PNP FM Radio Quick Installation Guide

Software Installation Steps

 Note : The software of FM Radio only can be run under
        MS Windows 3.1 or MS Windows 95

 For Windows 3.1

(1). Insert your FM Radio Utility diskette into drive A or B.
(2). Select the File menu on the Program Manager.
(3). Click on RUN Command.
(4). Type A:\SETUP (if diskette in drive B, type B:\SETUP), and
     click on 'OK' button.
(5). After you have started up the setup program of the FM
     Radio, just simply follow the instructions displayed on the
     screen step by step.


 For Windows 95

(1). Insert your FM Radio Utility diskette into drive A or B.
(2). Select Start button.
(3). Select Run Command.
(4). Type A:\SETUP (or B:\SETUP)
(5). After you have started up the setup program of the FM
     Radio, just simply follow the instructions displayed on the
     screen step by step.


*** WARNING:
1). Before you install FM Radio, please do make sure you have
    installed the right driver for the sound card plugged into
    your PC. For example, if you use Windows 95, the driver for
    the sound card must be the Windows 95 version. Otherwise, you
    cannot make your FM Radio working properly.