====================================== === Printer Stealer === ====================================== (C) FLam == A.Livshits & J-M.Forgeas == 1987 PrinterStealer: -------------- This utility is destinated to replace a printer connected to AMIGA by a file. PrinterStealer works by replacing the standard parallel.device ( or serial.device depending on Preferences ) by its own device that writes to a file all WRITE commands. PrinterStealer can be loaded from CLI or by an icon. Type into the string gadget a file name (if file already exists then it will be created anew ) to which you want the output to be send. At the moment you click on the START gadget, the Stealer device is created and linked to the system before the standard devices. Now, whenever you access PRT: (printer.device or a PRINT option in any software), the translated output for the printer installed with Preferences will be written to the file. You can pause/restart the process by clicking at SUSPEND gadget. To remove the stealer device press STOP gadget ( it will also close the file). EXAMPLE with DPaint: ------------------- Install the desired printer with Preferences. Then load DPaint and PrinterStealer. Load a picture with DPaint. Enter a file name into PrinterStealer string gadget and press START button. This will create the file and the stealer device. Choose PRINT option of DPaint. Then sit back and watch your drives turning.... After 'printing' this image, you can continue printing to the same file just by loading another image and choosing the PRINT option again. If you wish to print to another file, enter another file name to the PrinterStrealer's string gadget. The previously opened file will be closed, and a new one created. Enjoy! PrinterStealer can be freely distributed provided the Copyright notice is intact and NO commercial use is made with it without written permission of the author. For the sources of PrinterStealer please send 60$ to: Alexander Livshits, 15 rue Durantin, 75018 Paris, FRANCE