-------------------------------------------------------------------------------
                          GOLDSTAR GM/GT 5000
-------------------------------------------------------------------------------
                NAM Type:  EEPROM
            Manufacturer:  GOLDSTAR
              Programmer:  Handset
          ESN Prefix DEC:  141
                     HEX:  8D
 ESN, S/N Match Required:  Yes
    Stamped Model Number:  GM5000 or GT5000
      Number of Channels:  832

    Programming Sequence:  Power On
                           FCN + 4 + * (to select NAM)
      Enter Program Code:  FCN + 99 + * ("Enter Code"
                            will display) + 1234567890 + MEM
                           Code must be entered within 30 seconds
                           Mobile Number will display
                           Press MEM after entering each parameter to Store
                           Once Parameter is stored, press Scroll UP or DN
                            to view next parameter
                           Press CLR key to exit program mode WITHOUT
                            changing any parameters

                       # of digits
           Mobile Number:  10   XXX-XXX-XXXX + MEM
               System ID:  5    XXXXX + MEM
    Initial Page Channel:  3    333 or 334 + MEM
         Access Overload:  2    XX
             Unlock Code:  4    XXXX
           Security Code:  6    XXXXXX + MEM
     Theft Alarm Disable:  4    XXXX + MEM
        Preferred System:  1    0 (B) or 1 (A) + MEM
           Station Class:  1    0 + MEM
               Handsfree:  1    0 (Disable) or 1 (Enable) + MEM
               Local Use:  1    1 + MEM
              MIN Option:  1    1 + MEM
              Horn Alert:  1    1 + MEM
        Optional Speaker:  1    1 + MEM

"Save to NAM?" will display, press MEM to save NAM or CLR to exit.

              Horn Alert:  FCN + 1 + Vol UP (To Scroll)
                            "Horn Alert" will display, + * (To toggle) +
                            MEM (to store) + Turn Ignition Off
         New Unlock Code:  NAM
           System Select:  FCN + 2 + 6 digit security
                            Code + MEM + Vol UP or DOWN(to scroll) "System
                            Select" will display + * (To toggle)
                                  A  Non-wireline, B  Wireline
                                  A/B Pref non-wireline, B/A  Pref wireline
                                  Home
Press MEM (to store)
Press CLR (to exit)