              HOW TO USE A FONTS BY GUBER .PRS FILE

     To enable the less experienced Word Perfect user to experience
the extreme flexibility of downloadable fonts, the following
directions should help you through the procedure for the first
time.  It is a great deal easier than the directions indicate, and
should work for all .PRS files that you receive.  Here we go:

     1.   Copy the .PRS file to the directory where you have your
          other .PRS files.
     2.   Press Shift F7, (S)elect Printer
               The screen should show the heading Print:Select
               Printer.
     3.   Press 2, Additional Printers
               The screen should show the heading Select Printers:
               Additional Printers.
     4.   Press 4, List Printer Files
               The screen should show the heading Select Printer:
               List Printer Files.  There will be a list of printer
               files on the screen, and you should see the printer
               file that you copied in step 1.  If you do not see
               it, then press F7 several times to exit, and repeat
               step 1.  If you do see the file that you copied,
               then cursor to it.
     5.   Cursor to the printer file and press 1.
               The screen should show the heading Printer Helps
               and Hints.
     6.   Press RETURN
               The screen should show the heading Select Printer: 
               Edit
     7.   Press 7, Path for Downloadable fonts
               Now you can tell the printer driver the path for
               where the fonts will reside.  When you have
               finished, press RETURN.  The screen heading will
               change back to Print:  Select Printer.
     8.   Press 1 Select Printer.  
               This is the most critical step, since once the
               printer has been set up, then it must be selected
               to operate properly and be used properly.  Press
               F7, exit twice, and you will go back to you
               document.
     9.   To check that the printer driver was installed properly,
          press CTRL F8, 4, and there should be additional strange
          fonts that you can use.  Cursor to the proper font, press
          1, Select, choose a point size and enter the rest of the
          document.  Your laser jet III will now love you.
     10.  If your document does not print out properly, then after
          you have sent the print job to the printer, press SHIFT
          F7, 4, Control printer and see what the problem is.  The
          majority of the time, an improper path has been specified
          and the font cannot be downloaded to the printer.