June 21st 1991 Term II version 1.1 (c) 1990-1991 - Eric GONTIER README This is Term II, a communication program for the Amiga. It needs a Workbench 2.0x version (or above to run). It supports external protocol through XPR libraries, provides a number of commands which can be used from ARexx to build scripts. These command can also sent by external processes through a mechanism called XCMD. I try to make an English version. However, my Englich clearly not perfect, but I have done my best to provide an English documentation as cleared as possible. Feel free to send me your suggestions or criticisms about the program : I will try to include them in future releases (if any) or Term II. My smail and email addresses can be found at the end of this file. Term II has been tested with an Amiga 2000 and an Amiga 3000, and also with the A2232 multi-serial board. Term II is freeware : you can use it and distribute it freely, however you cannot make any commercial use of it, and all files in this distribution must be kept together. This program was written with DICE 2.06.15, Matt Dillon's shareware C compiler (DICE stands for Dillon's Integrated C Environment). To write me : UNTIL March 1992 : Eric GONTIER Dolisos Canada Inc. 1400 Hocquart Saint-Bruno, Quebec, Canada J3V 6E1 UUCP : eric%dolisos@CAM.ORG ou eric@dolisos.UUCP Electronic Image BBS : (514) 937-9984 : Eric Gontier AFTER March 1992 : Eric GONTIER 52 rue des Rouets 59610 FOURMIES FRANCE RCI-Calvacom : EG19 UUCP : ?