Motorola 4800
Right now, all that's here is this user's guide. But more is on the way.
:::: MoToroLa 4800x - User Manual ::::
Typed up for ya by sCribLa
Ok, i've chosen to skip quite a lot of the basic shit, how to place a call
etc...
ELECTRONIC LOCK
To Lock: Press FCN, 5
To help you remember this sequence, note that the letter
L (for LOCK) is on the number 5 key. The Message Loc'd
will appear in the display when the phone is locked.
To Unlock: Enter your three digit unlock code.
Automatic Lock: The Automatic Lock feature will automatically lock the
mobile telephone every time it is turned off.
To Select: press FCN, 6. The message EnAbLE will appear
in the display.
To Cancel: press FCN, 6. The message diSabLE will appear
in the display.
Change Unlock To Select: press FCN, *
Code:
Enter: 6 digit security code (provided by your installer) ha!
Enter: new 3 digit unlock code
Press: #, the new unlock code will appear in the display.
The telephone will also unlock if locked initially.
Recall Lock To Select: press FCN, *
Code:
Enter: 6 digit security code (provided by your installer)
Press: RCL
This feature will display your current lock code.
USING MEMORY LOCATIONS
Your mobile telephone has storage locations for 50 telephone numbers which can
be used to quickly dial frequently called numbers. Each memory location is
capable of storing numbers up to 24-digits in length.
To Store Dial: Telephone number
a Telephone
Number: Press: FCN, RCL
Enter: any 2 digit memory location (01-50)
The memory location number selected will be displayed to
confirm storage.
Recall and To select: press RCL
Display Number
From Memory: Enter: 1 or 2 digit memory location number (01-50)
Postscripting: After recalling a number into the display, additional digits
can be added to the end of the recalled number before
attempting to place a call. This does not change the phone
number that will continue to be stored in memory.
Speed Dialling: To quickly call a number from a memory location,
Enter: 1 or 2 digit memory location (01-50)
Press: SND
Recall Own
Phone Number: Press: RCL, #
Scratchpad/
Notepad memory: Phone numbers can be entered into the display while in
conversation as a type of electronic notepad. This number
can then be called (after ending current conversation) by
pressing the SND button, or stored into a memory location.
(Note: advise the party on at the opposite end that DTMF
tone signals will be heard through the earpiece as the
number is entered). (why am i bothering to type dis shit?)
Should you make a mistake when entering a number into the
scratchpad, press FCN, END.
ALPHA-CHARACTER ENTRY
People's names or other alpha characters can also be entered into memory
locations with a corresponding phone number, providing you with a useful
reference when recalling memory location contents.
(gee thanks motorola!)
.... NOTE ....
Names up to 7 chr's long can be stored if the phone number
is 16 digits or less. If more than 16 digits are entered,
any name stored will be erased.
To Select
Alpha Entry: Press FCN, MUTE
The display will show ALPHA momentarily. Then "_" will appear
as a prompt for you to enter the first letter of the name you
are storing.
To Store a Name: Use the letters on the top twelve numeric buttons as a guide
to storing names. (i'm sure he said he'd left out the crap?)
Use buttons * and # to shift left and right on the display.
When the name is completed, press END.
Enter the phone number e.g. : 0800-313000
Press FCN, RCL, 10, the memory location "10" will appear in
the display to confirm storage.
CALL TIMERS AND CHARGE ACCUMULATORS
Your phone is equipped with six separate Call Timers/Charge Accumulators:
(1) Individual Call,
(2) Resettable,
(3) Cumulative,
(4) Home Cumulative,
(5) Roam Cumulative, and
(6) Audible.
This information may be used to estimate airtime charges or to determine usage
for a particular period.
(don't use this feature is you easily go on guilt trips about other peoples
phone bills/termination of service!)
Individual Call: Accumulates the airtime/charge units for the last or
current call made. Automaticly returns to zero before each
call.
Resettable: Accumulates the total airtime/charge units until reset by the
user.
Cumulative: A non-resettable timer which accumulates total airtime/charge
units.
Home Cumulative: The cumulative airtime/charge units used in you home system
(the system that bills you).
