% = % = % = % = % = % = % = % = % = % =          
=                                     %          
%      CARD READER ACCESS SYSTEM      =          
=                                     %          
%         By  The Ring Master         =          
=                                     %          
%     Phile # 13 of P/HUN Magazine    =          
=     ----------------------------    %           
%              Issue #5               =
=              --------               %
% = % = % = % = % = % = % = % = % = % =          


Sorry for the 40 columns but thats the
best I can do.
---------------------------------------
Incase one of these days you get lucky 
and get a Telco Card Key, heres how you
can use it -> :                               

HOW TO USE 'YOUR' COMMAND CARD KEY  
::::::::::::::::::::::::::::::::::

An ENTER and EXIT sensor is installed at
the from entrance door.

A personal "Command Key" has been given
to you which is recognized as a valid
entry/exit to the building.

Each card is programmer for a specific 
tour and/or time schedule.Thirty minutes
on either side of the scheduled time 
allows for early entry or delayed
departure. 

Your key card must be used when entering
and exiting building.
 - If not used when exiting the building 
   , it will not unlock the next time it
   is  used to gain entrance and 
   vice-versa.

Present your card key to within 2 or 3 
inches of the ENTER/EXIT sensor. It is
not necessary to rub care key on the 
door glass.

If the card key is authorized for that
door for that time, within several 
seconds, you will hear the electric 
strike unlock.

Access/Egress by significant numbers of
personnel at the same time: For eg:
(This is just for info purposes) several
employees going to lunch. This procedure
will only be  in effect at specific
buildings with large number of employees
(for example Switching Control Centers).

- Local management will have to modify 
  system for specific times.
 
- First employees presents card which
  opens door.

- Following employees will also present
  thier card key  to the ENTER/EXIT 
  sensor in order to be acknowledged by
  the system program.

- A red indicator light installed in the
  ENTER/EXIT sensor enclosure will flash
  on to acknowledge your card key code
  has been recognized.

===============================================================================

Downloaded From P-80 International Information Systems 304-744-2253 12yrs+