and VCR-programming remotes, generated. I bought a new VCR for my folks in Lakeland, FL, to make it easy for them to set up the VCR for recording, but the VCR Plus+ codes aren't listed in their newspaper. I'd like to be able to set up a programmable calculator so that it would generate the code for them. I know there is a 900 number at 95 cents/minute, but don't think they should have to pay $1.90 every time they want to use the system. Daniel H. Cromer, Jr. Director, Information Resources School Board of Alachua County, Gainesville, Florida 19016007@sbacvm.sbac.edu [TELECOM Digest Editor's Note: Its a secret. No one knows for sure how it is done except the proprietors of the system, and they aren't going to tell. There *are* scripts around in various ftp archives sites which make a stab at this, but I understand none of them are perfect and all have a few bugs. The topic is even discussed on a regular basis in a couple of newsgroups devoted to cable television and vcr's, etc. I'm sure some readers will send you email telling you where to find the programs which have attempted to work out the VCR+ codes, but part of the reason for selling the device and operating the 900 phone number is so the proprietors can make money on the deal which I guess is the main reason their lips are zipped. PAT] ------------------------------ From: dale@access3.digex.net (Dale Farmer) Subject: Emergency Only Cellphone Date: 5 Jan 1994 13:33:42 GMT Organization: Express Access Online Communications, Greenbelt, MD USA I just ran across a flyer advertising (to me at least) a new cellular phone service. It is called HELPTEL, marketed by a company here in Massachusetts. 800 370 4445 if you want to call them yourself. What they are selling is a cell phone that has one button. You plug the phone into the cigarette lighter plug, press the HELP button and talk to some form of operator. The marketing is aimed squarely at the emergency only cellular customer. Rates are $35 per year, plus an unmentioned purchase price, plus an unmentioned per call charge. I thought you may be interested. Dale Farmer ------------------------------ From: Joseph Ferguson Subject: Best Remote Software? Date: Wed, 03 Jan 94 14:03:17 EST Organization: Delphi Internet I need a reliable remote software program that will actually run Windows. I use an Intel 400 at home and at work. Haven't had any luck trying PcTools Commute. Do any of these remote programs run Windows? Thanks for any suggestions. Joe ------------------------------ From: davidson@ccrs.emr.ca (David Davidson) Subject: Best Modem For Developing World Organization: Canada Centre for Remote Sensing Date: Wed, 5 Jan 1994 14:32:28 GMT I got another request from a group in a developing nation who want to set up digital communication. They asked what would be the best modem to use. I asked on this newsgroup once before and I believe the response was the Telebit Worldblazer. Is this correct? I would appreciate some comments or recommendations that I could pass along. Please accept my thanks in advance. David ------------------------------ From: bobphin@jupiter.sun.csd.unb.ca (ral) Subject: Help Needed With V.42bis Organization: nbnet Date: Wed, 5 Jan 1994 15:50:05 GMT I have a Zoltrix 14,400 data/fax modem. I am not sure if I am getting compression or if so what kind. My manual indicates the S95 registar gives extended result codes. For example S95=003 will give me the Protocal: result code, usually Lap-M. Since S95 is bit mapped, I do not know the values I should use to get the codes I want. The manual further says: Bit Description 0 CONNECT indicates DCE speed 1 Append/ARQ to the connect result code if the protocol is other than NONE 2 Carrier result code 3 PROTOCOL: result code 4 reserved 5 COMPRESSION: result code 6 reserved 7 reserved I should also say that when S95=003, I get codes for bit0,1,2,3. In other words I get everything I want, except for the compression code. I've tried S95=005, but this does not work.Please help. Answer here or e-mail bobphin@nbnet.nb.ca ------------------------------ From: steveng@world.std.com (Stephen Ng) Subject: Re: New Service From NY Tel - 'Reverse Directory' Organization: Sedona Software Consulting, Arlington, MA Date: Wed, 05 Jan 1994 16:56:27 GMT Given the availability of the national white pages on cd-rom, couldn't anyone set up such a service, for both business and residential listings? Stephen Ng Sedona Software Consulting 617-648-8120 steveng@world.std.com 70302, 1510 [TELECOM Digest Editor's Note: Certainly they could. Really, the only considerations would be financial: having the cash flow to do it and the money needed to keep it running while it was first starting up. Of course you need the computer and CD-Rom, etc. PAT] ------------------------------ Date: Wed, 05 Jan 94 17:00:46 EST From: dwn@dwn.ccd.bnl.gov (Dave Niebuhr) Subject: Re: New Service From NY Tel - 'Reverse Directory' I mentioned earlier about testing out the NYTel 'Reverse Directory Assistance' and John Levine (john@iecc.com) wanted to know the number so that he could try it. Actually, it was simple. The first was looking in the Manhattan phone book and picking a business name then calling Manhattan DA and asking for the whole thing. That took some time since no one there seemed to know what I wanted. Well, I just tried it in Area Code 516 and got the whole kit and kaboodle (phone, address and zip) one-two-three. The cost for the DA will be about $.45 US and I think about $.35-$.45 US for the extra. Your mileage might vary. Have a Safe, Sane Healthy and Happy New Year! Dave Niebuhr Internet: dwn@dwn.ccd.bnl.gov (preferred) niebuhr@bnl.gov / Bitnet: niebuhr@bnl Senior Technical