------------------------------------------------------------------------------- SONY CM-P11 Portable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: SONY Programmer: Handset ESN Prefix DEC: 154 HEX: 9A ESN, S/N Match Required: Yes Stamped Model Number: CMP11K Number of Channels: 832 Programming Sequence: Install charged portable battery Power On Enter #.+ 5118762 (To program NAM 1) or * + 413897 (To program NAM 2) NAM 1 must be programmed before NAM 2 Once access code is entered, SID will display Enter parameter then press SEND to increment Press END to enter data and exit program mode # of Digits System ID: 5 XXXXX + SEND Mobile Number: 7 XXX-XXXX + SEND Unlock Code: 4 XXXX + SEND Area Code: 3 XXX + SEND Local Use: 1 1 + SEND MIN Option; 1 1 + SEND Station Class: 2 10 + SEND Initial Paging Chan.: 3 333 or 334 + SEND Access Overload: 2 XX + SEND Preferred System: 1 (0=B or 1=A) + SEND Group ID: 2 XX + SEND End-to-End Signaling: 1 1 + SEND Rep Opt: 1 1 + SEND Horn Alert: 1 0 + SEND Handsfree: 1 X + SEND Options(1): 3 XXX (1) Options Redial = 1 Roam Inhibit = 2 Add assigned numbers to enable function (ie, to enable both redial and roam inhibit enter 1+2=3). A second example would be to enable redial and disable roam inhibit you would enter 1 (1+0=1) Display ESN: Power On Enter 07386260 (within 10 seconds) "Selftest No" will display Enter 10+SEND Multiple NAM Select: F + 4 (Simultaneously for 2 seconds) New Unlock Code: NAM System Select: F + 4 + 4 + 4 etc.. (To scroll choices) Standard (AB or BA) A Only B Only Home