GENERAL HELP From the main menu you may press the horizontal arrow keys to move the highlighted menu bar to the main menu selection you desire. Each main menu selection has a number of menu options which may be selected by using the up and down arrow keys. Once you have selected the menu option you desire, press the [Enter] key to choose the selection. Pressing the [Esc] key at the main menu will select the "EXIT to DOS" selection. Pressing the [Enter] key at this point will leave QAPlus. Certain monochrome screens (i.e. laptops) emulate color as shades of gray. The highlight may not be visible on these monitors. If you cannot see a highlighted menu bar after the startup Hardware Configuration check has been completed and you have pressed [Esc] at the prompt: press the Right Arrow key once, followed by the Up Arrow key two times, followed by the [Enter] key, and then the Up Arrow key followed by the [Enter] key to select "Color Off". This should make the highlight visible. The "Press any key" message is shown when the program pauses to permit you to view information. After you have viewed the information, pressing any key except the [Shift], [Caps Lock], [Alt], or [Ctrl] keys will let the program continue. Pressing the [Esc] key at any point other than within the main menu will cause the program to halt what it was doing and return you to the previous screen. If the [Esc] key is pressed while the program is busy performing tests or printing, it may take a moment before it recognizes the [Esc] request. *** END ***