Roam Cumulative: The cumulative airtime/charge units used incurred whilst
roaming (using a system different than the one you subscribe
to).
To select: press FCN, 8, the message EnAbLE will appear.
To cancel: press FCN, 8, the message diSabLE will appear.
Display Call Timers:
Individual: To display: press FCN, 2
The following will be displayed:
i XX XX
Where (i) designates individual.
Resettable: To display: press FCN, 2, #
The following will be displayed:
r XXXXX
Where (r) designates resettable.
Cumulative: To display: press FCN, 2, #, #
The following will be displayed:
C XXXXX
Where (C) designates Cumulative.
Home Cumulative: To display: press FCN, 2, #, #, #
The following will be displayed:
h XXXXX
Where (h) designates Home.
Roam Cumulative: To display: press FCN, 2, #, #, #, #
The following will be displayed:
n XXXXX
Where (n) designates non-home (roam).
To return to normal operation, press END.
Anyone wanna know about setting up currency rates ?
Good, i'll skip that part then...
CALL RESTRICTIONS AND SERVICE LEVELS
Your mobile phone features the ability to restrict call placement, which you
may wish to do when lending your automobile and phone to another person.
Using the six digit security code, you may set your phone for different call
restrictions known as service levels. Calls can be received with any service
level in effect, except service level 5.
Out going call restrictions:
Service level 1: Restricted keypad dialling - disables keypad dialling and
only allows placing calls from memory.
To select: Press FCN, *, 6 digit sec code, 1, #
LEVEL 1 will appear in the display.
Service level 2: Restricted memory usage - memory locations cannot be
recalled. Only keypad entry is allowed.
To select: Press FCN, *, 6 digit sec code, 2, #
LEVEL 2 will appear in the display
Service Level 3: Restricted Memory Storage - Locations cannot be stored to.
To Select: Press FCN, *, 6 digit sec code, 3, #
LEVEL 3 will appear in the display.
Service Level 4: Full Service - Full keypad and memory usage allowed.
To Select: Press FCN, *, 6 digit sec code, 4, #
LEVEL 4 will appear in the display.
Service Level 5: Outgoing Calls Only - prevents reception of incoming calls.
To Select: Press FCN, 5, 6 digit sec code, 5, #
LEVEL 5 will appear in the display.
Service Level
Selection: Multiple combinations of service levels can be enabled by
repeating the pushbutton sequences for each service level
desired. However when service level 4 (Full Service) is
Selected, all other service levels will be erased.
Cancelling
Service Levels: Individual restriction level can also be deleted, leaving
the rest of the levels intact.
To Cancel Level 1:
Press FCN, *, 6 digit sec code, 1, END
To Cancel Level 2:
Press FCN, *, 6 digit sec code, 2, END
To Cancel Level 3:
Press FCN, *, 6 digit sec code, 3, END
To Cancel Level 4:
Press FCN, *, 6 digit sec code, 4, END
To Cancel Level 5:
Press FCN, *, 6 digit sec code, 5, END
After a service level has been cancelled, the message
diSAbLE will appear in the display.
STATUS REVIEW
The message nonStd (nonstandard) may appear in the display when first turning
on the phone. This message indicates that one or more of the features of
your phone have been selected, To review the features that have been set,
Press: FCN, 9, RCL
The first feature currently enabled on your phone will be displayed.
Repeatedly press RCL to scroll through all additional features currently
enabled. Pressing END returns the unit to normal operation.
Messages that may appear in the display are:
LEVEL X Call restriction options set.
bEEP The audible call timer is set.
ALt oFF Silent electronic call alert ringer.
AUtoLoc The automatic lock feature is set.
NOTE
The message "Std" will appear in the display when all user features
are set to standard.
ADDITIONAL FEATURES
Auxiliary
Alert: The Auxiliry Alert feature allows an additional alerting
device to be activated for the first 5 rings of an incoming
call (15 seconds). This is useful if you will be outside
of the vehicle and expect a call, and are within hearing or
visual distance of the of your vehicle.
This feature can only be selected when NOT in a phone call.
To Select: Press MUTE, the message ALErt will appear in
the display.
