DPHD
0Nix
Nix|
1Disk description
These gadgets are used to give further information about
the contents of a disk, for example filenames or copyright...

If "AutoWrite" is active and the "return" key is pressed in
the 7th string gadget, the actual label is automatically
written into data memory.|
2>|
3>|
4>|
5>|
6>|
7Disk name
Enter the name and number of the disk here,
for example "Fred Fish #567".

This text appears on the front of the label and on the
headline.|
8Disk type
General information about the disk, for example
"Amiga freeware", "Amiga FD Software", "Backup Disk".|
9>|
10Clear string gadgets
The seven disk description gadgets and the diskname gadget
are cleared and the disktype gadget is filled with one of
the disktypes specified in the preferences window.|
12Increase number
Increases the number by 1|
13Decrease number
Decreases the number by 1|
14Append number
Appends the number to the diskname. If "App. # to diskno"
is on (see preferences window), a "#" char is appended
before the number|
18Save label file
Opens a file requester where the name for the file to save
can be chosen.|
19AutoIncreased
If on, the number is increased by one every time the
"C" gadget is selected.|
20AutoWrite
If the "Return" key is pressed in the 7th disk description
gadget, the actual label is written into data memory.

If "FishContents" is used, the label is automatically written
into label memory if processing of the contents file was
successful.|
21Load label file
Load a label file into memory. A file requester is opened.|
22Jump to next label
Jump to next label in label memory (if available).

(Keyboard equivalent: cursor right)|
23Jump to previous label
Jump to previous label in label memory (if available).

(Keyboard equivalent: cursor left)|
24Change write mode
If mode is "append", the label will be appended after the last label
in memory every time the label is written into memory.

If the mode is "edit", the currently shown gadget will overwrite the
actual label in label memory (adjusted with the "+"/"-" gadgets).
=> Used to correct mistakes in labels.|
25Write label into memory
The currently shown label is written into label memory
with the mode of the mode gadget:

yIf mode is "append", the label will be appended after the last label
in memory every time the label is written into memory.

If the mode is "edit", the currently shown gadget will overwrite the
actual label in label memory (adjusted with the "+"/"-" gadgets).
=> Used to correct mistakes in labels.|
26Print label
Prints the label.

-- The printer driver must be set correctly with the --
-- workbench preferences program! --|
27Search
Search a string (for example a file name) in label
memory and then display this label).|
28Search number
Search a special label number in label memory

(For example, search FishDisk 411, TBAG 41, ... by
adjusting the number and then search with this
gadget).|
29Clear memory
Clears all data contain in label memory!|
37Fish Contents
Loads the contents (with version numbers) of a fishdisk
(AmigaLibDisk) by scanning the "contents" file.|
38Directory Tool
Use your mouse to create a label by reading in the disk
directory and then clicking on the entries to be copied
on the label...|
39Preferences
This requester is used to change the settings of DiskPrint,
for example the contents of the custom gadgets, the type of
labels you use, the "layout" of the labels and the pathname
where all label data files are located.|
40Width
Change the width on the printout of the diskname.
(Choose between double width=5 cpi and single width=10 cpi)
(cpi = characters per inch)|
41Change DiskType
One of the three DiskTypes entered in the prefs window
can be chosen with this gadget.|
42Multiple Print / Range print
To use this function, a minimum of 2 labels should be accessible
label memory.
In this requester you'll find 3 action gadgets:

1. Print a range
- Prints a range of labels available in label memory. For example,
labels for Fishdisk 400-500 can be printed in one turn.

2. Print a label multiple
- Prints a label multiply, for example, print out 100 labels for
Fishdisk 400 in one turn.

3. Print all marked labels
Prints out all marked labels|
43- QUIT -
Use this gadget to quit DiskPrint!

(To quit only the help mode, click on "Help" again!)|
47Disk-# Proportionalgadget
Use the slider to change the disk number.|
48Change the range
Change the range of the slider.

(There are two ranges: 0 to 499 and 500 to 999)|
49Edit data mem
Some routines to edit the contents of the label memory:

LABEL
- DELETE: Deletes the label at the actual position.
- INSERT BLANK: Inserts a blank label at the actual position.
- CLONE LABEL: Doubles the label at the actual position.

MARKS:
- CLEAR ALL: Clears all marks of the labels in label memory.
- MARK ALL: Marks all labels in label memory.
- REVERSE: Marked labels become unmarked, unmarked become marked.|
50Iconify
Closes the DiskPrint screen and opens a small window on the
workbench. Click on this window with the left and then width the
right button to reactivate DiskPrint.|
51Delete File
After the file requester has opened, select the label file to be
deleted. Be careful, this file will be lost forever!|
52Help mode...
Gives a short description on every gadget.

(To quit help mode, press on the "Help" gadget again)|
53Boldface
Toggles boldface for this line (on the printout).
Black gadget means boldface is on,
White gadget means it's off.|
54>5|
55>5|
56>5|
57>5|
58>5|
59>5|
200>5|
201>5|
60Color
If this gadget is blue, this line will be printed in the color
selected in the prefs window. Otherwise the line will be printed
black.|
61><|
62><|
63><|
64><|
65><|
66><|
202><|
80Fishcontents drive
Use this gadget to select the drive you want to load the contents
file for "Fish Contents" from. "0" means df0:, "1" means df1: ...
"C" means the drive entered in the prefs window is used.|
205Mark a label
With this gadget, you can mark some labels in label memory.
Labels only become marked if you hit the ">label into mem"
gadget after having marked the gadget.
(The write mode should be "edit", of course)|
203FD-Series
These gadgets contain names of famous FD series, for example
the "Fred Fish" serie. Click on one of these names to "transmit"
it into the diskname gadget.

The right 3 gadgets are freely configurable.

By clicking on it with the right mouse button, all label data
files with this name contained in the directory entered in the
prefs window will be shown. Then, choose one to be loaded.|
998Keyboard equivalents
left/right cursorkeys - go forward/backward in label mem.
cursor up - change disktype
del - clear all string gadgets
+ and - (keypad) - Increase/decrease number by 1.
[ and ] (keypad) - Increase/decrease number by 10.
* (keypad) - Change range of slider
/ (keypad) - Search disk number in label mem
ENTER (keypad) - Print label
4 (keypad) - Jump to first label in label mem
6 (keypad) - Jump to last label in label mem
5 (keypad) - Change mark
F1 - Prefs, F10 - reselect last clicked gadget
TAB - Sleep (Iconify), ESC - Quit DiskPrint|
999XX
XX|
*
