CROSSDIR = /net/acae127/home/bammi/atari.hp-ux/cross-gcc
CROSSBIN = $(CROSSDIR)/bin
CROSSLIB = $(CROSSDIR)/lib
CROSSINC = $(CROSSDIR)/include

# This makefile may be used to make the VAX, the 68020 the 80386 or the
# ns32k assembler.

# If you just want to compile the vax assembler, type 'make avax'

# If you just want to compile the mc68020 assembler, make sure m68k.h
# is correctly set up, and type type 'make a68'  (Except on HPUX machines,
# where you will have to make the changes marked below before typing
# 'make a68'

# If you just want to compile the i386 assembler, type 'make a386'

# If you just want to compile the ns32k assembler, type 'make a32k'

# To make the 68020 assembler compile as the default, un-comment the next
# five lines (the first line starts with a:), and comment out the
# a: groups for the other assemblers.
#
#NOTE:  m68k.h should be a symbolic or hard-link to one of
# m-sun3.h , m-hpux.h or m-generic.h
# depending on which machine you want to compile the 68020 assembler for.
#
# To compile for HPUX, link m-hpux.h to m68k.h , un-comment the
# next two lines, and comment out the OPTIONS line below
# OPTIONS = -I../hp-include -I.
# LOADLIBES = -lGNU
#
# If you want the 68k assembler to be completely compatable with the the
# SUN one, un-comment the -DSUN_ASM_SYNTAX line below.
#
# If you machine does not have vfprintf, but does have _doprnt(),
# remove the # from the -DNO_VARARGS line below.
#
# If the return-type of a signal-hander is void (instead of int),
# remove the # from the -DSIGTY line below.
#
# To include the mc68851 mmu coprocessor instructions in the 68020 assembler,
# remove the # from the -Dm68851 line below.
#
# If you want the 68020 assembler use a register prefix character, un-comment
# the REGISTER_PREFIX line, and (maybe) change the '%' to the appropriate
# character.
#
# If you want the assembler to treat .L* or ..* symbols as local, instead of
# the usual L* symbols, un-comment the DOT_LABEL_PREFIX line.
#
# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr
# opcodes (unlike most 80386 assemblers), remove the # from
# the -DNON_BROKEN_WORDS line below.
#
# To compile 80386 Gas for the Sequent Symmetry, un-comment the -DEXEC_VERSION
# and the -DUSE_SYSTEM_HDR lines below.
#
# To compile gas for the HP 9000/300 un-comment the -DUSE_HP_HDR line below.
#
# For the ns32k, the options are 32532 or 32032 CPU and 32381 or 32081 FPU.
# To select the NS32532, remove the # from the -DNS32532 line below.
# To compile in tne NS32381 opcodes in addition to the NS32081 opcodes
# (the 32381 is a superset of the 32081), remove the # from the -DNS32381
# line below.
#
# For the ns32k on a Sequent, uncomment the SEQUENT_COMPATABILITY line below.
#
# If you want the .align N directive to align to the next N byte boundry,
# instead of the next 1<<N boundry, un-comment the OTHER_ALIGN line below.
# (This option is automatically enabled when building the sparc assembler.
#
O1 = # -DNO_VARARGS
O2 = # -DNON_BROKEN_WORDS
O3 = -Dm68851
O4 = # -DEXEC_VERSION=1
O5 = -DSIGTY=void
O6 = # -DNS32532
O6 = # -DNS32381
O7 = # -DDOT_LABEL_PREFIX
O8 = # -DSEQUENT_COMPATABILITY
O9 = # -DREGISTER_PREFIX=\'%\'
O10= # -DOTHER_ALIGN

G1 = # -DUSE_SYSTEM_HDR
G2 = # -DUSE_HP_HDR
G3 = # -DSUN_ASM_SYNTAX

OPTIONS = -Datarist=1 $(O1) $(O2) $(O3) $(O4) $(O5) $(O6) $(O7) $(O8) $(O9) $(O10)
a:	a68
	@rm -f a
	@ln a68 a
lint:	lint_68k

# To make the VAX assembler compile as the default, un-comment the next five
# lines, and comment out the a: group of lines for the other assemblers.
#OPTIONS =
#a:	avax
#	@rm -f a
#	@ln avax a
#lint:	lint_vax

# To make the 80386 assembler compile as the default, un-comment the
# next five lines, and comment out the 'a:' groups for the other assemblers.
#OPTIONS =
#a:	a386
#	@rm -f a
#	@ln a386 a
#lint:	lint_386

# To make the ns32k assembler compile as the default, un comment the
# next five lines, and comment out the 'a:' groups for the other assemblers.
#OPTIONS =
#a:	a32k
#	@rm -f a
#	@ln a32k a
#lint:	lint_32k
#

