ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Founded By: ³ º Network Information Access º ³ Mother Earth BBS ³ ³ Guardian Of Time ³Äº 20JUN90 ºÄ³ NUP:> DECnet ³ ³ Judge Dredd ³ º Guardian Of Time º ³Text File Archives³ ÀÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÙ º File 38 º ÀÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÙ ³ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ³ ³ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄĶVMS SYSTEM MANAGER'S MANUALÇÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º CHAPTER 8 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Setting Up a Local Area VAXcluster Environment This chapter discusses how to set up a small local area VAXcluster configuration. For the purposes of this manual, a small local area VAXcluster configuration consists of one processor called a boot server that serves as the hub of the cluster, and one or more MircroVAX or VAXstation processors that are connected to the boot node. If you want to learn how to set up this type of VAXcluster configuration, then you should read the rest of this chapter. If you manage a VAXcluster environment other than the type described in this chapter, then you should refer to the VMS VAXcluster Manual. 7.1 What Is a Cluster? A cluster is a group of two or more processors that share some or all of their resources. When a group of VAX processors shares resources in a VAXcluster environment, the storage and computing resources of all of the processors are combined, which can increase the processing capability, communications, and availability of your computer system. 7.1.1 VAXcluster Types Three types of VAXcluster configurations are possible: Local Area VAXcluster configuration CI-only VAXcluster configuration Mixed-interconnect VAXcluster configuration Local Area VAXcluster Configuration A Local Area VAXcluster configuration is made up of a single VAX processor that serves as the management center of the cluster, plus one or more VAX processors that are connected to ths hub. A local area VAXcluster configuration always includes the following parts: : A Boot Server A boot server is a VAX or MicroVAX processor, and it serves as the management center of a local area VAXcluster environment. The system disk of the boot server contains management files for the entire cluster, including startup files, the boot server's system disk, user authorization information, and the capability of letting other processors join the cluster. The boot server must be available and running for the cluster to operate. Boot servers should be the most powerful machines in the cluster. They should also use the highest bandwidth Ethernet adapters available. You can use any VAX or MicroVAX system except VAX-11/725, VAX-11/730 or MicroVAX I as a boot server. ( Note that if your boot server is a MircoVAX II class system with an RD54 system disk, you can have a maximum of three satellite nodes in your VAXcluster configuration. In either of these cases, DIGITAL rtecommends that the satellites use local RD series disks for paging and swapping. Refer to the VAXcluster Software Product Description for complete information about supported configurations. ) : Satellite Nodes A satellite node is a MicroVAX processor that is a member of the cluster. A processor becomes a satellite node when the CLUSTER_CONFIG.COM procedure is ececuted from the boot server to add the processor to the cluster. You can use any of the following as satellite nodes: : MicroVAX II or MicroVAX 2000 systems : VAXstation II or VAXstation 2000 systems : MicroVAX 3000 series systems CI-only VAXcluster Configuration A CI-only VAXcluster configuration is a cluster in qhich only the computer interconnect is used for communications between the processors in the cluster. In a CI-only VAXcluster configuration, the star coupler is used as the common connection point for all nodes in the cluster, including both VAX processors and Hierarchical Storage Controllers ( HSCs ). Nodes in a CI-only VAXcluster configuration can be either : VAX processors listed in the VAXcluster SPD, or : HSCs Mixed-Interconnect VAXcluster Configuration A mixed-interconnect cluster may include both CI-connectdc VAX processors and Micro-VAX systems. This chapter concentrates on setting up a Local Area VAXcluster configuration with a single boot server. Although some of the management tasks for other VAXcluster types are similar, you should refer to the VAXcluster documentation that is avaiable in the full VMS documentation set for information about managing a CI-only or mixed-interconnect cluster. 7.2 Shared Resources A major benefit of a VAXcluster configuration is the ability to share resources. A shared resource is a resource ( such as a disk or a queue ) that can be accessed and used by any node in a cluster. Data files, application programs, printers, are just a ffew of the items that can be accessed by users on a cluster with shared resources, without regard to the particular node on which the files or program or printer might physically reside. When disks are set up as shared resources in a VAX cluster environment, users have the same environment ( password, privileges, access to default login disks, and so on ) regardless of the node that is used for logging in. You can realize a more effcient use of mass storage with shared disks, because the information on any device can be used by more than one node--the information does not have to be rewritten in many places. Print and batch queues can also be set up as shared resources. In a VAXcluster configuration with shared print and batch queues, a single jobt controller queue file manages the queues for all nodes on the cluster. The job controller file makes the queues available from any node. For example, suppose your VAXcluster configuration has fully shared resources and includes nodes ALBANY, BASEL, and CARIO. A user logged in to node ALBANY can send a file that physically resides on node BASEL to a printer that is physically connected to node CAIRO, and the user never has to specify ( or even know ) the nodes for either the file or the printer. For more information about setting up and using print and batch queus in a VAXcluster environment, see Chapter 5. 