From: thiel@hardy.u.washington.edu (me me me me...)
Subject: TECH: More Powerglove questions
Date: Sun, 27 Sep 1992 02:48:23 GMT
Organization: University of Washington, Seattle



   I recently bought a powerglove and have just hooked it up to my
parallel port in accordance with the instructions on
sunee.uwaterloo.ca.  I used a disk power cable to get the 5v and
ground.  I wasn't sure which wires were which on the cable, but made a
good guess from other wires, their colors, and their voltages, and
used a red wire for 5v and a black wire for ground.  I also hooked the
wires from the nintendo female plug into the parallel port at pins
18,2,3, and 13.  I turned on the computer and the glove beeped whirred
appropriatly, but the LED's in the upper right-hand sensor all lit and
stay lit.  When i tried the glove with rend386's demo4, it would only
give me a "Glove: flat" status, and I can't find any other executable
tests for the glove.

   I am looking for *any* suggestions on what to do - they will all be
greatly appreciated, so please give me input. It's very frustrating to
be this close, and ...

Thanks in advance...
thiel