NAME									NAME

	ALoad	- show the loadfactor of your machine

VERSION = 1.1c


DESCRIPTION							  DESCRIPTION


This little tool will show the loadfactor on your machine.
I have wrote the program using some functions in the new
KICKSTART 2.0, so it will only run on a machine with KICK-
START 2.0 (sorry).

USE:	ALoad 
	in your startup-sequence or better put it in the
	SYS:WBStartup drawer, and it will be started as 
	soon as the workbench is started.

NOTE:	The INFO-FILE must be in the same directory as 
	ALoad !!!!


You can add following description to your INFO-FILE :

	WINDOW=x_pos/y_pos/width/height
	TIME=time_cnt
	FACTOR=value

	x_pos,y_pos	....	This is the position of the upper left edge.
	width,height	....	This is the size of the window.
				Because of the windowborder the real 
				displaysize will be smaller.

	time_cnt	....	This is the number of vertical blanking 
				after ALoad will update it's display.

	value		....	This a integer between 1 and 31.
				It controls the speed the peak
				accelerated.
				1 means  very fast.
				31 means very slow
				the best value i found is 28 (26 is default)

Now you can modify the position and size and time and factor 
buy simply closing the Window. (than you get the preference window)

If the window don't fit in the WBScreen, so the new
functions I used will correct it automaticly.

ALoad will close it's window if someone wants to close the Workbench
with the <CloseWorkBench>-Function from Intuition.
It will reopen it if the <CloseWorkBench>-Function failed or if
someone calls the <OpenWorkBench>-Function.


ALoad will monitor the loadfactor of your machine even
	- window is closed (that means the workbench is closed)
	- the blitter is owned by someone
	- the workbench-screen is locked via LockLayerInfo
	- Forbid() was called
but it will not update its display ,unless the system returns to 
normal !

COPYRIGHT						       COPYRIGHT


	Date :	24. seg. 1991

			ALoad	V1.1b
			The Loadfactor

	Written by 	Alexandru-Aurel Balmosan
			Siewecke Str. 39c
			4830 Gueterloh 1 Germany

This tool is Freeware as long as you leave the WINDOW-TITLE unchanged.
<ALoad> is free to be spread on public-domain and shareware disks as long as
they are sold for a reasonable charge that is less than $6. For use in
commercial products the permission of the author is required. <ALoad> may also
be uploaded on INTERNET-FTP-servers.

Thanks for the INFO-File goes to Dirk Boehmer.
Also thanks for additional ideas goes to Matthias Scheler.

If you have questions about this tool connect me 
be mail or even better email.

my email-adresse is :

	aurel@uni-paderborn.de

---------------------------