Turn off the vehicle ignition. The external alert will only
respond if the vehicle ignition switch is turned off.
When the auxiliry alert is enabled, the phone remains on
up to 4 hours despite the ignition being turned off.
Calls maybe placed whilst in alert mode unless the unit
was locked after pressing the MUTE button.
To Cancel: Press MUTE, or press PWR, the ALErt message will
turn off. (if PWR is depressed the phone will also switch
off).
The Alert mode is automaticly disabled the next time the
vehicle ignition is switched on.
Handset
Microphone
Muting: The handset microphone may be turned off (muted) during a
call. This allows passengers to say...
"Uncle john, you fucker get off our line"
The handset earpiece stays active, allowing passengers to
laugh at uncle john... "ello ? ello? ELLO !"
To mute the microphone: press MUTE.
MUtE will be displayed to confirm that uncle john isn't
getting offended !
To unmute the microphone press: MUTE.
If uncle john terminates the call in disgust, the mute
function automatically cancels.
DTMF Dialling: Your cellular telephone provides the standard DTMF
signalling typically used to signal pagers, access computers,
perform electronic banking, hack VMB's, blow thru PBX's,
request a faxback to a losers voice line, use at&t cards,
wind up the cell-op, etc...
DTMF Via
Keypad: Once the normal portion of the call is established, pressing
the keypad digit buttons transmits standard digits.
Do Not press SND - DTMF is transmitted on the fly.
DTMF Via
Memory Location: (1) Make the call to the receiving party. (line?)
(2) recall the number from memory you wish to transmit
as DTMF digits:
Press RCL
Enter: 1 or 2 digit memory location (01-50)
(3) Press RCL, SND
(4) Repeat steps 2 and 3 as required to send separate
groups of numbers.
OPTIONAL HANDS FREE OPERATION
To Place a Call: Enter: phone number
Press: SND
You do not have to lift the handset.
To switch from
hands free to
handset
operation: Lift the handset.
To switch from
handset to hands
free operation: Press: MUTE
Replace the handset in cup.
Press: MUTE
To end a call: Press: END
To receive call: Press: SND
TRANSPORTABLE ONLY FEATURES
Battery Level: Press: FCN, FCN
Low Batt Warning: When the battery meter reaches level 2 or below, a warning
signal (two bleeps) will sound.
The message Lo bAtt will appear in the display.
APPENDIX - COMMAND SUMMARY
FEATURE KEY SEQUENCE
Power on/off PWR
Place/Receive Calls SND
End a Call END
Clear Display END
Volume Control Pushbutton on left side of handset
Recalling Numbers From Memory RCL, (01-50)
Recall Own Phone Number RCL, #
DTMF From Memory RCL, (01-50), SND
Lock FCN, 5
Clear Display In Conversation FCN, END
Recall Last Number Dialed RCL, 0, 0
Alpha Entry FCN, MUTE
Display Call Timers FCN, 2, #, #, #, #
One Minute Beep Enable/Disable FCN, 8
Mute/Unmute MUTE
Aux Alert MUTE (when not in conversation)
Clear Resettable Call Timer FCN, 7, END
Silent Alert Enable/Disable FCN, 1
Status Review FCN, 9, RCL (RCL to scroll thru)
Store Numbers In Memory FCN, RCL, (01-50)
Auto Lock Enable/Disable FCN, 6
Recall Lock Code FCN, *, 6 digit sec code, RCL
Service Level 1 Enable/Disable FCN, *, 6 digit sec code, 1, #/END
Service Level 2 Enable/Disable FCN, *, 6 digit sec code, 2, #/END
Service Level 3 Enable/Disable FCN, *, 6 digit sec code, 3, #/END
Service Level 4 Enable/Disable FCN, *, 6 digit sec code, 4, #/END
Service Level 5 Enable/Disable FCN, *, 6 digit sec code, 5, #/END
Change Unlock Code FCN, *, 6 digit sec code, NEW CODE, #
Battery Meter (Transportable Only) FCN, FCN
. ..Kp2 +44 (0)1634-686963 sT.. .
..SysOps: SmUrF - sCribLa..