7.3 Preparing a System for a Local ARea VAXcluster Environment In a VAXcluster environment with a single system disk, you need to install the VMS operating system only once, regardless of the number of nodes in the cluser. To install the operating system, foollow the instructions in your processor's installation guide. Before beginning the installation procedure, you must determine the configuation type for your cluster ( CI-only, local rea, or mixed-interconnect). During the installation of the operating system you will be asked a series of questions. Table 7-1 lists the questions and answers for Local ARea VAXcluster configurations. NOTE: While rebooting at the end of the installation procedure, the system displays messages warning that you must install required licenses. Be sure to install these licenses, as well as the DECnet-VAX license, as soon as the system is available. Procedures for installing the licenses are described in the release notes distributed with the software kit. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³TABLE 7-1: INSTALLATION QUESTIONS FOR LOCAL AREA VAXCLUSTER OCNFIGURATIONS ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³Question Response ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³Will this node be a cluster member (Y/N)? Enter Y ³ ³ ³ ³What is the node's DECnet node name? Enter DECnet node name ³ ³ for example, ALBANY. ³ ³ The DECnet node name ³ ³ may be 1-6 alphanumeric³ ³ characters in length ³ ³ and may not include $ ³ ³ or _. ³ ³ ³ ³What is the Node's DECnet node address? Enter DECnet node ³ ³ address :-> 2.2. ³ ³ ³ ³Will the Ethernet be used for cluster communica- ³ ³tions (Y/N)? Enter Y. The Ethernet ³ ³ for cluster (SCS ³ ³ internode) communica- ³ ³ tions in local area ³ ³ configurations. ³ ³ ³ ³Enter this cluster's group number: Enter a number in the ³ ³ range from 1-4095 or ³ ³ 61440-54435. ³ ³ ³ ³Enter this cluster's password: Enter the cluster pw. ³ ³ 1-31 alphanumeric ³ ³ characters in length ³ ³ and MAY include $ and _³ ³ ³ ³Reenter this cluster's password for verification: Reenter The password ³ ³ ³ ³Will ALBANY be a disk server (Y/N)? Enter Y. In local ³ ³ area configurations, ³ ³ the system disk is ³ ³ always served to the ³ ³ cluster. ³ ³ ³ ³Will ALBANY serve HSC disks (Y/N)? Enter N. ³ ³ ³ ³Enter a value for ALBANY's ALLOCLASS parameter: Enter a value of 0 for ³ ³ Local Area VAXcluster ³ ³ configurations ³ ³ convered by this manual³ ³ ³ ³Does this cluster contain a quorum disk [N]? Enter N for Local Area ³ ³ VAXcluster configur- ³ ³ ations covered by this ³ ³ manual ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 7.3.1 Building a VAXcluster Configuration Once you have installed the VMS operating system, you can start to build your cluster. This section describes how to build a simple Local Area VAXcluster configuration using the command procedure SYS$MANAGER:CLUSTER_CONFIG.COM. If you find that your cluster configuration is more than the type described in thismanual, be sure to consult the VMS VAXcluster Manual. The command procedure CLUSTER_CONFIG.COM is the primary tool that you use for adding a node to your VAXcluster configuration, removing a node from the cluster, or changing the characteristics of a node. This section describes how to use CLUSTER_CONFIG.COM to add or remove a satellite node in a Local Area VAXcluster configuration. 7.3.1.1 Using CLUSTER_CONFIG.COM Before using CLUSTER_CONFIG.COM, log in to the SYSTEM account on the system that will be your boot server and make sure that DECnet-VAX is up and running be sure that your default is set to SYS$MANAGER; then enter the following command: $ @CLUSTER_CONFIG 7.3.1.2 Setting Up the Boot Server The first step in setting up your Local Area cluster for the first time is to establish the boot server. You must establish the local system as a boot server before you can add any satellites to the cluster. To establish a node as a boot server, run CLUSTER_CONFIG.COM anad select the CHANGE option from the menu. Then, select the option to enable the local system as a boot server. 7.3.1.3 Adding Satellite Nodes To add satellites nodes to your Local Area VAXcluster configuration, you use the ADD option from the CLUSTER_CONFIG.COM menu. When you execute CLUSTER_CONFIG.COM to add a satellite node, you will be asked a series of questions for which the command procedure will supply most default values. For Local Area clusters that are the subject of this manual, the default values are sufficient. (If your cluster has special requirements and you want to learn more about values other than the dfaults, you should consult the VAXcluster documentation in the extended VMS documentation set. ) There are some values that you must supply. These include the following: : DECnet node name and node address for each satellite--The node name has up to 6 alphnumeric characters. The node address should be supplied by your network manager. : Satellite's Ethernet hardware address--The Ethernet hardware address has the form xx-xx-xx-xx-xx-xx. You must include the hyphens when specifying the hardware address. To obtain the Ethernet hardware address for MicroVAX II and VAXstation II satellites, enter the follwoing commands at the satellite's console: >>> B/100 XQ Bootfile: READ_ADDR For MicroVAX 2000 and VAXstation 2000 satellites, enter the following commands at successive console-mode prompts: >>> T 53 2 ?>>> 3 >>> B/100 ES bootfile: READ_ADDR (In this example, if the second prompt appears as 3 ?>>>, press RETURN.) For 3xxx series satellites, enter the following command at the satellite's console: >>> SHOW ETHERNET : Workstation windowing system: the windowing system ( for example, UIS ), if your satellite is a workstation. 7.4 DECnet-VAX Connections In any cluster configration, DECnet-VAX connections are required for all processor nodes. Use of DECnet-VAX facilities ensures that cluster managers can access each node in the cluster from a single terminal, even if terminal-switching facilities are not available. In local area clusters, DECnet is required both for system management functions and interprocessor communication. For example, DECnet is used for remote booting operations ( downline loading of satellite nodes ). In these configurations, DECnet and System Communication Services coexist on the same Ethernet. They share the same data link and physical link protocols, which are implemented by the Ethernet data link drivers, the Ethernet adapters, and the Ethernet itself. $_END OF NIA038