CrossDOS
                            Version 4.00a
                           July 12th 1990

This  is a very short file to inform users of the previous version of
CrossDOS (Version 3) of some of the IMPORTANT changes made in version
4.00.   If  the following recommendations are not adhered to you will
not be able to operate CrossDOS V4.00 successfully.

**********************
TDPatch12 or TDPatch13

First off, you CANNOT use "NOCLICK" or "tracksalv" with CrossDOS.  If
you are currently using either of them, get rid of it.

If  you  use  the  "Attach"  or "MountMF" programs, you can skip this
section.

In   the  past  version  of  CrossDOS,  running  the  "TDPatch12"  or
"TDPatch13" program was optional.  This time, IT IS NOT OPTIONAL.  If
you  are  running  with  Kickstart ROMs V1.2 or V1.3 you WILL need to
execute  "TDPatch12"  or  "TDPatch13"  respectively.   To execute the
"TDPatch" program, just type the following at the CLI (or shell):

    C:TDPatch13 (or C:TDPatch12)

You may elect to place this command in your S:startup-sequence before
the "mount" command that configures your drive as an MS-DOS drive.

"TDPatch12"   or   "TDPatch13"  should  be  transferred  to  your  C:
directory.

The  "Attach"  and  "MountMF"  (see below for more details) programs,
will execute the correct "TDPatch" program automatically.


**********************
MountMF

A  new  program  has  been  added to make your life even easier.  The
"MountMF"  program  is  designed  to  eliminate  having  to enter the
following in the CLI or your S:startup-sequence :

    TDPatch13
    mount di0: FROM DEVS:mountlist.msdosFS
    mount di1: FROM DEVS:mountlist.msdosFS
    mount di2: FROM DEVS:mountlist.msdosFS
    mount di3: FROM DEVS:mountlist.msdosFS

To perform the same function just enter the following:

    MountMF

That's all.  It will "mount" all the floppy drives that it detects in
your  system and determine which "TDPatch" program to run and proceed
to execute it.

Of course, you can continue to use the method previously described
but you must remember to execute the correct "TDPatch"

"MountMF"  can  also  be  executed  from  WORKBENCH  if  CrossDOS was
installed on your system.


*******************************************
Technical Support

Should you have any questions or problems, you can contact us at:

CONSULTRON
11280 Parkview
Plymouth, MI  48170

(313) 459-7271      9:00 AM - 5:00 PM EST

Thank you.