IC32AT.10 Top of the radio ^ [[-[>--[[ The number of diodes installed in the top 3 pads [[-[>--[[ depends on the frequency coverage of the rig, maybe [[ [[ two or all three. _ZDDBD @DDAD This is a small diode, by removing it the unit will receive from 300-370 Mhz but this is an untested mod! [[-[>--[[ When you cut this one crossband repeater is enabled! \ [[ \ [[ If you put this diode crossed and have full frequency coverage not only you enable cross band repeater but Bottom of the radio you can insert the frequency from the keypad starting where battery plugs from second digit (without this mod when you wish to insert a frequency in another decade from the one you already are, you have to go there manually). Last but not least to enable cross band repeating first choose a pair of frequencies with the two vfo's for VHF and UHF.Then press and hold function key while pressing with the other hand the following "C" "6" "D". The radio will start scanning the two frequencies continiously, if a station is heard in one of the two it will be retransmitted from the other! The two frequencies must be simplex, no cross band repeaters yet sorry! Happy crossing manos SV1IW @ SV1IW Downloaded From P-80 International Information Systems 304-744-2253