Kwik Disk Configuration Editor
				Copyright 1990
			       Magnum  Software



HISTORY:

	Kwik Disk was first released as a Desktop Accessory in August 1988. It
was intended to increase the access time for reading and writing to the floppy
drives. As it was continually updated, we added the ability to select the
seekrate for each drive separately, increased drive access speed and optimised
the accessory to be as fast as possible and use as little memory as possible.

	Next we came up with a Kwik Disk program that would run from the AUTO
folder. This would install Kwik Disk at boot-up and use as little memory as
possible. Later it was further optimised until it would use LESS THAN 600
BYTES!

OUR LATEST DEVELOPMENT:

	All this was great. We had increased our access speed to as much as
200% while using a minimal amount of memory so, what else could we possibly do
to further improve this wonderful utility? Three things had not yet been done
until now:

	1) A configuration program 
		(for the user to enter his/her own settings for boot-up time)

	2) Compatability with all present and future versions of TOS

	3) A version of Kwik Disk that would load from the bootsector
		of a floppy-disk and USE NO MEMORY AT ALL!

Every one of the above features are built in to the new Kwik Disk Configuration
Editor (refered to as KDCE hereon).

	The KDCE will create a custom version of the Kwik Disk Accessory, Auto
Program and/or Bootsector Program tailored by you and specifically for your
computer system.

NOTE: You Must Create A Version of Kwik Disk For Each System You Own, or a
	New Version Each Time You Update Your Version of TOS. The KDCE Is What
	Senses What Version Of TOS It Is Running Under, NOT THE ACCESSORY OR
	PROGRAMS IT CREATES.

	There is no need to worry where to put the KDCE. It will determine
what drive the system was booted from and write the Accessory and Auto Program
to that drive. For the Auto Program, it will place it in the AUTO folder if
present or first create one if not. The Bootsector Program will ALWAYS be sent
the the disk in drive A.

	Once inside the KDCE you will see the settings you can make and the
buttons to create the files. The Kwik Disk Accessory will set you screen colors
at boot-up so, there are numbers for setting the colors. Select what color you
wish to change (i.e. Screen, Text....), then, with the mouse and its left
button, click on each number to change the color. Sorry, STE colors are not
supported but will be to registered users.

SHAREWARE PLEA:

	Yes, here it is. The plea for your generous support. You now know that
Kwik Disk has altogether been a project for over 2 years. It may be small but
that was the intent and, its usefulness is quite big. More time was put into
this little utility than many of you may have thought. We feel that a request
of $7.00 is a reasonable justification for all the long hard work of creating
Kwik Disk. If you like it, and use it, please mail a check or money order to:

				Magnum Software
				KDCE 100
				2871 S. 124th St.
				Milwaukee, WI 53227

We will then send you a disk with the latest version of the Kwik Disk
Configuration Editor and demos of our latest products. For a list and prices
of our latest products, send a SASE to the address above.

Comments and Questions can be directed to the above address or:

			on CompuServe: 72550,2542

			on GEnie: MAG.SOFTWARE