Specialist, Scientific Computing Facility Brookhaven National Laboratory Upton, NY 11973 (516)-282-3093 ------------------------------ Date: Wed, 05 Jan 1994 14:09:18 PDT From: DON PERROTT Subject: Re: TDD Software Wanted In article , peltz@cerl.uiuc.edu (Steve Peltz) wrote: > In article , wrote: >> Mike, the phone company is right -- you can't get ASCII to Baudot >> (code used by TYs) communication by software alone. You're going to >> need a hybrid ASCII/Baudot modem. There are several on the market, >> including the MIC300i, and they have a version for the Mac too. > Baudot is just a 5-bit code, right? Any synchronous-capable serial > chip can do that (such as a Mac). Is the modem encoding itself also > different, possibly different carrier frequencies or such? It can't be > just Baudot coding that causes the problem. > Why don't they start releasing dual-mode TDD machines, that can handle > ASCII and "standard" modem standards, and eventually phase out Baudot- > only machines? I want to suggest that this topic has been very thoroughly covered in past issues of the TELECOM Digest. I did a search on TDD several weeks ago and found that there have been numerous requests on the topic and some excellent answers over the years. There are issues with Baudot to ASCII conversion with SHIFT characters as well as the hardware issues with half duplex communication which is no tone between characters and 1400/1800 Hz tones unlike any normal modem used today. Also, the baud rate is 45.5 bps. You can purchase dual-mode TDD machines that handle Baudot and ASCII but for some reason they have never really taken off in the deaf community. They tend to be the high end (read expensive) TDD's and are very much overkill for those only interested in TDD communications. Also, the ASCII capabilities usually provided are 300 baud ... insufficient to be useful for much else. There seems to be some lawmaker intervention in this area. Some software was written by John W. Spalding that can be used to emulate TDD on a TRS-80 Color Computer or an IBM PC/PCjr using the cassette port and a modified telephone amplifier. It is well worth getting if only for the comments in the code to help you understand how TDD works. I downloaded it from the HEX BBS (301) 593-7357. It is called tdd56.zip. I am interested in extending the concept of tdd56 and building a simple hardware interface to either use an XT/AT serial port or a simple adapter card. I have some concepts in mind but would be very happy to receive ideas (or encouragement) from anyone. Don Perrott perrott@bbs.ug.eds.com General Motors of Canada Oshawa, Ontario, Canada ------------------------------ From: stevef@wrq.com (Steve Forrette) Subject: Re: Caller ID/911 Seattle and Article Recommendation Date: 05 Jan 1994 22:14:10 GMT Organization: Walker Richer & Quinn, Inc. Reply-To: stevef@wrq.com (Steve Forrette) In , hedlund@reed.edu (M. Hedlund) writes: > I also saw a news piece about 911 technology and cellular phones, > saying that Caller-ID/Signalling System Seven had speeded response to > home calls (as discussed) but that only _some_ systems could ID > cellular phones -- Seattle was mentioned as considering cellular- > Caller ID to improve 911. Apologies if this overlaps a thread I > missed, but anyone in Seattle with info? I have cellular accounts with both of the Seattle carriers: US West Cellular and Cellular One. At least when calling 800 numbers, the US West Cellular system will report my actual cellular number as the ANI, whereas Cellular One reports a non-dialable number that's common on all subscribers. Since 911 systems are often implemented using operator-service trunks, I would imagine that the 'correct ANI' feature of the US West system would also work with 911, although I don't have any specific knowledge that this is the case. As far as Cellular One goes, they could implement 911 ANI with some sort of special data line to the PSAP, without converting to full ANI for all outbound calls. One benefit of the US West Cellular ANI situation is that it allows me to select any IXC that's generally available via Equal Access as my default carrier for the cellular phone. Steve Forrette, stevef@wrq.com ------------------------------ From: tsshea@mmm.com (Timothy S. Shea) Subject: Re: Being Paged by Mystery 800 Number Organization: 3M - St. Paul, MN 55144-1000 US Date: Wed, 05 Jan 94 00:22:52 GMT Bud Couch (bud@kentrox.com) wrote: > In the meantime, let me offer my own WAG. I tried the number from my > PC and found that it connected at *1200* bps, although my modem is a > V.22bis (2400). This means that the machine at the other end is > forcing the speed to be that low. Why? > I suspect that the modem on the other end is an older (in modem terms > more than two years is *old*) ZOOM modem, for their 1200 units had an > interesting security feature: the entry password to the modem was not > an ascii string, but a four number *touchtone* sequence.If the correct > code wasn't entered within a few seconds of answer, the unit hung up. > We may have just stumbled into someone's database "server" that has > this security feature. I don't know about that theory. I have several scripts running on our systems that check for status or any error conditions. If it finds something wrong our communications server pages me through an old 1200 bps modem ... Or this is way the company pages its people and someone just entered in the number wrong ... internet: tsshea@mmm.com timothy shea compuserve: 76300,1230 Minnesota Mining and Manufacturing ------------------------------ End of TELECOM Digest V14 #8 **************************** Downloaded From P-80 International Information Systems 304-744-2253