                        INTERACT


MOUSE TEST 
   
   The mouse test checks the functionality of the 
   buttons (make sure the screen shows "pressed" when 
   the appropriate button is pressed and "released" 
   when released. Next it will test positioning on the 
   screen in both character mode and graphics (if you 
   have graphics video capability).  Make sure you have 
   both full detail and full screen movement in each 
   mode tested. 

    
LOCATE BAD CHIPS 
   
   This operation is not actually a test, but rather a 
   utility for finding bad memory chips identified in 
   the RAM Tests.  If the RAM Test detects errors, it 
   will provide Memory Locations and Bits for the 
   offending chips, SIMMS or SIPS.  With this 
   information and information about the configuration 
   of your memory board(s), you can use this utility to 
   determine exactly where the offending memory is 
   physically located. 


SPEAKER TEST 
   
   The speaker test plays a tune to verify operation of 
   the speaker.  Note that the Speaker Test tests the 
   operation of you PC's internal speaker, but not that 
   of sound cards (e.g. Sound Blaster<TM>).  


KEYBOARD TEST 
   
   The keyboard test checks the functionality of each 
   key of your keyboard, the type-amatic (key repeat) 
   function and the lights for Caps Lock, Num Lock and 
   Scroll Lock.  You must first specify which type of 
   keyboard you have.  Non-standard keyboards may have 
   certain keys in different locations than are shown on 
   the keyboard layout. 

   Note that you cannot exit the keyboard test by 
   pressing [Esc] as is the case with virtually all 
   other tests.  This is to allow for the testing of ALL 
   keys, including the [Esc] key.  Therefore, to end 
   this part of the keyboard test you must type "END" 
   

                       *** END *** 