CC=$(CROSSBIN)/cgcc
CFLAGS = -O -I. -I$(CROSSINC) $(OPTIONS)
LDFLAGS = $(CFLAGS)
# To compile gas on a System Five machine, comment out the two lines above
# and un-comment out the next three lines
# CFLAGS = -g -I. -DUSG $(OPTIONS)
# LDFLAGS = $(CFLAGS)
# LOADLIBES = -lmalloc -lPW

a =\
as.o		xrealloc.o	xmalloc.o	hash.o		hex-value.o \
atof-generic.o	append.o	messages.o	expr.o		app.o \
frags.o		input-file.o	input-scrub.o	output-file.o	 \
subsegs.o	symbols.o					version.o \
flonum-const.o	flonum-copy.o	flonum-mult.o	strstr.o	bignum-copy.o \
obstack.o


y =\
m68k.o		atof-ieee.o read.o write.o stack.o
Y = m68k.c atof-ieee.c m68k-opcode.h m-hpux.h m-sun3.h m-generic.h

a68: $a $y
	$(CC) -o a68 $(LDFLAGS) $a $y $(LOADLIBES)

atof-ieee.o:	flonum.h

hash.o:	hash.c
	$(CC) -c $(CFLAGS) -Derror=as_fatal hash.c

xmalloc.o:	xmalloc.c
	$(CC) -c $(CFLAGS) -Derror=as_fatal xmalloc.c

xrealloc.o:	xrealloc.c
	$(CC) -c $(CFLAGS) -Derror=as_fatal xrealloc.c

m68k.o:		gnu-out.h as.h expr.h flonum.h frags.h hash.h
m68k.o:		m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h

app.o:		as.h

as.o:		gnu-out.h as.h read.h struc-symbol.h write.h
atof-generic.o:	flonum.h
bignum-copy.o:	bignum.h
expr.o:		gnu-out.h as.h expr.h flonum.h obstack.h read.h struc-symbol.h
expr.o:		 symbols.h
flonum-const.o:	flonum.h
flonum-copy.o:	flonum.h
flonum-mult.o:	flonum.h
flonum-normal.o:flonum.h
flonum-print.o:	flonum.h
frags.o:	gnu-out.h as.h frags.h obstack.h struc-symbol.h subsegs.h
hash.o:		hash.h
input-file.o:	input-file.h
input-scrub.o:	as.h input-file.h read.h
messages.o:	as.h
obstack.o:	obstack.h
read.o:		gnu-out.h as.h expr.h flonum.h frags.h hash.h md.h obstack.h
read.o:		read.h struc-symbol.h symbols.h
subsegs.o:	gnu-out.h as.h frags.h obstack.h struc-symbol.h subsegs.h write.h
symbols.o:	gnu-out.h as.h frags.h hash.h obstack.h struc-symbol.h symbols.h
write.o:	gnu-out.h as.h md.h obstack.h struc-symbol.h subsegs.h
write.o:	symbols.h write.h

flonum.h:					bignum.h

# app is no longer a separate process.
# app:	app.c
#	$(CC) -o app app.c
clean:
	rm -f a avax a68 a386 $a $w $x $y $z a core gmon.out bugs a.out

oprint:	oprint.o pp.o
	$(CC) $(LDFLAGS) -o oprint oprint.o pp.o


A =\
as.c		xrealloc.c	xmalloc.c	hash.c		hex-value.c \
atof-generic.c	append.c	messages.c	expr.c		bignum-copy.c \
frags.c		input-file.c	input-scrub.c	output-file.c	read.c \
subsegs.c	symbols.c	write.c				strstr.c \
flonum-const.c	flonum-copy.c	flonum-mult.c	app.c		version.c \
obstack.c

B =\
m68k.c		atof-ieee.c	stack.c

H = \
gnu.out.h		as.h		bignum.h	expr.h		flonum.h \
frags.h		hash.h		input-file.h	m68k-opcode.h	md.h	 \
obstack.h	read.h		struc-symbol.h	subsegs.h	i386.h	 \
symbols.h	vax-inst.h	vax-opcode.h	write.h		i386-opcode.h \
m-sun3.h	m-generic.h	pmmu.h		m-hpux.h	ns32k-opcode.h

# JF unused	flonum-normal.c	flonum-print.c cpystr.c

lint_68k:
	lint -I. $A $B

gas-dist.tar: COPYING README $A $B $C $D $E $H $V Makefile
	tar cvf gas-dist.tar COPYING README $A $B $C $D $E $H $V Makefile

gas-dist.tar.Z:	gas-dist.tar
	compress < gas-dist.tar > gas-dist.tar.Z

dist:	gas-dist.tar gas-dist.tar.Z

install:	a